Mitsubishi Ew330u Projector User Manual
Here you can view all the pages of manual Mitsubishi Ew330u Projector User Manual. The Mitsubishi manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 11
EN-11 ENGLISH Positioning your projector Choosing a location Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and position of your screen, the location of a suitable power outlet, as well as the location and distance between the projector and the rest of your equipment. Your projector is designed to be installed in one of the possible installation locations: For ceiling mounting, you need the ceiling mount kit designed for...
Page 12
EN-12 Obtaining a preferred projected image size The distance from the projector lens to the screen, the zoom setting (if available), and the video format each factors in the projected image size. 4:3 is the native aspect ratio of EX320U. To be able to project a complete 16:9 (widescreen) aspect ratio image, the projector can resize and scale a widescreen image to the projectors native aspect width. This will result in a proportionally smaller height equivalent to 75% of the projectors native aspect...
Page 13
EN-13 ENGLISH How to determine the position of the projector for a given screen size 1. Determine the aspect ratio of your screen, 16:9 or 4:3. If you have a 4:3 screen, refer to the table labeled (Standard). If you have a 16:9 screen, refer to the table labeled (16:9). 2. Select your screen size. 3. Refer to the table and find the closest match to your screen size in the left columns labeled Screen. Using this value, look across this row to the right to find the corresponding average distance from...
Page 14
EN-14 Layout of the projector Image size varies depending on the distance between the screen and the projector. Front projection (Standard) EX320U EW330U Screen Distance from the screen: L Hd Diagonal Size Width: W Height: H Shortest (Wide) Longest (Tele) inch cm inch cm inch cm inch m inch m inch cm 40 102 32 81 24 61 48 1.2 63 1.6 2 5 60 152 48 122 36 91 73 1.8 94 2.4 3 7 80 203 64 163 48 122 97 2.5 126 3.2 4 9 100 254 80 203 60 152 121 3.1 157 4.0 5 11 120 305 96 244 72 183 145 3.7 189 4.8 5 14 150...
Page 15
EN-15 ENGLISH (16:9) EX320U EW330U The above figures are approximate and may be slightly different from the actual measurements. Mitsubishi recommends that if you intend to permanently install the projector, you should physically test the projection size and distance using the actual projector in suit before you permanently install it, so as to make allowance for this projectors optical characteristics. This will help you determine the exact mounting position so th at it best suits your installation...
Page 16
EN-16 Connection When connecting a signal source to the projector, be sure to: 1. Turn all equipment off before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly inserted. • See the owner’s guide of each device for details about its connections. • Contact your dealer for details about its connections. • In the connections shown below, some cables may not be included with the projector. They are commercially available from electronics stores....
Page 17
EN-17 ENGLISH Connecting a monitor If you want to view your presentation close-up on a monitor as well as on the screen, you can connect the MONITOR OUT signal output jack on the projector to an external monitor following the instructions below: To connect the projector to a monitor: 1. Connect the projector to a computer as described in Connecting a computer on page 16. 2. Connect the RGB cable from the monitor to the MONITOR OUT jack of the projector. • Once the Standby Monitor Out function is on, the...
Page 18
EN-18 Connecting an HDMI device You should use an HDMI cable when making connection between the projector and HDMI devices. To connect the projector to an HDMI device: 1. Take an HDMI cable and connect one end to the HDMI output port of the video device. 2. Connect the other end of the cable to the HDMI input port on the projector. In the unlikely event that you connect the projector to a DVD player via the projectors HDMI input and the projected picture displays wrong colors, please change the color...
Page 19
EN-19 ENGLISH The final connection path should be like that shown in the following diagram: If the selected video image is not displayed after the projector is turned on and the correct video source has been selected, check that the Video source device is turned on and operating correctly. Also check that the signal cables have been connected correctly. Connecting an S-Video source device Examine your Video source device to determine if it has an unused S-Video output socket available: • If so, you...
Page 20
EN-20 Connecting a composite Video source device Examine your Video source device to determine if it has a set of unused composite Video output sockets available: • If so, you can continue with this procedure. • If not, you will need to reassess which method you can use to connect to the device. To connect the projector to a composite Video source device: 1. Take a Video cable and connect one end to the composite Video output socket of the Video source device. 2. Connect the other end of the Video cable...