Motorola Qip 7100 2 User Guide

  
5 CONNECTING YOUR QIP RECEIVER 
 21
 
Connecting Your QIP Receiver to a Stereo TV (SDTV) 
IR RemoteInput CableCARD
USB
Ethernet
SWITCHED105-125 V 60 Hz
4 A MAX
500 W MAX
Serial Optical
AudioDigital
Audio
S-Video
1394
Firewire
HDMI
RF TV OUT
FiOS TV IN Audio
Left
Audio Right
Video
Out Y
Pb
Pr
CABLE/
ANTENNA IN INPUT
S-VIDEO
VIDEO
L
R AUDIO
Standard-Definition TV
either / or
L/R audio
connection S-video
connection Video
connection
Coax Cable in
QIP7100
 
Depending on the TV’s inputs: 
1.  If possible,...

  
5 CONNECTING YOUR QIP RECEIVER 22
 
Connecting a Stereo TV (SDTV) 
1.  Connect the stereo audio cable to the AUDIO L and R connectors on the QIP 
receiver and the AUDIO LEFT and AUDIO RIGHT connectors on the Stereo TV 
(SDTV).  
2.  Connect a video cable to the VIDEO OUT connector on the QIP receiver and the 
INPUT VIDEO on the TV  or an S-video cable to the S-VIDEO connectors on the 
QIP receiver and the TV.  
These video connection methods do not support HD video. If you have an HDTV, see...

  
5 CONNECTING YOUR QIP RECEIVER 
 23
 
Connecting Your QIP Receiver to a Stereo TV (SDTV) and Stereo VCR 
CABLE/
ANTENNA IN INPUT
S-VIDEO
VIDEO
L
R AUDIOTo T V
CABLE/
ANTENNA IN INPUT
AUDIO
R
L VIDEO
OUTPUT
AUDIO
R
L VIDEO
Standard-Definition TV
VCR QIP7100
IR Remote
Input CableCARD
USB
Ethernet
SWITCHED105-125 V 60 Hz
4AMAX
500 W MAX
Serial Optical
AudioDigital
Audio
S-Video
1394
Firewire
HDMI
RF TV OUT
FiOS TV IN Audio
Left
Audio Right
Video
Out Y
Pb
Pr
L/R audio
connection Video
connection
Coax...

  
5 CONNECTING YOUR QIP RECEIVER 24
 
Connecting your QIP Receiver to an A/V Receiver, Stereo TV (SDTV), Stereo VCR 
IR Remote
Input CableCARD
USB
Ethernet
SWITCHED105-125 V 60 Hz
4 A MAX
500 W MAX
Serial Optical
AudioDigital
Audio
S-Video
1394
Firewire
HDMI
RF TV OUT
FiOS TV IN Audio
Left
Audio Right
Video
Out Y
Pb
Pr
CABLE/
ANTENNA IN INPUT
S-VIDEO
VIDEO
L
R AUDIOTo T V
CABLE/
ANTENNA IN INPUT
AUDIO
R
L VIDEO
OUTPUT
AUDIO
R
L VIDEO
DIGITAL AUDIO
TV/MONITOR OUTPUT SPEAKER
CONNECTORS
COAXIAL
VIDEO...

  
5 CONNECTING YOUR QIP RECEIVER 
 25
 
Connecting an A/V Receiver, TV, and VCR 
1. Connect a stereo audio cable to the AUDIO OUT L and R connectors on the QIP 
receiver and the INPUT L and R connectors on the A/V receiver. 
2.  Connect a video cable to the video out connector on the QIP receiver and the cable/TV 
video connector on the A/V receiver. 
3.  Connect a stereo audio cable to the VCR AUDIO OUT L and R connectors on the A/V 
receiver and the INPUT AUDIO L and R connectors on the stereo VCR....

  
 
27 
6 RECORDING YOUR CONNECTIONS 
Use this diagram to record connections between your home entertainment 
components. You can use this diagram to reconnect your system if you move the 
equipment or add new equipment. 
Disconnect the power from the QIP receiver before connecting or changing cable 
connections. Do not place another component or object on top of the QIP receiver. 
COAXIAL
IEEE 1394
OPTICALSPDIF
Stereo receiver
IR Remote
Input CableCARD
USB
Ethernet
SWITCHED105-125 V 60 Hz
4AMAX
500 W...

  
6 RECORDING YOUR CONNECTIONS 28
 
Data Devices 
IR RemoteInput CableCARD
USB
Ethernet
SWITCHED105-125 V 60 Hz
4AMAX
500 W MAX
Serial Optical
AudioDigital
Audio
S-Video
1394
Firewire
HDMI
RF TV OUT
FiOS TV IN Audio
Left
Audio Right
Video
Out Y
Pb
Pr
Audio/video devices
External hard
drive USB
devices
 
Do not attempt to connect data devices without contacting your service provider. 
Advanced data features require the proper application and network infrastructure 
to operate. 
Data Features 
In...

  
 
29 
7 TROUBLESHOOTING 
Before calling your service provider, review this troubleshooting guide. This 
information is to help you quickly solve a problem. If your problem still exists, 
contact your service provider. 
Problem Possible Solution 
The QIP receiver will 
not power on The QIP receiver may have received a software update and may not power on while 
the new software is being installed. Try again in a few minutes. 
•  Verify that the AC power cord is connected to the QIP receiver and an AC...

  
7 TROUBLESHOOTING 30
 
Problem Possible Solution 
There is no video on 
the TV screen •
  Verify that the TV is powered on and set to the appropriate input source for 
the QIP receiver. 
•   Verify that the QIP receiver is powered on and tuned to an authorized cable 
channel. 
•   Verify that all video cables between the QIP receiver and the TV are firmly 
connected. 
•   Verify that the coaxial cable feed is fi rmly connected to the QIP receiver and 
the wall jack. 
•   If the QIP receiver video...