MSI Router RG60G User Manual

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  15   
4.3.1.4 PPP over Ethernet 
1.  
PPPoE Account and Password:  the account and password your ISP assigned to you. 
 For security, this field appears blank. If you dont want to change the password, leave it empty. 
2.   PPPoE Service Name :  optional. Input the service name if your ISP requires it. Otherwise, leave this 
field blank. 
3.   Maximum Idle Time:  the amount of time of inactivity before disconnecting your PPPoE...

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  16   
6. 
Connection Control:  There are 3 modes to select: 
Connect-on-demand:  The device will link up with ISP when the clients send outgoing packets. 
Auto-Reconnect (Always-on):  The device will link up with ISP until the connection is established. 
Manually:  The device will not make the link until someone clicks the connect-button in the status-page.
    
 
4.3.1.6 L2TP 
First check your ISP assigned and Select Static IP...

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  17   
4.   
Connection ID:  optional. Input the connection ID if your ISP requires it.  
5.    Maximum Idle Time:  the time of no activity to disconnect your PPTP session. Set it to zero or enable 
Auto-reconnect to disable this feature. If Auto-reconnect is enabled, this product will connect to ISP 
automatically, after system is restarted or connection is dropped. 
6.  Connection Control : There are 3 modes to select:...

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  18   
4.3.2 Wireless Setting and 802.1X setting 
 
 
＊  Wireless settings 
Wireless settings allow you to set the wireless configuration items. 
1.  Network ID (SSID):  Network ID is used for identifying the Wireless LAN (WLAN). Client stations can 
roam freely over this product and other Access Points that have the same Network ID. (The factory 
setting is  “MSI ”) 
2.  Channel:  The radio channel number. The permissible...

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  19   
＊
 802.1X Setting 
802.1X  
Check Box was used to switch the function of the 802.1X. When the 802.1X function is enabled, the 
Wireless user must  authenticate to this router first to use the Network service.  
1. RADIUS Server  
IP address or the 802.1X server ’s domain-name.  
2. RADIUS Shared Key  
Key value shared by the RADIUS server and this router. This key value is consistent with the key value in 
the RADIUS...

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  20  WPA-PSK
 
1. Select Preshare Key Mode 
  If you select  HEX, you have to fill in 64 hexadecimal (0, 1, 2 …8, 9, A, B …F) digits 
If  ASCII  is selected, the length of preshare key is from  8 to 63. 
2. Fill in the key, Ex 12345678   
 
WPA 
Check Box was used to switch the function of the WPA. When the WPA function is enabled, the Wireless 
user must  authenticate  to this router first to use the Network service.  
RADIUS...

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  21   
 
 
WPA2-PSK (AES)  
1. Select Pre-share Key Mode 
If you select  HEX, you have to fill in 64 hexadecimal (0, 1, 2 …8, 9, A, B …F) digits 
If  ASCII  is selected, the length of Pre-share key is from  8 to 63. 
2. Fill in the key, Ex 12345678 
    

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  22    
 
WPA2 (AES) 
Check Box was used to switch the function of the WPA. When the WPA function is enabled, the Wireless 
user must  authenticate  to this router first to use the Network service. RADIUS Server 
IP address or the 802.1X server ’s domain-name.  
Select RADIUS Shared Key 
If you select  HEX, you have to fill in 64 hexadecimal (0, 1, 2 …8, 9, A, B …F) digits 
If  ASCI I is selected, the length of Pre-share key is...

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  23   
 
 
WPA1/WPA2 
Check Box was used to switch the function of the WPA. When the WPA function is enabled, the Wireless 
user must  authenticate  to this router first to use the Network service. RADIUS Server 
The router will detect automatically which Security type (WPA1 or WPA2) the client is used to encrypt. 
IP address or the 802.1X server ’s domain-name.  
Select RADIUS Shared Key 
If you select  HEX, you have to fill in...

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  24   
 
 
4.3.3 WDS  
The Wireless Distribution System (WDS) supports peer-to-peer AP communication. Select  Enable to allow 
Bridge (WDS) mode between routers or  Disable to block communication between routers. 
To enable  WDS, set the  Wireless Bridging (WDS)  function to enable. Enter the Wireless MAC address of 
the router to communicate with in the form of two characters separated by a colon and click  Save.