Home > Multi-Tech Systems > Communications System > Multi-Tech Systems 4 Channel Voice/fax Part: 82087900 Update Information Manual

Multi-Tech Systems 4 Channel Voice/fax Part: 82087900 Update Information Manual

Add to Favourites
    Download as PDF

    View the Multi-Tech Systems 4 Channel Voice/fax Part: 82087900 Update Information Manual for free. All the Multi-Tech Systems manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1            ! Introduction This product update provides the information necessary to perform a 4-channel voice/fax field upgrade to your MultiVOIP. For example, a MultiVOIP MVP400 can be upgraded to an MVP800 by following the installation instructions provided below. Installation To install the 4-Channel Voice/Fax upgrade kit: 1. Check the contents of your upgrade kit to insure that it contains the parts listed below: • 4-Channel Voice/Fax...
    Page 2  6. Connect the ribbon cable from the existing 4-channel board to the 50-pin connector on the 4-Channel Voice/Fax logic board. 7. Place the 4-Channel Voice/Fax logic board in the CHANNEL 5 through 8 slots in the back panel of the unit and onto the six metal standoffs (Refer to Figure 3). 8. Secure the 4-Channel Voice/Fax logic board to the metal standoffs using the 6 screws provided in the kit.            #&...
    Start reading Multi-Tech Systems 4 Channel Voice/fax Part: 82087900 Update Information Manual

    Related Manuals for Multi-Tech Systems 4 Channel Voice/fax Part: 82087900 Update Information Manual

    All Multi-Tech Systems manuals