Namco Cyber Cycles Operators Manual

Part No. 90500038
CYBER CYCLES
Operators Manual
IT IS THE RESPONSIBILITY OF THE OPERATOR TO MAINTAIN CUSTOMER SAFETY AT
ALL
 TIMES, AND IT IS IMPERATIVE THAT THE DETAILS SET OUT IN THIS MANUAL
ARE
 FOLLOWED PRECISELY. 

SAFETY WARNING
In Order to Use This Machine Safely
In order to use this machine safely, be sure to read this Operators Manual carefully
before installation and use of the machine. Whenever the owner of this machine entrusts disassembly, installation, adjustment,
routine maintenance or trouble shooting to another person, the owner sho\
uld ensure 
that they read the appropriate precautions and relevant sections of this\
 manual before
starting work. In order that no accidents occur when the machine is in...

Page 4
1. SPECIFICATIONS
POWER SUPPLY :-220/240volts AC
 MONITOR :-Hantarex 28 Polo with Auto Degauss
COIN ACCEPTORMars CashFlow - 4 Channel
DIMENSIONS :-
Assembled 1700(w) x 1970(d) x 2100(h)
Monitor Cabinet 800(w) x 750(d) x 1530(h) ea.
Tower 500(w) x 710(d) x 1800(h)
Bike Assy 910(w) x 1370(d) x 930(h) ea.
Header 1450(w) x 240(d) x 500(h)
WEIGHT :-
Assembled 425kg
Monitor Cabinet 95kg ea.
Tower 80kg
Bike Assy 65kg ea.
Header25kg
ACCESSORIES :-Keys: (Cash Door) ..................... 2
(Coin Door)...

Page 5
2. MAJOR COMPONENTS 

Page 6
3. PRECAUTIONS
Be sure to read this section carefully.
3-1 Notes on Operation
NOTE:Only operate this machine after checking that it has been installed corr\
ectly 
and in accordance with the manual.
NOTE:Parts of this machine move during game play, so there are places where the 
distance between the stationary section and moveable section changes.
There is a warning sticker that the player must be able to reach the gre\
y
matting of the bike base with their feet, however if the operator feels \...

Page 7
3-3 Cautions When Installing.
1. This machine is designed for indoor use onl y. 
Do No t install the machine in the
following places
2. If this machine is installed next to walls or other machines, ensure tha\
t there is plenty of space between them. 

Page 8
NOTE:So that customers are not injured by the movement of the bikes, ensure that
the machines are separated from each other by 200mm and from walls or
other machines by at least 300mm either side, and 600mm from the rear of
the bikes.
NOTE:In order to gain access to the mains-in connector, ON/OFF switch and link
switches, make sure that the rear of the machine is separated from a wall or
other machine by a distance of at least 500mm or more. 

Page 9
3-4 Cautions when Handling.
DANGERThe Mains Voltage to this machine must be within the range of
220v to 240v AC.
DANGERBe sure that the power is turned  OFF when replacing parts and
connecting/disconnecting connectors.
DANGERTo prevent possible electric shocks due to failure, this machine  MUST
be fitted with a securely connected earthed plug.
DANGERThe monitor and power supply contain areas of very high voltage. Be
extremely careful when inspecting or making adjustments.
DANGERWhen unplugging the...

Page 10
4. INSTALLATION
Note:- The monitor cabinets and tower are supplied already assembled.
The following instructions are for information only.
4-1 Assembling the Monitor and Tower Assemblies
1. Connect the loom connectors between the tower assembly and the monitor
assembly, and place the assemblies together, taking care not to trap any wires.
2. Fit, finger tight, three M8x20 Security Screws, Spring and Flat washers to
connect the tower and monitor base.
3. Fit, finger tight, four M8x20 Security...

Page 11
4-2 Connecting the Bike Assemblies to the Cabinets
1. Connect the connectors
between the bike assembly and
cabinet.
2. Place the bike assembly onto
the support bracket and push
the bike against the cabinet
taking care not to trap any
wires.
3. Fit, finger tight, the 4off  M8x20
security screws, spring washers
and flat washers, securing the
Bike Assy to the Monitor Base.
4. Fit, finger tight, the 2off M8x20
security screws, spring washers
and flat washers, securing the
Bike assy to the support...