Motorola Mc3090z Owners Manual

							Chapter 2 Updating the RFID Mobile
Computer
Introduction
This chapter describes how to update the device image and radio firmware.
Updating the Device Image
Windows Mobile contains an Image Update feature that updates all operating system components. Zebra 
distributes all updates as update packages on the Support Central Web Site http://www.zebra.com/support. These 
packages contain either partial or complete updates for the operating system.
To update an operating system component, copy the update package to the mobile computer using ActiveSync or 
MSP. 
Downloading an Update Loader Package
1.Download the appropriate update loader package from the Zebra Support Central web site 
http://www.zebra.com/support to a host computer.
2.Locate the update loader package file on the host computer and un-compress the file into a separate directory:
9190w65HenULxxxxx.zip for updating via ActiveSync
Updating Images via ActiveSync
To install an update loader package using ActiveSync:
1.Insert the mobile computer into the cradle and connect the cradle to AC power. 
2.Connect the mobile computer to the host computer using ActiveSync. 
3.In ActiveSync on the host computer, open Explorer on the mobile computer.
4.Copy the contents of xxxxw65xenULxxxxxX\UpdateLoader (the files only, not the folder) into the \Storage 
Card folder on the mobile computer. For example, the name for the MC9190Z is 
9190w65HenUL024103\UpdateLoader.  
						

							2 - 2 MC919Z Integrator Guide Supplement
5.On the mobile computer, navigate to the \Storage Card folder and tap the program STARTUPDLDR.EXE. The 
update takes approximately 10 minutes. Do not remove AC power during this time.
6.Copy MCRFIDInstall_x.x.x.CAB into the \Storage Card folder on the mobile computer.
7.On the mobile computer, navigate to the \Storage Card folder and tap MCRFIDInstall_x.x.x.CAB. The device 
reboots after the installation with RFID operational. 
Updating the RFID Firmware
The RFID_FLASH utility, used to update the RFID radio firmware, is no longer provided. For related issues, contact 
Zebra support. 
						

							Chapter 3 MobileRFID Functionality
Introduction
MobileRFID is an RFID server application that runs in the background on the mobile computer. The MobileRFID 
icon appears in the system tray. This chapter includes information on using and configuring MobileRFID.
Figure 3-1MobileRFID Icon 
						

							3 - 2 MC919Z Integrator Guide Supplement
MobileRFID Icons
The MobileRFID icon indicates RFID radio status as described in Table 3-1.
Table 3-1 MobileRFID Icon Indicators
IconIndication
RFID running, radio on.
RFID running, radio off.
RFID stopped (radio not found/battery critical/stopped from user interface). 
						

							MobileRFID Functionality 3 - 3
MobileRFID Menu
If using RFID as the Windows default home screen, tap the RFID panel, then tap the Settings button.
Figure 3-2MobileRFID Home Window and Settings Window
If not using RFID as the Windows default home screen, tap the MobileRFID icon in the system tray. A menu 
appears.
Figure 3-3MobileRFID Icon Menu 
						

							3 - 4 MC919Z Integrator Guide Supplement
Configure Region
Upon Startup
After upgrading the mobile computer, the following window appears on startup.
Figure 3-4Country Not Set Window
1.Tap ok. When no country is selected, the Region Configuration window appears.
Figure 3-5Region Configuration Window 
						

							MobileRFID Functionality 3 - 5
2.Select the Region of Operation and Communication Standard as allowed by the regulatory standards of 
that country/region from the drop-down menus. The following warning message appears.
Figure 3-6Region Selection Warning Message
3.Tap Ye s to confirm. A window appears indicating success.
Figure 3-7Region Selection Success Window 
						

							3 - 6 MC919Z Integrator Guide Supplement
After Startup
If not done at startup, set the regulatory region as follows:
1.Invoke the MobileRFID menu, then tap Configure Region.
2.In the Region Configuration window, select a region from the Region of Operation drop-down menu.
Figure 3-8Region Configuration Window
3.Tap Ye s on the warning window that appears. A confirmation window appears upon successful completion.
Figure 3-9Region Selection Success Window
4.Tap OK. 
						

							MobileRFID Functionality 3 - 7
Configure RFID
RFID is in Server Mode by default. To configure RFID to operate in Client Mode:
1.Invoke the MobileRFID menu, then tap Configure RFID.
Figure 3-10RFID Configuration Window
2.Select the Client Mode check box. 
3.In the LLRP Port field, enter the port number on which the server waits for the RFID client to communicate. 
The default is 5084.
4.In the Server IP field, enter the server IP for the remote host to which RFID communicates as a client.
5.Tap Apply.
6.Tap OK to close the window. 
						

							3 - 8 MC919Z Integrator Guide Supplement
Version Information
To view software version information for the RFID application, invoke the MobileRFID menu, then tap About.
Figure 3-11About MobileRFID Window
This window displays the MobileRFID application version, radio library version, radio firmware version, and radio 
OEM data version.
NOTEThe version information in Figure 3-11 may differ from the information on the actual mobile computer 
screen.