Home > Multi-Tech Systems > Communications System > Multi-Tech Systems Multivoip Software Version 3.01c For Mvp400/800 Product: 82088220 Update Information Manual

Multi-Tech Systems Multivoip Software Version 3.01c For Mvp400/800 Product: 82088220 Update Information Manual

Add to Favourites
    Download as PDF

    View the Multi-Tech Systems Multivoip Software Version 3.01c For Mvp400/800 Product: 82088220 Update Information Manual for free. All the Multi-Tech Systems manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1                   !!! #$  % &&    Multi-Tech Systems makes every effort to provide the latest updates to its customers. This Product Update details the changes to the Channel Setup procedure provided in the MVP400/MVP800 Quick Start Guide (PN 82088200) and the User Guide (PN 88310600). Specifically, this Product Update details the changes to the Voice/Fax tab and the addition of the Billing/Security tab in...
    Page 2           If you changed the voice coder, ensure that the same voice coder is used on the voice/fax channel you are calling; otherwise, you will always get a busy signal. 17. If you selected the FXO interface and are using touchtone dialing, you can set up the DTMF gain (or output level in decibels - dB) for the higher and lower frequency groups of the DTMF tone pair. Make your selections in the drop-down lists in the DTMF Gain group. Note: Only change...
    Page 3      !(   ) *  $   Note that step 1 through 7 and steps 15 through 23 have not changed. 8. The Voice/Fax tab displays the parameters for the voice coder, faxing, DTMF (Dual Tone Multi- Frequency) gain, and miscellaneous options such as Silence Compression, Echo Cancellation, and Forward Error Correction. 9. To change the voice coder, first select the channel by clicking the Select Channel down arrow and highlighting the channel number, then click the Voice...
    Page 4           The Billing/Security tab displays the parameters for billing options, call authentication, and automatic disconnection. 12. You can set up billing options for inbound and/or outbound calls by checking them in the Billing Options group and then entering the charge in cents per number of seconds. 13. Password protection can be enabled for outbound and/or inbound calls on the selected voice/fax channel. If you enable Call Authentication on inbound...
    Start reading Multi-Tech Systems Multivoip Software Version 3.01c For Mvp400/800 Product: 82088220 Update Information Manual

    Related Manuals for Multi-Tech Systems Multivoip Software Version 3.01c For Mvp400/800 Product: 82088220 Update Information Manual

    All Multi-Tech Systems manuals