MSI Km4mv Manual

2-21 Hardware Setup
Connected to JSP1
SPDIF Bracket (optional)
Front Panel Audio Connector: JAUD1
The JAUD1 front panel audio connector allows you to connect to the front panel
audio and is compliant with Intel® Front Panel I/O Connectivity Design Guide.
JAUD1
1       2
10
     9
MSI Reminds You...
If you don’t want to connect to the front audio header, pins
5 & 6, 9 & 10 have to be jumpered in order to have signal
output directed to the rear audio ports. Otherwise, the
Line-Out connector on the back...

2-22
 MS-6734 M-ATX Mainboard
CPU Frequency Jumpers: SW1 & SW2
These two jumpers provide 100MHz, 133MHz, 166MHz, and 200MHz  Front Side Bus
frequency selection for overclocking purpose.
SW1 & SW2
1 3
The motherboard provides the following jumpers for you to set the computer’s function.
This section will explain how to change your motherboard’s function through the use
of jumpers.
Clear CMOS Jumper: JBAT1
There is a CMOS RAM on board that has a power supply from external battery to
keep the data of system...

2-23 Hardware Setup
Slots
AGP (Accelerated Graphics Port) Slot
The AGP slot allows you to insert the AGP graphics card.  AGP is an interface
specification designed for the throughput demands of 3D graphics.  It introduces a
66MHz, 32-bit channel for the graphics controller to directly access main memory.
The mainboard supports 4x/8x 1.5V AGP card. The motherboard provides one AGP slot and three 32-bit PCI bus slots.
AGP Slot
PCI Slots
PCI (Peripheral Component Interconnect) Slots
The PCI slots allow you...

3-1 BIOS Setup
Chapter 3. BIOS Setup
This chapter provides information on the BIOS Setup program and allows
you to configure  the system for optimum use.
You may need to run the Setup program when:
” An error message appears on the screen during the system booting
up, and requests you to run SETUP.
” You want to change the default settings for customized features.
BIOS Setup
MSI Reminds You...
1. The items under each BIOS category described in this chapter are
under continuous update for better system...

3-2
 MS-6734 M-ATX Mainboard
Entering Setup
Power on the computer and the system will start POST (Power On Self Test) process.
When the message below appears on the screen, press  key to enter Setup.
Press DEL to enter SETUP
If the message disappears before you respond and you still wish to enter Setup,
restart the system by turning it OFF and On or pressing the RESET button. You may
also restart the system by simultaneously pressing , , and  keys.
Control Keys
Getting Help
After entering the Setup menu,...

3-3 BIOS Setup
The Main Menu
Standard CMOS Features
Use this menu for basic system configurations, such as time, date etc.
Advanced BIOS Features
Use this menu to setup the items of special enhanced features.
Advanced Chipset Features
Use this menu to change the values in the chipset registers and optimize your system’s
performance.
Integrated Peripherals
Use this menu to specify your settings for integrated peripherals.
Power Management Setup
Use this menu to specify your settings for power management....

3-4
 MS-6734 M-ATX Mainboard
Frequency/Voltage Control
Use this menu to specify your settings for frequency/voltage control.
Load Fail-Safe Defaults
Use this menu to load the BIOS values for the best system performance, but the
system stability may be affected.
Load Optimized Defaults
Use this menu to load factory default settings into the BIOS for stable system perfor-
mance operations.
Set Supervisor Password
Use this menu to set Supervisor Password.
Set User Password
Use this menu to set User...

3-5 BIOS Setup
Standard CMOS Features
Date
This allows you to set the system to the date that you want (usually the current date).
 The format is   .
dayDay of the week, from Sun to Sat, determined by
BIOS.  Read-only.
monthThe month from Jan. through Dec.
dateThe date from 1 to 31 can be keyed by numeric
function keys.
yearThe year can be adjusted by users.
Time
This allows you to set the system time that you want (usually the current time).  The
time format is   .
IDE Primary/Secondary Master/Slave...

3-6
 MS-6734 M-ATX Mainboard
If you select Manual, related information is asked to be entered to the following items.
Enter the information directly from the keyboard.  This information should be provided
in the documentation from your hard disk vendor or the system manufacturer.
Access ModeThe settings are CHS, LBA, Large, Auto.
CapacityThe formatted size of the storage device.
CylinderNumber of cylinders.
HeadNumber of heads.
PrecompWrite precompensation.
Landing ZoneCylinder location of the landing...

3-7 BIOS Setup
Advanced BIOS Features
Quick Boot
Setting the item to Enabled allows the system to boot within 5 seconds since it will
skip some check items.  Available options: Enabled, Disabled.
Anti-Virus Protection
The item is to set the Virus Warning feature for IDE Hard Disk boot sector protection.
If the function is enabled and any attempt to write data into this area is made, BIOS
will display a warning message on screen and beep. Settings: Disabled and Enabled.
Boot Sequence
Press  to enter the...