Namco Point Blank 2 Operators Manual
Have a look at the manual Namco Point Blank 2 Operators Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 93 Namco manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 57
Page 57
5-7 Replacing the Gun Cable
1. Remove the Gu n Assembl y. (see section 5-3 page 53)
2. Remove the Gun Slides. (see section 5-4 page 54)
3. Remove the gun sides. (see section 5-5 page 55)
4. Detach the solenoid bracket, connector and ground wire.
(see section 5-6 page 56)
5. Disconnect the sensor and detach the fast-on connectors from the micro s\
witch.
6. Remove the button bolt (M4x10) fixing the conduit to the gun cover (L\
).
7. Remove 2o ff button bolt (M4x10) and remove the...](http://img.usermanuals.tech/thumb/5509/63182/w64_point-blank-2-operator-s-english_d-56.png "Page 57
Page 57
5-7 Replacing the Gun Cable
1. Remove the Gu n Assembl y. (see section 5-3 page 53)
2. Remove the Gun Slides. (see section 5-4 page 54)
3. Remove the gun sides. (see section 5-5 page 55)
4. Detach the solenoid bracket, connector and ground wire.
(see section 5-6 page 56)
5. Disconnect the sensor and detach the fast-on connectors from the micro s\
witch.
6. Remove the button bolt (M4x10) fixing the conduit to the gun cover (L\
).
7. Remove 2o ff button bolt (M4x10) and remove the...")
![Page 58
Page 58
5-8 Replacing the Monitor
NOTE: -THE MONI TOR IS HE AV Y. A T LEAS T 2 PEOPL E ARE REQUIRE D TO
REMOVE TH E MONI TOR
1. Remove the Play Panel. (see section 5-1 page 51)
2. Remove the front glass by li fting it out of the grooves at the bottom and drawing it
forward.
S tore the glass in a safe place where it will not get broken or cause a da\
nger .
3. Remove the rear door from the cabinet.
4. Disconnect the monitor connectors.
5. Remove 4o ff pozi head screws (M5x16), with flat and...](http://img.usermanuals.tech/thumb/5509/63182/w64_point-blank-2-operator-s-english_d-57.png "Page 58
Page 58
5-8 Replacing the Monitor
NOTE: -THE MONI TOR IS HE AV Y. A T LEAS T 2 PEOPL E ARE REQUIRE D TO
REMOVE TH E MONI TOR
1. Remove the Play Panel. (see section 5-1 page 51)
2. Remove the front glass by li fting it out of the grooves at the bottom and drawing it
forward.
S tore the glass in a safe place where it will not get broken or cause a da\
nger .
3. Remove the rear door from the cabinet.
4. Disconnect the monitor connectors.
5. Remove 4o ff pozi head screws (M5x16), with flat and...")
Page 61 6. PARTS Item Description Part No 10 Mirror - Silvered 100% 31000021 11 Monitor - Hantarex 28 Polo w/o Remote 84000026 15 Loudspeaker - 4½ 20w 62000006 17 Loudspeaker Mesh - Point Blank 2 47000006 18 Front Glass 31000020 19 Schaffner Boot 66000017 20 Front Decal - Pont Blank 2 40000520 21 Swivel Castor - 75mm 59000005 22 Adjustable Foot - M16 x 95 88300079 23 Interlock Switch Cover 39000028 24 Cabinet Decal (LHS) - Point Blank 2 40000518 25 Cabinet Decal (RHS) - Point Blank 2 40000519 29Schaffner Mains-in Filter Assy 66000016 Fuse 5Amp Slo-Blo - 20mm 63500600 30 Interlock Switch 60000006 Items Not Shown Switchmode Power Supply 83000040 Transformer 230v / 18v @3A 67700015 Bridge Rectifier 71000040 Capacitor 22,000mfd 25volt 70200043 1¼ 3A Slo-Blo Fuse 63500547
Page 62 Item Description Part No 2 Top Vac-Form - Point Blank 2 45000196 3 Top Flash Acrylic - Point Blank 2 30000049 4 18 15w Fluorescent Tube 64500000 5 Starter 63000000
Page 63 Item Description Part No 1 Gun Holster 45000199 2 Rope Hoop 45000210 3 Play Panel Overlay - Point Blank 2 40000521 4 Start Button Assembly (Red) - SPB Red 60200235 5 Start Button Assembly (Blue) - SPB Blue 60200237
Page 65 Item Description Part No Gun Assembly Complete - Red XPB-Gun-Red Gun Assembly Complete - Blue XPB-Gun-Blue 1Gun Cover (LHS) - Red XPB-Cover-LR Gun Cover (LHS - Blue XPB-Cover_LB 2 Trigger Spring XPB-296-421 3Trigger - Red XPB-Trigger-R Trigger - Blue XPB-Trigger-B 4 Solenoid - ST-0860A2 XPB-004-056 5 Tube Bracket (A) XPB-296-418 6 Gun Cord Harness Assembly XPB-296-401 7 Tube Bracket (B) XPB-296-423 8 Connector Cover XPB-296-424 9Gun Cover (RHS) - Red XPB-Cover-RR Gun cover (LHS) - Blue XPB-Cover-RB 10Gun Slide (RHS) - Red XPB-Slide-RR Gun Slide (RHS) - Blue XPB-Slide-RB 11 Slide Rail E20+F15R2/60L XPB-296-425 12 E-type Snap Ring 7CR-3 (10dia) XPB-EClip 13 Spacer XPB-296-422 14 Slide Guide XPB-296-417 15Gun Slide (LHS) - Red XPB-Slide-LR Gun Slide (LHS) - Blue XPB-Slide-LB 16 Back Spring XPB-296-420 17 Lens NA-V1472050 XPB-296-426 18 Sensor PCB XPB-296-467 19 Microswitch SS-01G12T XPB-000-228 20 Solenoid Bracket XPB-296-416 21 Silencer Rubber XPB-296-428 22 Hose Chain Clip 45000211 23 Strain Relief Rope 45000708
Page 66 Item Description Part No 1 3.5 ~ 6v Panel Mount Meter 65000002 2Snap-In 20mm Panel Mount Fuseholder 63500786 20mm Fuse - 2A Q/B 63500501 3 SPNO Push Switch 60000059 4 DPCO Slide Switch 60000023 5100 Ù 10w Wire Wound Potentiometer 76000164 Fluted Knob 44000009