Home > Motorola > Phone > Motorola I58sry User Guide

Motorola I58sry User Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Motorola I58sry User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 249 Motorola manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							11
    Turning Your i 58sr Phone On/Off
    NOTE: Your phone’s screen backlight will remain lit while the battery is
    charging.
    Battery Charging Status
    The battery strength indicator icon found on your phone’s display screen shows
    the amount of power in the battery.
    When Using Phone
    A short, chirp-like sound indicates a low battery. The icon flashes to indicate
    that you have approximately five minutes of talk time remaining.
    When Charging Battery
    Tu r n i n g Yo u ri58srPhone On/Off
    NOTE: To register for the first time on the Nextel National Network, you
    must turn on youri58srphone in your local calling area.
    To power the phone on:
    Icon
    Displayabcd
    Battery
    StrengthLow
    Battery11% to
    40%41% to
    70%Fully
    Charged
    Icon
    Displayefgd
    1flashingbar 1flashingbar,
    1 continuous bar1 flashing bar,
    2 continuous bars3 continuous bars
    Battery
    StrengthLow
    Battery31% to
    60%61% to
    90%Fully
    Charged
    1For optimal cellular signal strength, extend the antenna.
    2Press and holdpat the top of the phone until the status light glows red
    andPowering Ondisplays. 
    						
    							nextel.com
    12
    If your display readsNo Serviceor doesn’t change to the idle screen when you
    turn on your phone, and you know you are in a Nextel coverage area, contact
    Nextel Customer Care. For details on Nextel coverage areas go to nextel.com.
    To power the phone off:
    3If you have enabled your SIM PIN security feature (see “Enabling/
    Disabling the PIN Security Feature” on page 15), theEnter SIM PIN
    Codescreen displays. Enter your SIM PIN (see “Entering the SIM
    PIN” on page 17).
    PressAunder OK.
    4As your phone connects to the Nextel
    National Network, you will seeWelcome
    To N e x t e land a connecting message.
    When the idle screen appears on the
    display,youarereadytouseyouri58sr
    phone!
    1Press and holdpon the top of the phone until you see the message
    Powering Off.
    2Push down the antenna.
    O 
    						
    							13
    Enabling Over-the-Air Radio Service Software (OARSS) Security
    Enabling Over-the-Air Radio Service Software
    (OARSS) Security
    To receive Over-the-Air Radio Service Software (OARSS) programming, you
    must enable OARSS security the first time you power on your phone or within
    20 days of first activation of your phone. See“Receiving Over-the-Air Radio
    Service Software Programming (OARSS)”on page 13.
    Receiving Over-the-Air Radio Service Software
    Programming (OARSS)
    If you have been set up to receive Over-the-Air Radio Service Software
    (OARSS) programming, you will receive your Private ID and Talkgroup lists
    for Direct Connect use, your Personal Telephone Number and the Nextel
    Customer Care number via a Net Alert message.
    In order to receive your programming, you must have enabled OARSS security
    (“Enabling Over-the-Air Radio Service Software (OARSS) Security”on page
    13). Within 24 hours of enabling OARSS security, you will receive a Net Alert
    message containing your lists.
    1When you power on your phone for the
    first time, after the idle screen appears,
    you will be prompted to select OK to
    update your browser info.
    NOTE: If you pressAunder LATER,
    youwillbepromptedtoenable
    security each time you power on
    your phone until you press
    Aunder OK. It is recommended
    that you do not choose LATER.
    2PressAunder OK.
    3You are prompted to enable security. PressAunder YES.
    A series of screens display. If you subscribe to a Nextel Online
    Service
    SMplan, your home page displays.
    4Presseto return to the idle screen.
    a 
    						
    							nextel.com
    14
    To accept your phone’s programming:
    Subscriber Identity Module (SIM) Card
    Your phone comes with a built-in level of security protection through the use of
    the SIM card. The SIM card stores all your Phonebook information and your
    Nextel account identification information. Since this information is stored on
    the SIM card and not in your phone itself, you can remove the information by
    removing the SIM card.
    The SIM card is located in the SIM card holder on the back of the phone,
    underneath the battery. You can verify that the SIM card is in place by removing
    the battery and viewing the SIM card through the SIM card cover.
    See“Removing/Inserting the SIM Card”on page 25 for information on locating
    the SIM card. If there is no SIM card in your phone, notify your Nextel
    Authorized Representative.
    NOTE: Except for making emergency calls, your phone will not
    function without the SIM card.
    SIM Card Personal Identification Number (PIN)
    To prevent unauthorized use of your account, you can protect your SIM card by
    enabling the SIM PIN security feature. With the SIM PIN security feature
    enabled, you must enter your PIN each time the phone is powered on. You can
    change or disable your PIN if desired.
    1You will receive a Net Alert with the messageNew Browser Message–
    Receive Programming Info.
    2PressAunder GOTO.
    3You are prompted to accept changes to your Phonebook. PressA
    under OK.
    4A confirmation screen displays. PressAunder OK.
    5You are prompted again to accept changes to your Phonebook. Press
    Aunder OK.
    6A confirmation screen displays. PressAunder OK.
    7Presseto return to the idle screen. 
    						
