Mitsubishi Xd211u Data Projector User Manual
Here you can view all the pages of manual Mitsubishi Xd211u Data Projector User Manual. The Mitsubishi manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 1
DATA PROJECTOR MODEL XD211U User Manual XD211U This User Manual is important to you. Please read it before using your projector. ENGLISH
Page 2
EN-2The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsu- lated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING Use the attached...
Page 3
EN-3 ENGLISH Contents Important safeguards................................................................................................................................ 4 Overview ................................................................................................................................................... 6 Remote control ......................................................................................................................................... 8 Installation...
Page 4
EN-4 Important safeguards Please read all these instructions regarding your projector and retain them for future reference. Follow all warnings and instructions marked on the projector. 1. Read instructions All the safety and operating instructions should be read before the appliance is operated. 2. Retain instructions The safety and operating instructions should be retained for future reference. 3. Warnings All warnings on the appliance and in the operating instructions should be adhered to....
Page 5
EN-5 ENGLISH WARNING: Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your pro- jector. It may cause fire or electric shock. In this case, unplug immedi- ately and contact your dealer. Never remove the cabinet. This projector contains high voltage circuitry. An inadvertent contact may result in an electric shock. Except as specifically explained in User Manual, do not attempt to service this product by yourself. Please...
Page 6
EN-6 Overview 1FOCUS ring 2ZOOM ring 3 Remote control 4 Air inlet grille 5 Speaker 6 Remote control sensor (Front) 7 Adjustment feet (front) 8 Remote control lock button 9 Kensington Lock 10 Remote control sensor (Top) 11 Terminal board 12 Air outlet grille 13 Power jack 14 Security lock Caution:Do not replace the lamp immediately after using the pro- jector because the lamp would be extremely hot and it may cause burns. Kensington LockThis projector has a Kensington Security Standard con- nector for...
Page 7
EN-7 ENGLISH Overview (continued) Bottom side 1 Adjustment feet 2 Lamp cover Remote control 1 ON button 2 KEYSTONE/VOLUME UP, DOWN buttons 3 MENU button 4 Direction buttons 5 ENTER button 6 COMPUTER button 7 VIDEO button 8 FREEZE button 9 AV (Audio/Video) MUTE button 10 ASPECT button 11 AUTO POSITION button 12 STANDBY button • The UP and DOWN buttons are used in the KEY- STONE adjustment in addition to the volume control. Important:• This projector is equipped with two remote controls. One is installed...
Page 8
EN-8 Remote control This projector is equipped with two remote controls. One is installed on the top of the set; the other is come with the package. For the first time use: 1. To release it from the set, press the remote control lock button, and the remote control will eject automatically. 2. Remove the transparent insulation tape by pulling it before use. For battery change: 1. Remove the battery holder. 2. Remove the old Lithium coin cell and install new one (CR2025). Ensure that the side with the...
Page 9
EN-9 ENGLISH Installation Layout of the projectorImage size varies depending on the distance between the screen and the projector. Front projection • The above figures are approximate and may be slightly different from the actual measurements. Front projection, ceiling mountingFor ceiling mounting, you need the ceiling mount kit designed for this projector. Ask a specialist for installation. For details, consult your dealer. • The warranty on this projector does not cover any damage caused by use of...
Page 10
EN-10 Basic connections This projector can be connected with various devices such as a VCR, video camera, videodisc player, and personal computer that have analog RGB output connectors. Important: • Make sure that the connected device is turned off before starting connection. • Plug in the power cords of the projector and the connected devices firmly. When unplugging, hold and pull the plug. Do not pull the cord. • When the projector and the connected devices are located too close to each other, the...