Motorola C333 Manual

							29
Learning to Use Your Phone
When you enter text using the standard tap method (see 
page 30), the flashing cursor changes to a block cursor, 
and the soft key functions change:
Choosing a Text Mode
Multiple text entry modes make it easy for you to enter 
names, numbers, and messages.
Press 
M from any text entry screen to select a text mode:
Note: The text mode you select remains active until you 
select another mode.
iTAP 
(
é)Let the phone predict each word as you 
enter it (see page 31).
Tap Method 
(
t)Enter letters, numbers, and symbols by 
pressing a key one or more times (see 
page 30).
Numeric 
(
è)Enter numbers only.
Symbol 
(
ê)Enter symbols only (see page 35).
Msg:
T
DELETE OK
PressOK(+)
to accept
and store
the text.
Press 
DELETE(-)
to clear the last letter. Block cursor
indicates
current
highlighted
character.After 2 seconds, the block 
cursor reverts to a flashing 
cursor and moves to the 
next position.
59
G 
						

							30
Learning to Use Your Phone
Using Tap Method
This is the standard mode for entering text on your phone.
Press 
M from a text entry screen and select Tap Method.
Tap Method Text Entry Rules
Press a number key repeatedly to cycle through its 
characters. See “Character Chart” on page 31.
If you do not press a key for 2 seconds, the character 
in the block cursor is accepted, and the cursor moves 
to the next position.
Press S left or right to move the flashing cursor to 
the left or right in a text message.
The first character of every sentence is capitalized. 
Press 
S down to force the character to lowercase 
while it is highlighted by the block cursor.
Your phone may support multiple languages. The 
current language setting determines whether a new 
message begins on the left or right side of the display.
You can switch languages within a message. Press 
M 
to select the text mode and language you want to use.
PressTo
1
A number key 1 
or more timesselect a letter, number, or 
symbol shown in the 
“Character Chart” on page 31
2Number keys enter the remaining 
characters
3OK(+) store the text 
						

							31
Learning to Use Your Phone
If you enter or edit information and do not want to save 
your changes, press 
O to exit without saving.
Press and hold a number key to cycle between tap 
method and numeric text entry mode.
Character Chart
Use this chart as a guide for entering characters with the 
tap method.
Note: This chart may not reflect the exact character set 
available on your phone.
Using iTAP™ Software Text Entry Method
iTAP™ software is a predictive text entry method that lets 
you enter a word using one keypress per letter.
Press 
M from any text entry screen and select iTAP.
1 space . 1 ? ! , @ _ & ~ : ;  -
( )  ¿ ¡ % £ $ ¥ 
 
2 
a b c 2 ä å á à â ã   α β ç
3 
d e f 3 δ ë é è ê ε φ
4  g h i 4 ï í î γ η ι
5  j k l 5 κ λ
6  m n o 6 ñ ö ø ó ò ô õ µ υ ω
7 
p q r s 7 π ß σ
8 
t u v 8 θ ü ú ù û τ
9 
w x y z 9 ξ ψ
0  + - 0 x * /  [ ] = > < # § 
						

							32
Learning to Use Your Phone
Note: You can switch languages within a message in iTAP 
text mode. Press 
M to select the language.
Entering Words
Do ThisTo
1
Press a number 
key one timeenter the first letter of the 
word
The letters associated with 
the key are shown at the 
bottom of the display.
2Press number 
keys (one per 
letter)enter the rest of the word
Alternative words and letter 
combinations are shown at 
the bottom of the display. The 
word choices are updated 
with each keypress.
3Press Shighlight the word you want
4Press 
SELECT(+)enter the word at the flashing 
cursor
A space is automatically 
inserted after the word. 
						

