NEC Accusync Lcd24wmcx Users Manual

AccuSync LCD22WMGX
AccuSync LCD24WMCX
User’s Manual
 

English
English-1
Declaration
Declaration of the Manufacturer
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT
USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS
THE PRONGS CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER...

English-2
For the Customer to use in U.S.A. or Canada
Canadian Department of Communications Compliance Statement
DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouiller du Canada.
C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CSA C22.2 No. 60950-1.
Ce produit porte la marque ‘C-UL’ et se...

English
English-3
Contents
Your new NEC LCD monitor box* should contain the following:
•LCD monitor with tilt base
•Power Cord
•Video Signal Cable (15-pin mini D-SUB to 15-pin mini D-SUB male)
•Video Signal Cable (DVI-D to DVI-D)
•Audio Cable
•User’s Manual
•CD-ROM
•Base Stand
•Cable Holder
Component Names and Functions
User’s ManualPower Cord 15-pin mini D-SUB
to 15-pin mini
D-SUB maleLCD monitor
(Stand not connected) CD-ROM Cable Holder
*Remember to save your original box and packing material to...

English-4
Quick Start
To attach the Base to the LCD Stand:
1. Insert the front of the LCD stand into the holes in the front of the Base (Figure S.1).
2. Attach the Base to the Stand. The locking tab on the Base should fit into the hole
on the back of the Stand (Figure S.1).
To attach the LCD monitor to your system, follow these instructions:
1. Turn off the power to your computer.
2.For the PC or MAC with DVI digital output: Connect the DVI signal cable to
the connector of the display card in your system...

English
English-5 3. Connect one end of the power cord to the monitor and the other end to the power outlet. Use the Cable holder to keep the
Video Signal Cable, Audio cable and power cord together (Figure B.1).
4. To attach the Cable Holder:
Attach the Cable Holder on to the Base. Insert the hooks on the Cable Holder into the holes at the back of the Stand and
slide the Cable Holder downward into place (Figure B.1).
NOTE:Please confirm that the tabs are completely secure.
NOTE:Adjust position of cable...

English-6
Connecting to DVD player, Stereo Amplifier
1. Turn off the power to the monitor.
2.For the DVD player with component out: Connect the Component connecter (RCA) on the LCD monitor, use a
separately available RCA connector cable (Figure D).
For the DVD Player with HDMI out: Connect HDMI cable to the DVD player (Figure D).
NOTE: Refer to your DVD player user’s manual for more information.
For the Stereo Amplifier: Connect HDMI cable to the DVD player. Connect the stereo RCA cable to the SPDIF...

English
English-7
Figure R.1
Non-abrasive surface
Figure R.2
Removing the Base
NOTE:Always remove the Base when shipping the LCD.
1. Place monitor face down on a non-abrasive surface (Figure R.1).
2. While using your thumbs, press the bottom tabs upward to unlock.
3. Pull the unlocked base off the stand.
Connecting a Flexible Arm
This LCD monitor is designed for use with a flexible arm.
Please use the screws (4pcs) as shown in the picture when installing. To meet the safety requirements, the monitor must...

English-8
Controls
OSD (On-Screen Display) control buttons on the front of the monitor function
as follows:
1. Basic Key function
Button
OSD Off
OSD ON(Main menu selection
stage)
OSD ON(Sub menu selection
stage)
Active Auto
Adjustment function
(Press over 2 seconds)Shortcut to volume
window.Shortcut to volume
window.OSD displayed
Act Exit-key Cursor moves up Cursor moves down
Act Exit-key Cursor moves up Cursor moves down Go to Adjustment stage
AUTO- / MENU
Go to Sub menu
selection stageSOURCE
Select...

English
English-9
 Luminance
Contrast
Contrast from Digital-register.
Brightness
Backlight Adjustment.
DV Mode
Adjusts picture as following.
Standard: Brightness = 90, Contrast = 50
(adjustable)
Text: Brightness = 20, Contrast = 80
(nonadjustable)
Internet: Brightness = 40, Contrast = 80
(nonadjustable)
Game: Brightness = 60, Contrast = 80
(nonadjustable)
Movie: Brightness = 80, Contrast = 80
(nonadjustable)
Sports: Brightness = 100, Contrast = 80
(nonadjustable)
Gamma
Gamma Adjustment.
DCR
Dynamic...