Home > MSI > Motherboard > MSI K8n Neo V2 0 Manual

MSI K8n Neo V2 0 Manual

    Download as PDF Print this page Share this page

    Have a look at the manual MSI K8n Neo V2 0 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 62 MSI manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							 
    i  
     
     
     
    FCC-B Radio Frequency Interference Statement 
    This equipment has been tested and found to comply with the limits for a class B digital device, pursuant 
    to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful 
    interference in a residential installation. This equipment generates, uses and can radiate radio frequency 
    energy and, if not installed and used in accordance with the instruction manual, may cause harmful 
    interference to radio communications. However, there is no guarantee that interference will occur in a 
    particular installation. If this equipment does cause harmful interference to radio or television reception, 
    which can be determined by turning the equipment off and on, the user is encouraged to try to correct the 
    interference by one or more of the measures listed below. 
    4 Reorient or relocate the receiving antenna. 
    4 Increase the separation between the equipment and receiver. 
    4 Connect the equipment into an outlet on a circuit different from that to which the receiver is 
    connected. 
    4 Consult the dealer or an experienced radio/ television technician for help. 
      
    Notice 1 
    The changes or modifications not expressly approved by the party responsible for compliance could void 
    the user’s authority to operate the equipment. 
    Notice 2 
    Shielded interface cables and A.C. power cord, if any, must be used in order to comply with the emission 
    limits. 
    VOIR LA NOTICE D’NSTALLATION AVANT DE RACCORDER AU RESEAU. 
     
      Micro-Star International  MS-7030   This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  
    (1) this device may not cause harmful interference, and  
    (2) this device must accept any interference received, including interference that may cause undesired 
    operation 
    G52-M7030XE  
    						
    							 
    ii  Copyright Notice 
    The material in this document is the intellectual property of MICRO-STAR INTERNATIONAL. We take 
    every care in the preparation of this document, but no guarantee is given as to the correctness of its 
    contents. Our products are under continual improvement and we reserve the right to make changes 
    without notice. 
     
    Trademarks 
    All trademarks are the properties of their respective owners. 
    AMD, Athlon™ Athlon™XP, Thoroughbred™ and Duron™ are registered trademarks of AMD Corporation. 
    Intel® and Pentium® are registered trademarks of Intel Corporation. 
    PS/2 and OS® 2 are registered trademarks of International Business Machines Corporation. 
    Microsoft® is a registered trademark of Microsoft Corporation. Windows® 98/2000/NT/XP are registered 
    trademarks of Microsoft Corporation. 
    NVIDIA, the NVIDIA logo, DualNet, and nForce are registered trademarks or trademarks of NVIDIA 
    Corporation in the United States and/or other countries. 
    Netware® is a registered trademark of Novell, Inc. 
    Award® is a registered trademark of Phoenix Technologies Ltd. 
    AMI® is a registered trademark of American Megatrends Inc.  
    Kensington and MicroSaver are registered trademarks of the Kensington Technology Group. 
    PCMCIA and CardBus are registered trademarks of the Personal Computer Memory Card International 
    Association. 
     
    Revision History 
    Revision Revision History       Date 
    V2.0  First released of v-class version for PCB 2.x     July 2005  
       with chipset nVIDIA nForce3 250      
    						
    							 
    iii  Safety Instructions 
    1. Always read the safety instructions carefully. 
    2. Keep this User Manual for future reference. 
    3. Keep this equipment away from humidity. 
    4. Lay this equipment on a reliable flat surface before setting it up. 
    5. The openings on the enclosure are for air convection hence protects the equipment from overheating.  
    Do not cover the openings. 
    6. Make sure the voltage of the power source and adjust properly 110/220V before connecting the 
    equipment to the power inlet. 
    7. Place the power cord such a way that people can not step on it. Do not place anything over the power 
    cord. 
    8. Always Unplug the Power Cord before inserting any add-on card or module. 
    9. All cautions and warnings on the equipment should be noted. 
    10. Never pour any liquid into the opening that could damage or cause electrical shock. 
    11. If any of the following situations arises, get the equipment checked by a service personnel: 
    - The power cord or plug is damaged. 
    - Liquid has penetrated into the equipment. 
    - The equipment has been exposed to moisture. 
    - The equipment does not work well or you can not get it work according to User Manual. 
    - The equipment has dropped and damaged. 
    - The equipment has obvious sign of breakage. 
    12. Do not leave this equipment in an environment unconditioned, storage temperature above 60° C 
    (140°F), it may damage the equipment. 
     
