Mitsubishi Electronics Projector XD205U SD205U User Manual

DATA PROJECTOR 
MODEL 
XD205U
SD205U
User Manual 
This User Manual is important to you. 
Please read it before using your projector. 
EN
ENGLISH
 
 
XD205
SD205 

EN-2The lightning flash with arrowhead symbol within an equilatera
l triangle is intended to alert the user to the presence 
of uninsulated dangerous voltage within the product’s enclosure that may be of suffcient magnitude to constitute a 
risk of electric shock. 
The exclamation point within an equilateral triangle is intend ed to alert the user to the presence of important operat-
ing and maintenance (servicing) instructions  in the literature accompanying the appliance. 
WARNING 
Use the attached...

EN-3
ENGLISH
Contents
Important safeguards..........................................................................................................................4
Overview ....................................................................................................................... ......................6
Remote control ................................................................................................................. ..................8
Installation...

EN-4
Important safeguards
Please read all these instructions regarding your projector and 
retain them for future reference. Follow all warnings and 
instructions marked on the projector. 
1. Read instructions All the safety and operating instructions should be read 
before the appliance is operated. 
2. Retain instructions  The safety and operating instructions should be retained 
for future reference. 
3. Warnings  All warnings on the appliance and in the operating instruc-
tions should be adhered to....

EN-5
ENGLISH
WARNING: 
Unplug immediately if there is something wrong 
with your projector. 
Do not operate if smoke, strange noise or odor comes out of 
your projector. It may cause fire or electric shock. In this case, 
unplug immediately and contact your dealer. 
Never remove the cabinet. 
This projector contains high voltage circuitry. An inadvertent 
contact may result in an electric shock. Except as specifically 
explained in User Manual, do not attempt to service this prod-
uct by yourself....

EN-6
Overview
1FOCUS ring
2ZOOM ring
3 Control panel
4 Air outlet grille
5 Remote control sensor (Front)
6 Air inlet grille
7 Air inlet grille
8 Terminal board
9 Kensington Security Lock Standard connector
10 Air inlet grille
11 Speaker
Control panel
1 Power button
2 AUTO POSITION / S button
3 COMPUTER /  W button
4 MENU button
5STATUS indicator
6 POWER indicator
7 KEYSTONE/ENTER button
8 VIDEO/  X button
9 T button
Important:
 While the menu or the screen for the keystone adjustment 
or password entry...

EN-7
ENGLISH
Bottom side
1 Lamp cover
2 Adjustment feet
Caution:
Do not replace the lamp immediately after using the projector 
because the lamp would be extremely hot and it may cause 
burns.
Remote control
1 ON button
2 STILL button
3 AUTO POSITION button
4 ENTER button
5 MENU button
6 KEYSTONE button
7 +, - (VOLUME) buttons
8 VIDEO 1, 2 button
9 COMPUTER button
10 16 : 9 button
11 Direction buttons
12 PAGE UP / DOWN button
13 OFF button
14 MUTE button (Audio/Video)
 The + and - buttons are used in...

EN-8
Remote control
Battery installation
Use two AAA size batteries.
1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the arrow.
2. Load the batteries making sure that they are positioned correctly (+ to +, and - to -).  Load the batteries from - spring side, and make sure to set them tightly.
3. Replace the back cover.
Caution:
 Use of a battery of wrong type may cause explosion.
 Only Carbon-Zinc or Alkaline-Manganese Dioxide type batteries...

EN-9
ENGLISH
Installation
Layout of the projector
Image size varies depending on the distance between the screen and the projector.
Front projection
 The above figures are approximate and may be sl ightly different from the actual measurements.
Front projection, ceiling mounting
For ceiling mounting, you need the ceiling mount kit designed 
for this projector. Ask a specialist for installation.
For details, consult your dealer.

The warranty on this projector does not cover any damage 
caused by use...

EN-10
Basic connections
This projector can be connected with various devices such as a VCR, video camera, videodisc player, and personal computer that 
have analog RGB output connectors. 
Important: 
 Make sure that the connected device is turned off before starting connection. 
 Plug in the power cords of the projector and the connected devi ces firmly. When unplugging, hold and pull the plug. Do not pull the 
cord. 
 When the projector and the connected devices are located too close  to each other,...