    							15
    Subscriber Identity Module (SIM) Card
    NOTE: It is recommended that you enable the SIM PIN security feature
    to prevent fraudulent use of the SIM card, youri58srphone, and
    your account.
    Enabling/Disabling the PIN Security Feature
    Once the SIM PIN security feature is enabled, you are prompted to enter your
    PIN each time you turn on your phone. Until a valid PIN is entered, you can use
    the phone only to make emergency calls.
    After the SIM PIN is accepted, the phone registers on the network and the idle
    screen displays.
    When the SIM PIN security feature is disabled, the phone can be used without
    entering a PIN.
    To enable SIM PIN security
    IMPORTANT: It is recommended that you enable the
    PIN security feature to protect
    personal data on your SIM card. This
    prevents anyone from using your
    phone and accessing your personal
    data.
    1At the idle screen, pressmand then
    pressRto scroll toSettings.
    2PressAunder SELECT. TheSettingsscreen displays.
    B 
    						
    							nextel.com
    16
    Once you have enabled the SIM PIN security feature, it is recommended that
    you change your PIN to a 4- to 8-digit number known only to you (see
    “Changing the PIN”on page 17).
    3PressRto scroll toSecurity.PressA
    under SELECT to access theSecurity
    screen.
    4At theSecurityscreen, pressRto scroll toSIM PIN.PressAunder
    SELECT to access theSIM PINscreen.
    5PressRto scroll toOnorOff.Onenables the SIM PIN security
    feature;Offdisables the SIM PIN security feature. PressAunder
    SELECT.
    6At theVerify SIM PIN Codescreen, enter the current SIM PIN and
    pressAunder OK.
    NOTE: The default SIM PIN is 0000.
    C 
    						
    							17
    Subscriber Identity Module (SIM) Card
    Entering the SIM PIN
    If you enter an incorrect PIN, the messageSIM PIN incorrect: Try again
    appears on your phone’s screen. If you make three consecutive incorrect
    attempts, the SIM card is blocked. Once blocked, the phone will not allow you
    to enter your PIN again, even after powering the phone off and back on. If this
    happens, see“Unblocking the SIM PIN”on page 19.
    Changing the PIN
    NOTE: In order to change the PIN, the SIM PIN security feature must be
    set to On. See“Enabling/Disabling the PIN Security Feature”on
    pa ge 15 .IMPORTANT: Incorrectly entering your PIN three
    times causes the SIM card to be
    blocked. To unblock your SIM ca rd,
    you must contact Nextel Customer
    Care. For more information, see
    “Unblocking the SIM PIN”on page
    19.
    1From theEnter SIM PIN Codescreen,
    enter your 4- to 8-digit PIN. An asterisk
    appears for each character entered.The
    default SIM PIN is 0000.
    NOTE: Other than emergency dialing,
    you will be unable to use any of
    the phone functions, including
    receiving phone calls, until you
    enter the PIN.
    2PressAunder OK.
    P 
    						
    							nextel.com
    18
    1From the idle screen, pressmand then
    pressRto scroll toSettings.
    2PressAunder SELECT. TheSettingsscreen displays.
    3PressRto scroll toSecurity.PressA
    under SELECT to access theSecurity
    screen.
    4At theSecurityscreen, pressRto scroll toNew Passwords.PressA
    under SELECT to access theNew Passwordsscreen.
    5At theNew Passwordsscreen, pressRto scroll toSIM PINand press
    Aunder SELECT.
    6At theEnter Old SIM PIN Codescreen, enter the current SIM PIN
    and pressAunder OK.
    NOTE: The default SIM PIN is 0000.
    7At theEnter New SIM PIN Codescreen, enter a new 4- to 8-digit SIM
    PIN and pressAunder OK.
    8At theRe-enter New SIM PIN Codescreen, re-enter the new SIM PIN
    to confirm, and pressAunder OK.
    B
    C 
    						
    							19
    Subscriber Identity Module (SIM) Card
    Unblocking the SIM PIN
    If you forget your PIN and unsuccessfully enter it three times, access to your
    phone will be blocked.
    NOTE: Before you begin, obtain the PIN Unblocking Key (PUK) code
    from Nextel Customer Care, then read and understand the PIN
    unblocking sequence. When entering the key press sequence,
    each key press must occur within 5 seconds of the prior key
    press.
    To unblock the PIN:
    IMPORTANT:If you unsuccessfully enter the PUK code
    ten times, the SIM card is permanently
    blocked and must be replaced. If this
    happens, all data will be lost. You will get a
    message to contact your service provider.
    Contact Nextel Customer Care for
    assistance. If the SIM card is blocked, the
    i58srphone only allows outgoing
    emergency calls.
    1Press**05s.
    2Enter the 8-digit PUK code.
    3Presss.
    4Enter a new 4- to 8-digit SIM PIN and presss.
    5Re-enter your SIM PIN and presss.
    If you entered the codes properly, theSIM Unlockedscreen displays. 
    						
    							nextel.com
    20 Inserting/Removing the SIM Card
    IMPORTANT: If you remove your SIM card and insert it into another phone, some
    information does not display when you use the new phone with your SIM
    card. All Phonebook information remains stored on your original SIM
    card. The following information does not display:
    IMPORTANT: Do not touch the gold-colored areas of the SIM card.
    To avoid loss or damage, do not remove your SIM card from your phone
    unless absolutely necessary.
    To Remove the SIM Card
    Datebook NotificationsRecent Calls List
    Personalized SettingsInformation Stored in Memo
    Ne t Al ert Noti fica tionsPrevious three GPS Enabled Locations
    1With the phone powered off, remove the battery cover and battery. See
    “Detaching the Battery”on page 16.
    2With the antenna pointing up and
    the back of the phone exposed and
    facing up, locate the SIM cover
    andgentlypushitforward.
    3Lift the SIM cover up.
    000800137866150 
    						
    All Motorola manuals Comments (0)

    Related Manuals for Motorola I58sry User Guide