    CAUTION: Danger of explosion if battery is incorrectly replaced. Replace 
    only with the same or equivalent type recommended by the 
    manufacturer. 
     
      
    						
    							 
    iv  
     
     
    WEEE Statement  
     English 
    To protect the global environment and as an environmentalist, MSI must remind you that... 
    Under the European Union (EU) Directive on Waste Electrical and Electronic Equipment, Directive 
    2002/96/EC, which takes effect on August 13, 2005, products of electrical and electronic equipment 
    cannot be discarded as municipal waste anymore and manufacturers of covered electronic equipment will 
    be obligated to take back such products at the end of their useful life. MSI will comply with the product 
    take back requirements at the end of life of MSI-branded products that are sold into the EU. You can 
    return these products to local collection points. 
     Deutsch 
    Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt 
    Gemäß der Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte dürfen Elektro- und 
    Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden. MSI hat europaweit 
    verschiedene Sammel- und Recyclingunternehmen beauftragt, die in die Europäische Union in Verkehr 
    gebrachten Produkte, am Ende seines Lebenszyklus zurückzunehmen. Bitte entsorgen Sie dieses 
    Produkt zum gegebenen Zeitpunkt ausschliesslich an einer lokalen Altgerätesammelstelle in Ihrer Nähe. 
     Français 
    En tant qu’écologiste et afin de protéger l’environnement, MSI tient à rappeler ceci... 
    Au sujet de la directive européenne (EU) relative aux déchets des équipement électriques et 
    électroniques, directive 2002/96/EC, prenant effet le 13 août 2005, que  les produits électriques et 
    électroniques ne peuvent être déposés dans les décharges ou tout simplement mis à la poubelle. Les 
    fabricants de ces équipements seront obligés de récupérer certains produits en fin de vie. MSI prendra en 
    compte cette exigence relative au retour des produits en fin de vie au sein de la communauté européenne. 
    Par conséquent vous pouvez retourner localement ces matériels dans les points de collecte. 
     Русский 
    Компания MSI предпринимает активные действия по защите окружающей среды, поэтому 
    напоминаем вам, что....  
    В соответствии с директивой Европейского Союза (ЕС) по предотвращению загрязнения 
    окружающей среды использованным электрическим и электронным оборудованием (директива 
    WEEE 2002/96/EC), вступающей в силу 13 августа 2005 года, изделия, относящиеся к 
    электрическому и электронному оборудованию, не могут рассматриваться как бытовой мусор, 
    поэтому производители вышеперечисленного электронного оборудования обязаны принимать его 
    для переработки по окончании срока службы. MSI обязуется соблюдать требования по приему 
    продукции, проданной под маркой MSI на территории EC, в переработку по окончании срока 
    службы. Вы можете вернуть эти изделия в специализированные пункты приема.  
     Español 
    MSI como empresa comprometida con la protección del medio ambiente, recomienda: 
    Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o equipos electrónicos, con 
    fecha de rigor desde el 13 de agosto de 2005, los productos clasificados como eléctricos y equipos 
    electrónicos no pueden ser depositados en los contenedores habituales de su municipio, los fabricantes 
    de equipos electrónicos, están obligados a hacerse cargo de dichos productos al termino de su período 
    de vida. MSI estará comprometido con los términos de recogida de sus productos vendidos en la Unión 
    Europea al final de su periodo de vida. Usted debe depositar estos productos en el punto limpio 
    establecido por el ayuntamiento de su localidad o entregar a una empresa autorizada para la recogida de 
    estos residuos. 
     Nederlands 
    Om het milieu te beschermen, wil MSI u eraan herinneren dat…. 
    De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische en Electronische 
    producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan kunnen niet meer beschouwd worden als 
    vervuiling. 
    Fabrikanten van dit soort producten worden verplicht om producten retour te nemen aan het eind van hun 
    levenscyclus. MSI zal overeenkomstig de richtlijn handelen voor de producten die de merknaam MSI 
    dragen en verkocht zijn in de EU. Deze goederen kunnen geretourneerd worden op lokale 
    inzamelingspunten.  
    						
