NEC Gt2000 Lcd Projector Users Manual
Have a look at the manual NEC Gt2000 Lcd Projector Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 66
E-66 Signal Name Entry Method
Select [Source Edit] ® [Name], then press the ENTER button to change to the
signal name entry display.
Here, the character entry and deletion methods will be described.
A maximum of 10 characters can be entered for the signal name.
Use the remote control number buttons and CTL button to enter the letters.
Example: Enter XGA
1) Enter X. (X is on the 8 button.)
Each press of the 8 button moves the selection through the sequence of
V®W®X®8 which repeats. Select X. To enter...](http://img.usermanuals.tech/thumb/54/91781/w64_nec-gt2000-manual_d-65.png "Page 66
E-66 Signal Name Entry Method
Select [Source Edit] ® [Name], then press the ENTER button to change to the
signal name entry display.
Here, the character entry and deletion methods will be described.
A maximum of 10 characters can be entered for the signal name.
Use the remote control number buttons and CTL button to enter the letters.
Example: Enter XGA
1) Enter X. (X is on the 8 button.)
Each press of the 8 button moves the selection through the sequence of
V®W®X®8 which repeats. Select X. To enter...")
![Page 67
E-67
Changing the Slot Number of the Switcher (Slot)
The slot number can be changed with user memory when the source setting is
RGB 1 / YCbCr 1 or RGB 2 / YCbCr 2.
1) Select [Source Edit] ® [Slot], then press the ENTER button.
The switcher control display will appear.
2) Change the Switcher Control Condition
Press the cursor s/t button and select the slot number, then press the ENTER
button.
The display will change to the slot master display.
When [Standalone] is selected, the display returns to the...](http://img.usermanuals.tech/thumb/54/91781/w64_nec-gt2000-manual_d-66.png "Page 67
E-67
Changing the Slot Number of the Switcher (Slot)
The slot number can be changed with user memory when the source setting is
RGB 1 / YCbCr 1 or RGB 2 / YCbCr 2.
1) Select [Source Edit] ® [Slot], then press the ENTER button.
The switcher control display will appear.
2) Change the Switcher Control Condition
Press the cursor s/t button and select the slot number, then press the ENTER
button.
The display will change to the slot master display.
When [Standalone] is selected, the display returns to the...")
![Page 68
E-68
Setting Auto Search Forced Lock (Source Lock)
When the input signal is switched, the unit automatically performs a memory
search.
This setting mandatorily invalidates auto search.
1) Select [Source Edit] ® [Source Lock], then press the ENTER button.
The source lock display will appear.
2) Setting the Source Lock
Press the cursor s/t button and select On/Off.
On .... Auto search will be invalidated.
(Auto search will not be performed even when the input signal
changes.)
Off .... Auto search will be...](http://img.usermanuals.tech/thumb/54/91781/w64_nec-gt2000-manual_d-67.png "Page 68
E-68
Setting Auto Search Forced Lock (Source Lock)
When the input signal is switched, the unit automatically performs a memory
search.
This setting mandatorily invalidates auto search.
1) Select [Source Edit] ® [Source Lock], then press the ENTER button.
The source lock display will appear.
2) Setting the Source Lock
Press the cursor s/t button and select On/Off.
On .... Auto search will be invalidated.
(Auto search will not be performed even when the input signal
changes.)
Off .... Auto search will be...")
![Page 69
E-69
Viewing the Details of the Input Signal (Display Menu)
This function is convenient for checking the condition of the signal that is
currently being input.
Select [Display Menu] from the main menu and press the ENTER button.
The display will change to the Display menu.
Press the remote control s/t button to select [Input Signal], then press the
ENTER button.
The details of the input signal will be displayed.
To turn off the display, press the MENU button. The display will return to the
previous...](http://img.usermanuals.tech/thumb/54/91781/w64_nec-gt2000-manual_d-68.png "Page 69
E-69
Viewing the Details of the Input Signal (Display Menu)
This function is convenient for checking the condition of the signal that is
currently being input.
Select [Display Menu] from the main menu and press the ENTER button.
The display will change to the Display menu.
Press the remote control s/t button to select [Input Signal], then press the
ENTER button.
The details of the input signal will be displayed.
To turn off the display, press the MENU button. The display will return to the
previous...")
![Page 70
E-70
¥ Detailed list of memory
This function displays detailed information about the registered
memory.
1. Call up the memory display.
Select [Memory]®[User Memory] or [Channel Memory]
from the main menu.
2. Select the memory number you wish to view.
Press the remote control s/t button and select the list
number or channel number.
3. Display the contents of the memory.
Press and hold the remote control CTL button, then press the
DISPLAY button.
