Namco Aqua Jet Operators Manual

Operators Manual
IT IS THE RESPONSIBILITY OF THE OPERATOR TO MAINTAIN CUSTOMER SAFETY
AT
 ALL TIMES, AND IT IS IMPERATIVE THAT THE DETAILS SET OUT IN THIS
MANUAL
 ARE FOLLOWED PRECISELY.
Part No. 90500092 

© 1996 NAMCO LIMITED  all rights reserved.
No part of this publication may be reproduced by any mechanical, photogr\
aphic or electronic 
process, or in the form of phonographic recording, nor may it be stored \
in a retrieval system,
transmitted or otherwise copied for public or private use, without permi\
ssion from NAMCO EUROPE LIMITED.
While the information contained in this manual is given in good faith an\
d was accurate at
the time of printing, NAMCO EUROPE LIMITED reserve the right to make cha\...

SAFETY WARNING
In order to use this machine safely, be sure to read this Operators Manual carefully before
installation, adjustment or use of this machine.
Whenever the owner of this machine entrusts dis-assembly, installation, adjustment or routine
maintenance to another person, the owner should ensure that that person read the appropriate
precautions and relevant sections of this manual before starting work.
In order that no accidents occur when the machine is in operation, 
strictly follow the notes...

General Safety Considerations
WARNING • Only operate this machine after checking that has been
installed correctly and in accordance with the manual.
• Parts of this machine move during game play, so there are
places where the distance between the stationary section and
moveable section changes. There are warning notices to keep
hands and feet clear of moving parts, however if the operator
feels that a person is in any danger, he should warn that
person accordingly.
• The warning notices must always be...

Page PB
1. SPECIFICATIONS
POWER SUPPLY:-230volts AC
AMBIENT OPERATING
TEMPERATURE:-+5°C  to +35°C
MONITOR:-Pioneer 50” Projector Monitor
(SD-V5070NE/MYVZ)
COIN ACCEPTOR:-Mars CashFlow - 1 Channel
DIMENSIONS:-
Assembled 1265(w) x 2850(d) x 2270(h)
Front Assembly 1150(w) x 720(d) x 2070(h)
Ride Assembly 1150(w) x 2130(d) x 1320(h)
Header Assembly 1150(w) x 560(d) x 200(h)
Coin Tower 219(w) x 245(d) x 715(h)
WEIGHT:-
Assembled 534kg
Front Assembly 235kg
Ride Assembly 250kg
Header Assembly 25kg
Coin Tower...

Page 9
2. HOW TO PLAY
This is a racing game for one player. The player can select from two courses, of
different difficulty level, and to race for position against the computer.
• The objective of the game is to cover the selected course as fast as possible
within the specified time.
• If the finish line is reached within the specified time, the player’s position, time
and jump distance (*) is displayed and the game is over.
* There are three continuous jumping platforms during the course where the...

Page PB
3. MAJOR COMPONENTS 

Page 11
4. Moving the Machine
WARNING • When moving or carrying the game, make sure to dis-assemble the game into four parts: header 
assembly, Front assembly, ride assembly and coin
tower.
• The game is fitted with castors to make it easier to move. Take care when moving the machine on an
inclined surface.
• The game is still heavy even when separated in to four parts, ensure that there is an adequate
number of people to move the game.
• The Header Assembly has a forward centre of gravity, so it is...

Page PB
5. INSTALLATION
Notes on Installation
WARNING NEVER turn the power to the machine ON until installation
has been completed.
WARNING in order to prevent possible electric shocks, be sure that the
machine is connected to the mains supply with a securely
connected earthed plug.
WARNING So that customers are not injured by the movement of the
Aqua-Jet, ensure that there is at least 500mm separation
between other machines or walls.
CAUTION In order to avoid damage to the machine due to mis-operation,...

Page 13
WARNING
This machine is designed for indoor use only.
Do not install the machine in the following places.