Mitsubishi Ew270u Projector User Manual
Here you can view all the pages of manual Mitsubishi Ew270u Projector User Manual. The Mitsubishi manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
EN-31 ENGLISH 1. Repeat steps 1-2 above. 2. Press to highlight Volume and press / to select a desired sound level. Standby Audio Out Selecting On enables the function. The projector can output an Audio input signal when it is in standby mode and Audio input and Audio out jack is correctly connected to devices. Personalizing the projector menu display The On-Screen Display (OSD) menus can be set according to your preferences. The following settings do not affect the projection settings, operation,...
Page 32
EN-32 3D Watching 3D Content You can enjoy 3D Content with this projector. In order to watch 3D Content, you need to have the following items: 1. Field-sequential 3D video contents 2. DLP Link active electronic shutter glasses (Field-sequential: The system which displays alternately the image for the left eye and the right eye.) Play the field-sequential 3D video contents on a computer or DVD player, and then, connect the cable with the projector. Go to the DISPLAY menu, then, set the 3D option to On....
Page 33
EN-33 ENGLISH • The signals in the below table can be displayed with viewing 3D Contents on the projector. If a different signal is fed, the projector shows no 3D contents even with the 3D option set to On in the DISPLAY menu. • If DVD is run by 480p signals, 3D image may not be displayed correctly depending on the DVD player. • If 3D image is projected on the screen in 120Hz, the image may not appear on the screen depending on software of DVD player. Notes on danger to public health during watching 3D...
Page 34
EN-34 Supervising and controlling by computer With a proper LAN cable connection and LAN Control settings, you can operate the projector from a computer using a web browser when the computer and the projector are connected to the same local area network. This projector supports Crestron® software. An example of connecting the projector to computer. • When using an external hub or router, use a Category 5 straight cable. (A crossed cable can be used with some hubs and routers. See the appropriate...
Page 35
EN-35 ENGLISH Controlling the projector remotely through a web browser (e-Control™) Once you have the correct IP address for the projector and the projector is on or in standby state, you can use any computer that is on the same local area network to control the projector. When using this function, Adobe Flash Player has to be installed in your computer. Please download Adobe Flash Player from the website of Adobe Systems Incorporated. 1. Enter the IP address of the projector in the address bar of...
Page 36
EN-36 iv. Once set, access to the remote network operation page on this projector has been password-protected. To enable this function, check the box in front of Enable and type in your desired password in the New Password column and confirm the new password by re-entering the new password at the Confirm column. To disable password protection, uncheck the box. v. Once set, access to the Tools page has been password-protected. Refer to step iv for how to use the password function. • After making the...
Page 37
EN-37 ENGLISH Menu operation Menu system Please note that the on-screen display (OSD) menus vary according to the signal type selected. Main menu Sub-menu Options 1. DISPLAY Wall ScreenOff/Light Yellow/Pink/Light Green/Blue/ Blackboard Aspect Ratio Auto/Real/Full/4:3/16:9 Keystone Position Phase H. Size Magnify 3D On/Off 3D Sync 1/2 2. PICTURE SettingBrightest/Presentation/Normal/Theater/ User 1/User 2 Brightness Contrast Color Tint Sharpness BrilliantColor™ On/Off Color Temperature T1/T2/T3/T4 3D Color...
Page 38
EN-38 Note that the menu items are available when the projector detects at least one valid signal. If there is no equipment connected to the projector or no signal detected, limited menu items are accessible. 4. SYSTEM SETUP: Basic Projector PositionFront Table/Rear Table/Rear Ceiling/ Front Ceiling Auto Power OffDisable/5 min/10 min/15 min/20 min/25 min/30 min Blank TimerDisable/5 min/10 min/15 min/20 min/25 min/30 min Panel Key Lock On/Off Timer ControllerDisable/30 min/1 hr/2 hr/3 hr/4 hr/8 hr/12...
Page 39
EN-39 ENGLISH Description of each menu FUNCTIONDESCRIPTION Wall ScreenCorrects the projected picture’s color when the projection surface is not white. See Using Wall Screen on page 28 for details. Aspect RatioThere are four options to set the images aspect ratio depending on your input signal source. See Selecting the aspect ratio on page 25 for details. KeystoneCorrects any keystoning of the image. See Correcting keystone on page 24 for details. Position Displays the position adjustment page. To...
Page 40
EN-40 FUNCTIONDESCRIPTION SettingPre-defined picture modes are provided so you can optimize your projector image set-up to suit your program type. See Selecting a picture mode on page 26 for details. BrightnessAdjusts the brightness of the image. See Adjusting Brightness on page 27 for details. ContrastAdjusts the degree of difference between dark and light in the image. See Adjusting Contrast on page 27 for details. ColorAdjusts the color saturation level -- the amount of each color in a video...