Mountfield Lawn Mower SP470 299324628/BQ Operating Instructions

							Call our Helpline if you have any problems:
Helpline Number
0870 240 2114
Product Code:
299324628/BQ
Operating
Instructions
for
SP470 ES Lawnmower
with Briggs & Stratton engine
Please Read These Instructions
Before Using Your Mower 
						

							Read the
instructions
before using
the machine.
SAFETY PRECAUTIONS
Beware of
moving blades.
Do not put hands
or feet near
the blades.Disconnect the
spark plug cap
before carrying
out any repairs
or maintenance.Keep other
people at a safe
distance whilst
working. Beware of thrown
objects that may 
be thrown up by 
the blade.
Thank you for purchasing a Mountfield lawnmower. This machine will give you many years of safe and reliable service if
operated in accordance with these instructions. Please read and understand these Operating instructions before using
your mower, failure to do so could result in personal injury or damage to the equipment.
NEVER TIP THE MOWER ON ITS SIDE AS THIS WILL FLOOD THE AIR FILTER WITH OIL. 
To access the underside, lift the front wheels by lowering the handle until it rests on the ground.
Warning!
The following safety precautions must be observed at all times. Please read them very carefully.
TRAINING
1)   Read the instructions carefully. Familiarise yourself with the controls and proper use of the equipment. Learn how to stop
      the engine quickly. 
2)   Only use the lawnmower for the purpose for which it was designed, i.e. for cutting and collecting grass. Any other use can be
      hazardous, causing damage to the machine. 
3)   Never allow children or people unfamiliar with these instructions to use the lawnmower. Local regulations may restrict the
      age of the operator. 
4)   Never use the lawnmower:
      – When people, especially children, or pets are nearby.
      – If the operator has taken medicine or substances that can affect his ability to react and concentrate. 
5)   Remember that the operator or user is responsible for accidents or hazards occurring to other people or their property. 
PREPARATION
1)   While mowing, always wear sturdy footwear and long trousers. Do not operate the equipment when barefoot or wearing
      open sandals. 
2)   Thoroughly inspect the area where the equipment is to be used and remove all objects which may be thrown by the machine
      or damage the cutter assembly and the engine (stones, sticks, metal wire, bones, etc.)
3)   WARNING: DANGER! Petrol is highly flammable:
      – Store fuel in containers specifically designed for this purpose.
      – Refuel using a funnel and outdoors only. Do not smoke while refuelling or whenever handling the fuel.
      – Add fuel before starting the engine. Never remove the cap of the fuel tank or add fuel while the engine is running or when
        the engine is hot. 
      – If fuel is spilled, do not attempt to start the engine but move the machine away from the area of spillage and avoid creating
        any source of ignition until the fuel has evaporated and the vapour dispersed. 
      – Replace all fuel tanks and containers caps securely. 
4)   Replace faulty silencers. 
5)   Before use, always inspect the machine, especially the condition of the blades, and check that the screws and cutting
      assembly are not worn or damaged. Replace worn or damaged blades and screws in sets to preserve balance. 
6)   Before mowing, attach the discharge opening guards (grass-catcher or deflector flap). 
OPERATION
1)   Do not operate the engine in a confined space where dangerous carbon monoxide fumes can collect. 
2)   Mow only in daylight or good artificial light. 
3)   If possible, avoid operating the equipment in wet grass. 
4)   Always be sure of your footing on slopes. 
5)   Walk, never run and do not allow yourself to be pulled along by the lawnmower. 
6)   Mow across the face of slopes, never up and down. 
7)   Exercise extreme caution when changing direction on slopes. 
8)   Do not mow on slopes of more than 20°. 
9)   Exercise extreme caution when pulling the lawnmower towards you. 
10) Stop the blade if the lawnmower has to be tilted for transportation when crossing surfaces other than grass, and when
      transporting the lawnmower to and from the area to be mowed. 
						