    							 
    v  
     
     
     Srpski 
    Da bi zaštitili prirodnu sredinu, i kao preduzeće koje vodi računa o okolini i prirodnoj sredini, MSI mora da 
    vas podesti da… 
    Po Direktivi Evropske unije (EU) o odbačenoj ekektronskoj i električnoj opremi, Direktiva 2002/96/EC, 
    koja stupa na snagu od 13. Avgusta 2005, proizvodi koji spadaju pod elektronsku i električnu opremu ne 
    mogu više biti odbačeni kao običan otpad i proizvođači ove opreme biće prinuđeni da uzmu natrag ove 
    proizvode na kraju njihovog uobičajenog veka trajanja. MSI će poštovati zahtev o preuzimanju ovakvih 
    proizvoda kojima je istekao vek trajanja, koji imaju MSI oznaku i koji su prodati u EU. Ove proizvode 
    možete vratiti na lokalnim mestima za prikupljanje. 
     Polski 
    Aby chronić nasze środowisko naturalne oraz jako firma dbająca o ekologię, MSI przypomina, że... 
    Zgodnie z Dyrektywą Unii Europejskiej (UE) dotyczącą odpadów produktów elektrycznych i 
    elektronicznych (Dyrektywa 2002/96/EC), która wchodzi w życie 13 sierpnia 2005, tzw. “produkty oraz 
    wyposażenie elektryczne i elektroniczne  nie mogą być traktowane jako śmieci komunalne, tak więc 
    producenci tych produktów będą zobowiązani do odbierania ich w momencie gdy produkt jest 
    wycofywany z użycia. MSI wypełni wymagania UE, przyjmując produkty (sprzedawane na terenie Unii 
    Europejskiej) wycofywane z użycia. Produkty MSI będzie można zwracać w wyznaczonych punktach 
    zbiorczych. 
     TÜRKÇE 
    Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır: 
    Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik Malzeme Atığı, 2002/96/EC Kararnamesi altında 13 
    Ağustos 2005 tarihinden itibaren geçerli olmak üzere, elektrikli ve elektronik malzemeler diğer atıklar gibi 
    çöpe atılamayacak ve bu elektonik cihazların üreticileri, cihazların kullanım süreleri bittikten sonra ürünleri 
    geri toplamakla yükümlü olacaktır. Avrupa Birliği’ne satılan MSI markalı ürünlerin kullanım süreleri 
    bittiğinde MSI ürünlerin geri alınması isteği ile işbirliği içerisinde olacaktır. Ürünlerinizi yerel toplama 
    noktalarına bırakabilirsiniz. 
     ČESKY 
    Záleží nám na ochraně životního prostředí - společnost MSI upozorňuje... 
    Podle směrnice Evropské unie (EU) o likvidaci elektrických a elektronických výrobků 2002/96/EC platné 
    od 13. srpna 2005 je zakázáno likvidovat elektrické a elektronické výrobky v běžném komunálním 
    odpadu a výrobci elektronických výrobků, na které se tato směrnice vztahuje, budou povinni odebírat 
    takové výrobky zpět po skončení jejich životnosti.  Společnost MSI splní požadavky na odebírání 
    výrobků značky MSI, prodávaných v zemích EU, po skončení jejich životnosti. Tyto výrobky můžete 
    odevzdat v místních sběrnách. 
     MAGYAR 
    Annak érdekében, hogy környezetünket megvédjük, illetve környezetvédőként fellépve az MSI 
    emlékezteti Önt, hogy ... 
    Az Európai Unió („EU) 2005. augusztus 13-án hatályba lépő, az elektromos és elektronikus 
    berendezések hulladékairól szóló 2002/96/EK irányelve szerint az elektromos és elektronikus 
    berendezések többé nem kezelhetőek lakossági hulladékként, és az ilyen elektronikus berendezések 
    gyártói kötelessé válnak az ilyen termékek visszavételére azok hasznos élettartama végén.  Az MSI 
    betartja a termékvisszavétellel kapcsolatos követelményeket az MSI márkanév alatt az EU-n belül 
    értékesített termékek esetében, azok élettartamának végén. Az ilyen termékeket a legközelebbi 
    gyűjtőhelyre viheti. 
     Italiano 
    Per proteggere l’ambiente, MSI, da sempre amica della natura, ti ricorda che…. 
    In base alla Direttiva dell’Unione Europea (EU) sullo Smaltimento dei Materiali Elettrici ed Elettronici, 
    Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti appartenenti alla categoria dei Materiali 
    Elettrici ed Elettronici non possono più essere eliminati come rifiuti municipali: i produttori di detti materiali 
    saranno obbligati a ritirare ogni prodotto alla fine del suo ciclo di vita. MSI si adeguerà a tale Direttiva 
    ritirando tutti i prodotti marchiati MSI che sono stati venduti all’interno dell’Unione Europea alla fine del 
    loro ciclo di vita. È possibile portare i prodotti nel più vicino punto di raccolta. 
     
