NEC 28i/124i Pc Program User Guide

28i/124i PC Program
User Guide
Part No. 92601PCP04
Issue 1-0, May 2001
Printed in U.S.A. (183)
5.03/5.03
92601PCP04.QXD  5/9/01  2:55 PM  Page 1 

This manual has been developed by NEC America.  It is intended for the use of
its customers and service personnel, and should be read in its entirety before
attempting to install or program the system.  Any comments or suggestions for
improving this manual would be appreciated.  Forward your remarks to:
NEC America, Inc., Corporate Networks Group
4 Forest Parkway
Shelton, CT 06484
cng.nec.com
Nothing contained in this manual shall be deemed to be, and this manual does
not constitute a warranty of, or...

i
INSTALLATION
PC Program
User Guide
Table of Contents
Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
If You’re Using System Software 6.00.01 or higher  . . . .1
Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Installing the PC Program  . . . . . . . . . . . . . . . . . . . . . . . .6
Starting the PC Program  . . . . . . . . . . . . . . . . . . . . . . . . . .7
Main Menu  . . . . . . . . . . . . . . . . . . . . . . . . . ....

Print Menu  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Understanding the Print Menu  . . . . . . . . . . . . . . . . . . . .45
The Print Menu Options  . . . . . . . . . . . . . . . . . . . . . . . . .45
Print Menu Help  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Option Menu  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Understanding the Option Menu  . . . . . . . . . . . . . . . . . .51
The Option Menu Options  . . . . ....

INSTALLATION
1 1 1 1
2 2 2 2
3 3 3 3
4 4 4 4
Install the PC Program
Go to Installationon page 1.
Set Up Your Modem
Go to RS-232C Mode on page 53.
Edit the Options
Go to Edit Menu on page 24.
Send the Data
Go to Communication Menu on page 31.
92601PCP04.QXD  5/9/01  2:56 PM  Page iii 

92601PCP04.QXD  5/9/01  2:56 PM  Page iv 

Issue 1-0 Installation 1
INSTALLATION
!! IMPORTANT !!
If you’re system software is currently Commonized 6.00.01 or
higher, you must use PC Program version 5.00 or higher (see
below).
OR
If you’re upgrading from software 5.XX or below to 6.xx, make
sure you follow the instructions below!!
When using Commonized system software 6.00.01 or higher on the 28i or
124i systems, the PC Program version must be 5.00 or higher. Due to data dif-
ferences between the versions of software, the commonized software...

INSTALLATION
2 Installation 92601PCP04
2. Record the entries that are programmed in Program 1001 - Basic
Extension Port Setup (Part A)and Program 1810 - DID Intercept
Options.
This information will not be transferred to the new program
and must be reentered later in the installation process.
3. Install the new PC Program into your computer.
4. Prior to installing the 6.00.01 system software, upload the customer
database to the new PC Program and save the file.
During the upload process, you will receive...

Issue 1-0 Installation 3
INSTALLATION
12. Open the customer’s saved database file in the PC Program.
13. Under the Communication’s ME -> PC option, use the Selected
Programs option to choose Program 0005 - Extension Circuit Type.
Upload this program to the PC Program.
The system will automatically upload Program 1001 as well.
14. Once the upload is complete, save the customer’s database file once again.
Once the system software and PC Programs have been
upgraded and your customer information has been...

INSTALLATION
4 Installation 92601PCP04
- For Your Notes -
92601PCP04.QXD  5/9/01  2:56 PM  Page 4