							11) Never operate the lawnmower with defective guards, or without safety devices, such as the deflector flap and/or
      grass-catcher, in place. 
12) Do not change the engine governor settings or overspeed the engine. 
13) On power-driven models, disengage the drive clutch before starting the engine. 
14) Start the engine carefully, following the instructions and keeping feet well away from the blade.
15) Do not tilt the lawnmower when starting the engine. Start the engine on a flat surface that is free of obstacles and tall grass.
16) Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times. 
17) Never pick up or carry a lawnmower while the engine is running. 
18) Stop the engine and disconnect the spark plug wire:
      – Before carrying out any work underneath the cutting deck or before unclogging the chute;
      – Before checking, cleaning or working on lawnmower; 
      – After striking a foreign object. Inspect the lawnmower for damage and make repairs before restarting and operating the 
         lawnmower; 
      – If the lawnmower starts to vibrate abnormally (find and remove the cause of the vibration immediately). 
19) Stop the engine: 
      – Whenever you leave the lawnmower unattended. Remove the key from models with electric starters. 
      – Before refuelling.
      – Every time you remove or replace the grass-catcher. 
20) Reduce the throttle before turning off the engine and turn the fuel tap off (if fitted) when you have finished mowing, following
      the instructions in the engine handbook. 
21) When mowing, always keep to a safe distance from the rotating blade. This distance is the length of the handle.
MAINTENANCE AND STORAGE 
1)   Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition. Regular maintenance is essential
      for safety and performance. 
2)   Never store the equipment with fuel in the tank inside a building where vapour may reach a flame or a spark or a source of
      extreme heat. 
3)   Allow the engine to cool before storing in an enclosed space. 
4)   To reduce the fire hazard, keep the engine, exhaust silencer, battery compartment and fuel storage area free of grass, leaves,
      or excessive grease. Do not leave containers with grass cuttings in rooms. 
5)   Check the stone-guard and grass-catcher frequently for wear and deterioration. 
6)   If the fuel tank has to be drained, this should be done outdoors and when the engine is cool. 
7)   Wear strong work gloves when removing and reassembling the blade. 
8)   Check the blade’s balance after sharpening. 
9)   For reasons of safety, do not use the equipment with worn or damaged parts. Parts are to be replaced and not repaired.
      Use genuine spare parts (blades should always bear the symbol ). Parts that are not of the same quality can damage the
      equipment and be dangerous for your safety. 
10) Whenever the machine is to be handled, transported or tilted you must:
      – wear strong working gloves; 
      – grasp the machine at the points that offer a safe grip, taking account of the weight and its distribution.
EQUIPMENT IDENTIFICATION LABEL
1. Acoustic power level according to EEC directive
2000/14/CE
2. Mark of conformity according to EEC directive 98/37
3. Year of manufacture
4. Rating
5. Operational motor speed in r.p.m.
6. Lawnmower type
7. Serial number
8. Weight in kg. (if over 25 kg.)
9. Name and address of Manufacturer
11. Chassis
12. Blade
13. Engine
14. Deflector flap
15. Grass-catcher
16. Handle
17. Throttle control
18. Engine brake lever (OPC lever)
19. Drive engagement lever
DESCRIPTION OF THE SYMBOLS SHOWN ON THE CONTROLS (where present)
12345678
1.Slow2.Fast3.Choke4.Engine stop5.Transmission engaged6.7.8.
Off
On
Start 
						

							HOW TO GET MOWING
Your Mountfield lawnmower does not contain petrol or oil and these must be added before use. Running the mower with
insufficient oil can cause serious damage to the engine and will invalidate your warranty.
                    NEVER TIP THE MOWER ON ITS SIDE AS THIS WILL FLOOD THE AIR FILTER WITH OIL. 
                    To access the underside, lift the front wheels by lowering the handle until it rests on the ground.
Carefully remove the mower from the carton and read these Operating Instructions. An Owner's Manual for the
engine is also included, please read this before starting the engine.
1. FINISH ASSEMBLY
NOTE – The machine can be supplied with some of the components already fitted. 
1.1   Handle 
 Attach the bottom of the handle (1) to the holes on the side of the
        chassis. Secure it using the nuts and bolts supplied (2). Fit the top
        of the handle (3) using the nuts and bolts (4) provided, ensuring that
        the spiral (5) of the starter cable is positioned correctly. 
On some models: connect the engine brake cable (6) by attaching
        the wire terminal (7) to the hole on the control lever (8). Fasten the
        cable support (6a) to the handle using the nuts and bolts (9) as shown.
        Attach the control cables using the cable ties (10).
1.2   Assemble the dashboard (1) following the steps shown.
1.3a For a rigid grass-catcher: 
 Carefully detach the plate (1) and washers (2) from the top of the
         grass-catcher (3). Eliminate the washers (2) and fit the plate (1) onto the
         top of the grass-catcher (3) so that it clicks into place. Assemble the two
         parts of the grass-catcher (3) and (4), making sure that the hooks are fully
         locked into place and fasten them using the screws supplied (5).
1.3b For a plastic and cloth grass-catcher: 
       Carefully detach the plate (11) and washers (12) from the top of the
         grass-catcher (13). Fit the plate (11) onto the top of the grass-catcher (13)
         so that it clicks into place. With the plastic part (13) upside-down, fasten the
         frame (15) using the screws (16) and washers (12). Insert the frame (15) in
         the grass-catcher (17) and attach the plastic bars (18) using a screwdriver,
         as shown in the drawing. Fit the edge of the cloth (19) right into the groove
         of the plastic part (13), starting 5-7 mm from the ends. 
1.2
1
2
3
24
4
5
5
10
1.1
6
78
96a
4
3
2123
13
55
1.3a
12111213
1113
1.3b
181319
17
1518
1513165-7 mm
19
1218 
						

							1.4   On models with an electric starter, connect the battery cable to the
        lawnmower’s general cable connection.
2. DESCRIPTION OF CONTROLS
2.1  The blade brake is controlled by the lever (1), which should be
       held against the handle when starting and using the lawnmower.
       The engine stops when the lever is released. 
2.2 In the power-driven models, pull the lever (1) towards the
        handle for forward movement. The lawnmower stops moving
        forward when the lever is released. 
2.3The cutting height is adjusted using the levers (1).
       On some models, this adjustment is made by fitting the
       wheels into the required holes (2). The four wheels must
       be at the same height.
 MAKE THIS ADJUSTMENT ONLY WHEN THE BLADE HAS
       STOPPED MOVING.
12.2
1
1
2.3
1
2.1
1.4 
						