							33
Learning to Use Your Phone
For example, to spell the word “art,” press 2 7 8. 
The display shows:
Entering Novel Words
If the word you want is not displayed by the iTAP software:
Do ThisTo
1
Press DELETE(-) 
one or more timesdelete letters until you 
see a letter combination 
that matches the start of 
the word
2Press S left or righthighlight the letter or 
letter combination
3Press SELECT(+), 
then press 
S to the 
leftshift the cursor to the left 
and “lock” the selected 
word portion
4Continue to enter 
letters and highlight 
letter combinationsspell the word
ArtApt Cpu Cst Cruc
DELETE SELECT
Press SELECT(+) to
insert the highlighted word. Press DELETE(-)
to clear the last letter.Flashing
cursor
indicates
insertion
point.Press 
S to 
see additional 
word choices.59
G 
						

							34
Learning to Use Your Phone
Entering Punctuation
Using Capitalization
The first word of a sentence is automatically 
capitalized, with the words that follow in lowercase.
Entering Numbers
PressTo
0 or 1enter punctuation or other 
characters (see “Character 
Chart” on page 31).
PressTo
S up or downchange the words to initial 
character capitalized, all 
uppercase characters, or all 
lowercase characters
Do ThisTo
1
Enter the first 
digit and then 
highlight itput the iTAP software in 
number entry mode
2Press number 
keysadd digits to the number
3Press 
SELECT(+)enter the number 
						

							35
Learning to Use Your Phone
Deleting Letters and Words
Place the cursor to the right of the text you want to delete, 
and then:
Using Symbol Mode
To enter symbol characters in a message, press 
Mfrom any text entry screen and select Symbol.
Do ThisTo
Press DELETE(-) delete one letter at a time
Hold 
DELETE(-) delete the entire message
Do ThisTo
1
Press a number 
key one timedisplay its symbol options at 
the bottom of the display
See “Symbol Chart” on 
page 36.
2Press S
or
Press the 
number key 
repeatedlyhighlight the symbol you want
3Press 
SELECT(+)enter the symbol 
						

							36
Learning to Use Your Phone
Symbol Chart
Use this chart as a guide for entering characters in symbol 
mode.
Locking and Unlocking Your 
Phone
You can lock your phone manually or set the phone to lock 
automatically whenever you turn it off.
A locked phone still rings or vibrates for incoming calls or 
messages, but you must unlock it to answer. To use a 
locked phone, enter the unlock code. 
You can make emergency calls on your phone even when 
it is locked. For more information, see page 46.
1 
space . ? ! , @ _ & ~ : ;  - ( )  ¿ ¡ % £ $ ¥   
2  @ _ \
3 / : ;
4  & 
5  ( ) [ ] { }
6 ¿ ¡ ~
7  < > =
8 
$ £ ¥   
9  # % *
0  + - x * / = > < # § 
						

							37
Learning to Use Your Phone
Lock Your Phone Manually
Unlock Your Phone
Tip: Your phone’s unlock code is set to 1234 at the 
factory. Many service providers reset the unlock code to 
the last four digits of your phone number.
At the 
Enter Unlock Code prompt:
Set Your Phone to Lock Automatically
You can set your phone to lock every time you turn it off.
Find the FeatureM>Settings >Security 
>
Phone Lock 
>
Lock Now
PressTo
1
keypad keys enter your unlock code
2OK(+) lock the phone
PressTo
1
keypad keys enter your unlock code
2OK(+) unlock your phone
Find the FeatureM>Settings >Security 
>
Phone Lock 
>
Automatic Lock >On
PressTo
1
keypad keys enter your unlock code
2OK(+) activate automatic lock 
						

							38
Learning to Use Your Phone
Changing a Code or Password
Your phone’s four-digit unlock code is set to 1234, and the 
six-digit security code is set to 000000 at the factory. Your 
service provider may reset these numbers before you 
receive your phone.
If your service provider has not reset these numbers, we 
recommend that you change them to prevent others from 
accessing your personal information. The unlock code 
must contain four digits, and the security code must 
contain six digits.
To change a code or password:
If You Forget a Code or 
Password
If you forget your security code, contact your service 
provider.
If you forget your unlock code, try entering 1234 or the last 
four digits of your phone number. If that does not work, at 
the 
Enter Unlock Code prompt:
Find the FeatureM>Settings >Security 
>
New Passwords
PressTo
1
M  display the unlock code 
bypass screen
2keypad keys enter your security code
3OK(+) submit your security code