     
      
    						
    							 
    vi   
    Table of Content 
     
    English.....................................................................1 
    Deutsch....................................................................15 
    Français...................................................................31 
    简体中文...................................................................45 
    繁體中文...................................................................59 
    日本語.......................................................................73 
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
      
    						
    							 
    1 Introduction 
    Thank you for choosing the K8N Neo V2.0 Series (MS-7030 v2.X) ATX mainboard. The K8N Neo 
    V2.0 Series is based on nVIDIA®
     nForce3 250 single chip for optimal system efficiency. Designed 
    to fit the advanced AMD®
     K8 Athlon64 processors in 754 pin package, the K8N Neo V2.0 Series 
    delivers a high performance and professional desktop platform solution. 
     Layout 
     PCI3PCI2PCI1PCI 4
    PCI 5AGP1SATA1
    SATA2BATT+
    JPW1
    C_FAN1
    IDE 1
    IDE 2
    JWR1
    S_FAN2S_FAN1
    FDD 1
    BIOS
    JUSB2 JUSB1 JFP1JFP2
    NB_FAN1
    JAUD1JCOM1JIR1
    JCD1
    JBAT1
    DDR 1
    DDR 2
    JCASE1WinbondW83627THF
    LANChip
    T:
    M:
    B:Line-In
    Line-Out
    MicT:  LAN jack
    B: USB portsTop : mouse 
    Bottom: keyboard
     USB portsTop : 
    Parallel Port
    Bottom: 
    COM port
    JCD1nVIDIAnFORCE3 250  
    						
    							 
    2 Specifications 
    CPU 
    l Supports 64-bit AMD®
     K8 Athlon64 processor (Socket 754)  
    l Supports up to 3400+ CPU 
    (For the latest information about CPU, please visit 
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support.php ) 
    Chipset 
    l nVIDIA nForce3 250  
    - Supports K8 Athlon64 processor Socket 754. 
    - HyperTransport supports speed up to 800 MHz. 
    - Supports single memory channel, DDR 400/333/266 without ECC support. 
    - Supports external AGP 4X/8X. 
    - Integrated Serial ATA interface:  SATA RAID controller and 2 channels ATA 133/100/66 
    master mode IDE controller. 
    Main Memory 
    l Supports 2 slots for 184-pin DDR DIMM modules.  
    l Supports memory size up to 2GB without ECC. 
    l Supports DDR 400/333/266. 
    (For the updated supporting memory modules, please visit 
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_trp_list.php ) 
    Slots 
    l One AGP (Accelerated Graphics Port) 1.5v 4X/8X slot 
    l Five 32-bit PCI bus slots (support 3.3v/5v PCI bus interface). 
    On-Board IDE 
    l An IDE controller on the nVIDIA nForce3 250 chipset provides IDE HDD/CD-ROM with PIO, 
    Bus Master and Ultra DMA133/100/66 operation modes 
    l Can connect up to 4 IDE devices 
    l Integrated SATA  
    - Up to 150MB/s transfer rate 
    - supporting up to 2 ports  
    On-Board Peripherals 
    l On-Board Peripherals include: 
    - 1 floppy port supports 1 FDD with 360K, 720K, 1.2M, 1.44M and 2.88Mbytes 
    - 2 serial ports (Rear *1/ Front *1)  
    						
    							 
    3  - 1 parallel port supports SPP/EPP/ECP mode  
    - 3 audio jcaks 
    - 8 USB ports (Rear * 4/ Front * 4) 
    - 1 RJ-45 LAN Jack 
    - 1 IrDA pinheader 
    Audio 
    l 6 channels software audio codec Realtek ALC655. 
    - Compliance with AC97 v2.3 Spec. 
    - Meet PC2001 audio performance requirement. 
    LAN 
    l Realtek®
     8100C (default) or 8110SB (Optional) 
    - Supports 10Mb/s and 100Mb/s, and 8110SB also supports 1000Mb/s. 
    - Compliant with PCI v2.2. 
    - Supports ACPI Power Management. 
    BIOS 
    l The mainboard BIOS provides “Plug & Play” BIOS which detects the peripheral devices and 
    expansion cards of the board automatically. 
    l The mainboard provides a Desktop Management Interface (DMI) function that records your 
    mainboard specifications. 
    NV RAID (Software) 
    l Supports 2 SATA 150 plus 4 ATA 133 
    - RAID 0, or 1, o+1, JBOD is supported 
    - Booting from RAID 
    - Cross controller RAID support 
    - Rebuilding on the Fly 
    - Spare Disk Allocation 
    l Supports Windows 2000 and later versions 
    Dimension 
    l ATX Form Factor: 220mm x 305mm. 
    Mounting 
    l 6 mounting holes.   
    						
    							 
    4 Rear Panel 
    The back panel provides the following connectors: 
     Hardware Setup 
    This chapter tells you how to install the CPU, memory modules, and expansion cards, as well as 
    how to setup the jumpers on the mainboard. It also provides the instructions on connecting the 
    peripheral devices, such as the mouse, keyboard, etc. While doing the installation, be careful in 
    holding the components and follow the installation procedures. 
     Central Processing Unit: CPU 
    The mainboard supports AMD®
     Athlon64 processor. The mainboard uses a CPU socket called 
    Socket-754 for easy CPU installation. When you are installing the CPU, make sure the CPU has 
    a heat sink and a cooling fan attached on the top to prevent overheating. If you do not have the 
    heat sink and cooling fan, contact your dealer to purchase and install them before turning on the 
    computer.  
    (For the latest information about CPU, please visit 
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support.php ) 
     Example of CPU Core Speed Derivation Procedure 
      If    CPU Clock  = 200MHz 
      Core/Bus ratio = 12 
      then  CPU core speed = Host Clock x Core/Bus ratio 
         = 200MHz  x  12 
         = 2.4  GHz KeyboardMouseParallel Port
    USB Ports
    USB PortsLANLine lnLine OutMic lnCOM Port 
    						
    All MSI manuals Comments (0)

    Related Manuals for MSI K8n Neo V2 0 Manual