							3. GRASS CUTTING
3.1  Lift the stone-guard and attach the grass-catcher (1) correctly as
       shown in the drawing. 
3.2  To start the engine, follow the instructions in the engine booklet
       and then pull the blade brake lever (1) towards the handle and give 
       a sharp pull on the starter cable knob (2).
       For models with an electric starter, turn the starter key (3). 
3.3  The lawn will look better if it is always cut to the same height and
       in alternate directions. 
3.4  When you have finishing mowing, release the brake lever (1) and
       disconnect the spark plug cap (2).  Remove the starter key (3)
       (where fitted).
       WAIT FOR THE BLADE TO STOP before carrying out any type of
       work on the machine. 
1
23.3
1
3.1
1
3.4
32
2
3.2
3
1 
						

							4. ROUTINE MAINTENANCE
IMPORTANT – Regular, careful maintenance is essential for keeping the safety level and original performance of the
machine unchanged in time.
1)    Wear strong working gloves during any cleaning, maintenance or adjustment operation on the machine. 
2)    Carefully clean the machines with water after each cut; remove the grass debris and mud accumulated inside the chassis
       to avoid their drying and thus making the next start-up difficult. 
3)    The paintwork on the inside of the chassis may peel off in time due to the abrasive action of the cut grass; in this case,
       intervene promptly by touching up the paintwork using a rustproof paint to prevent the formation of rust that would lead to
       corrosion of the metal. 
4)    Should it be necessary to access the lower part, only tilt the machine from the side shown in the engine handbook; following
       the relative instructions. 
4.1  After work has been carried out on the blade, reassemble as shown
       in the drawing, tightening the central screw (1) to 50-60 Nm
       (5.0-6.0 kgm). 
4.2  In the power-driven models, regulate the adjuster (1) so that the
       wire (2) is slightly loose, with the lever (3) at rest 
4.3  To recharge a flat battery, connect to the battery charger (1)
       following the instructions in the battery maintenance handbook.
       If the machine is to remain inactive for a long period, disconnect
       the battery leads after making sure that the battery is fully charged. 
       Before initial use, or following winter storage, charge the battery for
       24 hours using the charger provided.
       To maintain the battery in good condition charge overnight once a
       month during the season or more frequently if heavily used.
       For winter storage, remove the battery and charge for 24 hours.
       Store in a dry place at a temperature of no less than 5 degrees
       Celsius.
Should you have any doubts or problems, do not hesitate to contact your nearest Service Centre or your Dealer.
1
4.3
1
4.1
12
3
4.2 
						

							GuaranteeGuarantee
This guarantee is in addition to, and does not detract from, the contractual rights of the 
owner under statute or common law. The engine manufacturer guarantees the engine fitted to this machine. This gurantee does not apply to the routine replacement of parts that are subject to normal
wear and tear - or to normal service and maintenance parts. This guarantee does not cover
faults caused by neglect or misuse. This guarantee is not transferable. Proof of purchase will be required in the event of a claim. If any part or parts is found to be defective within the guarantee period, GGP UK Limited
via their authorised dealer, will effect the repair or replacement at no charge to the owner
providing that the fault is reported direct to the dealer. All repairs must be carried out by
an authorised Mountfield dealer. Delivery and collection of the machine is the owner's 
responsibility and not covered under the terms of this guarantee.  If the machine is used for commercial purposes; i.e. for hire; or by contractors, caravan 
sites or similar users, this guarantee period shall be 90 days.  GGP UK Limited undertakes to provide a full  guarantee against defective materials or
workmanship for two years from the date of purchase.
Please keep your receipt, proof of purchase will be
required in the event of a claim. The information for your machine is on the serial
number label, which is fixed on the cutter deck at the
base of the handles. You will be asked for these
details if you have any problems or require spare parts. On delivery of your new Mountfield mower, we 
suggest that you complete the box to the right.
Service Record
Date of Service:
Next Service Due:
Dealer's Signature:
Dealer's Stamp:
1st Service
2nd Service
Part Number 71503862/0
LWA
(Year) . . . . . . . 
S/N° . . . . . . . . . . . . . . . . 
Manufactured byGGP ITALY SPAVia del Lavoro, 6 - 31033 
Castelfranco V.to (TV) - ITALY
dB
Model: . . . . . . . . . . . . . . . .
Type: . . . . . . . . . . .
96
Manufactured by:
GGP ITALY SPA- Via del Lavoro, 6 - 31033 Castelfranco V.to (TV) - ITALY
GGP UK LIMITED 
Bell Close, Newnham Industrial Estate, Plympton,  Plymouth, Devon, PL7 4JH, England
Date of Service:
Next Service Due:
Dealer's Signature:
Dealer's Stamp: