Namco Bongo Monkey Operators Manual

							Operators Manual
BONGO MONKEY
™ 
						

							1. SPECIFICATIONS
POWER SUPPLY :-220/240volts AC
TICKET DISPENSER :-Coin Controls type C2000
DIMENSIONS :-1205(w) x 895(d) x 1900(h)
WEIGHT :-160kg.
ACCESSORIES :-Keys: (Cash Door)......................................... 2
(Coin Assy)......................................... 2
(Dispenser Door)................................ 2
(Back Door)......................................... 2ea
Operators Manual.................................................. 1
IEC mains Lead..................................................... 1
Page 1 
						

							Page
2. PRECAUTIONS
2-1 Cautions When Installing.This game is designed for indoor use only. The game must not be installed outdoors or 
under the following conditions:- 
a. In areas directly exposed to sunlight, high humidity, direct water contact, dust, high heat or extreme cold.
b. In locations that would present an obstacle in the case of an emergency, ie. near fire equipment or emergency exits.
c. On an unstable surface or subject to floor vibration.
2-2 Caution when Handling. a. AC power must always be turned OFF, and the game disconnected, before replacing any parts or connecting/disconnecting connectors.
b. When unpluggung the game from an ellectrical outlet, always grasp the pl\
ug, not the mains lead.
c. The machine must be earthed with a securely connected earthed plug.
d. Care must be taken at all times to avoid electric shock when insopecting\
 or adjusting the game.
2-3 When Transporting. a. Do not subject the game to physical shock when transporting or moving it\
.
b. Always return the levellers to the UP position before moving the machine\
.
c. Take care not to rope any moulded (plastic) parts when transporting.
2 
						

							Page
3. MAJOR COMPONENTS
Coconut assy
Credit
Display
Cash Box
Speakers Bongo Assy
Monkey
Assy
Score
Displays
Ticket
DispenserCoin Assy
Mains InMonkey
Drive
Assy
PCB Assy Power
Supply
3 
						

							Page
4. HOW TO PLAY.
• Insert coins to establish credit then press the credit dispense button o\
nce to start thegame.
• Use the mallet to hit the bongo drum, in front of the monkey that moves,\
 to stop the monkey climbing the tree. Hitting the bongo once will stop the monke\
y 
climbing, hitting the bongo repeatedly will cause the monkey to fall par\
t of the way
back down the tree.
• If a monkey reaches the coconut at the top of the tree the game is over. 
• If you are able to stop the monkeys reaching the coconuts in the given t\
ime a period of extended play will be given.
5. ADJUSTMENTS
Volume, number of tickets dispensed, game difficulty and test are adjusted on the 
Main PCB Assy.
Main 
Volume
Option
Switches BGM
Volume
Board
Reset
Button
4 
						

							Page
5-
1 Price of Play
The price of play is adjusted with the switches on the Credit Dispense B\
oard.
 
 
 
\
 
\
 
 
 
 
 
\
 
\
\
\
\
\
\
 
\
\
\
\
\
SWITCH BANK 1 (8 way)
100p BONUSSTANDARD PRICE OF PLAY
SW8SW7SW6Bonus CreditsSW5SW4SW3SW2SW1Price per Credit
0000000005p
00110000110p
01020001015p
01130001120p
10040010025p
10150010130p
11060011035p
11170011140p
0100045p
0100150p
0101055p
0101160p
0110065p
0110170p
0111075p
0111180p
1000085p
1000190p
1001095p
10011100p
10100105p
10101110p
10110115p
10111120p
11000125p
11001130p
11010135p
11011140p
11100145p
11101150p
11110155p
11111160p
0 = OFF    1 = ON1 Credit 50p  3 Credits 100p
\
 
\
\
 
\
\
 
\
 
\
 
\
\
 
\
 
 
\
 
\
\
\
\
\
\
 
\
\
\
\
\
SWITCH BANK 2  (6way)
CREDIT PULSE SPEEDCOIN SET50p BONUS
SW6SW5Pulse LengthSW4SW3Coin RatioSW2SW1Bonus Credits
0070ms0010/20/50/10000
01100ms015/10/25/100011
10130ms101/4/10/20102
11160ms111/5/10/20113
0 = OFF    1 = ON1 Credit 50p  3 Credits 100p
5 
						

							Page
5-
2 Option Switches
6
FUNCTIONDESCRIPTIONSW1SW2SW3SW4SW5SW6SW7SW8
GAME
DIFFICULTYEASY0
HARD1
ATTRACT MODEOFFO
ON1
TEST
MODETEST OFF0
TEST ON1
TICKET ON CREDIT1 TICKET1
NO TICKET0
TICKET
PAYOUT SCORE
LEVELS
2 TICKETS AT 25 POINTS0000
2 TICKETS AT 30 POINTS1000
3 TICKETS AT 35 POINTS0100
3 TICKETS AT 40 POINTS1100
4 TICKETS AT 50 POINTS0010
4 TICKETS AT 55 POINTS1010
6 TICKETS AT 65 POINTS0110
6 TICKETS AT 70 POINTS1110
7 TICKETS AT 80 POINTS0001
7 TICKETS AT 85 POINTS1001
8 TICKETS AT 85 POINTS0101
8 TICKETS AT 90 POINTS1101
9 TICKETS AT 90 POINTS0011
10 TICKETS AT 90 POINTS1011
NO SETTING0111
NO SETTING1111
5-3 Volume Adjust
The volume is adjusted on the Main PCB Board. Adjust the BGM volume cont\
rol to set 
the balance between background music and voice, then adjust Main volume \
for desired
overall volume.
5-4 Test Mode Each time the machine is switched on it will automatically carry out a r\
outine to
check the operation of the up/down motors and the opto sensors for each \
monkey.
If a motor error is detected the score display will show Er and the hi\
gh score
display will show the number of the faulty assembly e.g 1. If an opto \
error is
detected the score display will show Er, and the high score display wi\
ll show the
number of the faulty assembly e.g. o1. The assemblies are counted from\
 left to
right when viewed from the front of the machine.
The test mode is entered with DIP switch 3 on the PCB, see above. 
a. Turn the machine off, and switch DIP switch 3 On, then turn the machine back on.
b. The score display shows test number. Hitting bong 5 will advance to the next test.
c. When testing has been completed turn the machine off and reset DIP switch 3 OFF 
						

							Page7
Test 1
All score/high score display segments are flashing.
Test 2 All controlled lamps will be illuminated.
Test 3 The monkey lift motors will travel to the top and then to the bottom in 
sequence.
Test 4 All the monkey swing motors will operate.
Test 5 Each time bongo five is operated the next sound will be activated. Opera\
te
bongo four to advance to the next test.
Test 6 The ticket dispenser will dispense five tickets.
Test 7 A sound will be produced each time a bongo is pressed or released to tes\
t the
bongo switches.
Turn the machine off, reset DIP switch 3 to OFF, to return to normal game mode
5-5 Bongo Switch Adjust 1. Remove 4 x M4 Screws, retaining the bongo drum body to the front panel, \
and lift off the drum body.
2. Lift off the drum head. 
3. Alter the height of the microswitch by adjusting the microswitch retaini\
ng nuts.
5-6 Ticket Refill Open the ticket dispenser door to gain access to ticket holder. 
						

							Page
6. PARTS
CABINET
DESCRIPTIONPART No
Fluorescent Lamp Diffuser45000003
Fluorescent Tube 3364500024
Top Flash Perspex30000013
Front Perspex39000016
Coconut Lamp Cover45000004
Coconut Lamp 12v 3w Wedge64000034
Play Panel Perspex33000008
Speaker Grille45000009
Loudspeaker 4 1/2 20 watt62000006
Credit Dispense Board81000111
Credit Dispense Display Board81000112
Side Decal L & R40000014
Ticket Dispenser C200067000007
Credit Dispence Button -MPB green60200233
Panel Mount Meter65000002
Service Button60000059
Back Drop Display Decal40000017
Schaffner Mains Filter Assy66000016
5A 20mm Quick-Blo Fuse63500601
Soft Mallet88700016
8 
						

							Page
DRUM ASSY
DESCRIPTIONPART No
Bongo Top Vac-Form45000020
Black Sponge - 80 x 80 x 2045000021
Black Sponge - Round45000022
Black Sponge - 50 x 30 x 2545000024
Rubber Washer M845000025
Coil Spring45000028
Micro Switch45000030
MONKEY DRIVE & SWING MOTOR ASSY
DESCRIPTIONPART No
Coconut Micro Switch - Lever Type60000078
Circlip - 6mm45000037
Black Sponge - 50 x 30 x 2545000038
Circlip - 8mm E type45000042
Circlip - 5mm45000045
Grub Screw - M4 x 526300285
Swing Motor and Gearbox45000049
Monkey Fixing Spring Clip45000054
Spiral Shaft Bearing45000075
Black Sponge - 40 x 40 x 4045000056
Motor Limit Microswitch - Lever Type60000079
Opto Sensor88300893
Grub Screw - M5 x 526300559
Timing Belt45000071
Timing Pulley45000070
Drive Motor and Gearbox45000072
Spiral Shaft45000066
9