To turn off the diplay, press the MENU button.CONTROLLING...](http://img.usermanuals.tech/thumb/54/91781/w64_nec-gt2000-manual_d-69.png "Page 70
E-70
¥ Detailed list of memory
This function displays detailed information about the registered
memory.
1. Call up the memory display.
Select [Memory]®[User Memory] or [Channel Memory]
from the main menu.
2. Select the memory number you wish to view.
Press the remote control s/t button and select the list
number or channel number.
3. Display the contents of the memory.
Press and hold the remote control CTL button, then press the
DISPLAY button.
To turn off the diplay, press the MENU button.CONTROLLING...")
![Page 71
E-71
Default Settings of the Switcher
Picture settings at the time of shipping from the factory are as described below.
Please adjust and set required items.
Press the MENU button to display [Main Menu], select [Switcher] with the
cursor button, then press the ENTER button to display the switcher menu.Main Menu
Picture
Alignment
Memory
Switcher
Display Menu
Settings Menu
Source
Switcher
R Gain
G Gain
B Gain
Color
Tint
Sharpness
Volume
Audio Select
Ð+
Switcher Picture Adjustment
Select [Switcher] from the...](http://img.usermanuals.tech/thumb/54/91781/w64_nec-gt2000-manual_d-70.png "Page 71
E-71
Default Settings of the Switcher
Picture settings at the time of shipping from the factory are as described below.
Please adjust and set required items.
Press the MENU button to display [Main Menu], select [Switcher] with the
cursor button, then press the ENTER button to display the switcher menu.Main Menu
Picture
Alignment
Memory
Switcher
Display Menu
Settings Menu
Source
Switcher
R Gain
G Gain
B Gain
Color
Tint
Sharpness
Volume
Audio Select
Ð+
Switcher Picture Adjustment
Select [Switcher] from the...")
![Page 72
E-72
Audio Control of the Switcher
This is the audio adjustment of the switcher AUDIO OUTPUT.
Setting the Volume (Volume)
This function sets the volume adjustment data that corresponds to the slot.
Select [Switcher] from the main menu.
Press the cursor s/t button and select [Volume].
When the item to be adjusted is selected, the adjustment bar of the selected
item is displayed at the bottom edge of the display.
Adjust with the cursor § (Ð)/ © (+) button.
The adjustment range is from 0 to 63.
(Ð)...](http://img.usermanuals.tech/thumb/54/91781/w64_nec-gt2000-manual_d-71.png "Page 72
E-72
Audio Control of the Switcher
This is the audio adjustment of the switcher AUDIO OUTPUT.
Setting the Volume (Volume)
This function sets the volume adjustment data that corresponds to the slot.
Select [Switcher] from the main menu.
Press the cursor s/t button and select [Volume].
When the item to be adjusted is selected, the adjustment bar of the selected
item is displayed at the bottom edge of the display.
Adjust with the cursor § (Ð)/ © (+) button.
The adjustment range is from 0 to 63.
(Ð)...")
E-71 Default Settings of the Switcher Picture settings at the time of shipping from the factory are as described below. Please adjust and set required items. Press the MENU button to display [Main Menu], select [Switcher] with the cursor button, then press the ENTER button to display the switcher menu.Main Menu Picture Alignment Memory Switcher Display Menu Settings Menu Source Switcher R Gain G Gain B Gain Color Tint Sharpness Volume Audio Select Ð+ Switcher Picture Adjustment Select [Switcher] from the main menu. Press the cursor s/t button and select the adjustment item. When the item to be adjusted is selected, the adjustment bar of the selected item is displayed at the bottom edge of the display. Adjust with the cursor § (Ð)/ © (+) button. Returning the Picture Adjustment to the Standard Set- tings This function returns the adjustments of the R, G, and B gains, the color, tint, and sharpness to the standard settings. Example: Return the R Gain to the Standard Setting. Press the cursor s/t button and select [R Gain]. When the item to be adjusted is selected, the adjustment bar of the selected item is displayed at the bottom edge of the display. Press the NORMAL button. A verification display ÒNormalize ?Ó will appear. Press the cursor s/t button, select Yes/No, then press the ENTER button. The setting will return to the factory setting value of the switcher. Switcher R Gain G Gain B Gain Color Tint Sharpness Volume Audio Select Ð+32 Switcher R Gain G Gain B Gain Color Tint Sharpness Volume Audio Select Ð+32 Normalize? Ye s No Setting at the time of shipping from the factory is ÔProjectorÓ.
E-72 Audio Control of the Switcher This is the audio adjustment of the switcher AUDIO OUTPUT. Setting the Volume (Volume) This function sets the volume adjustment data that corresponds to the slot. Select [Switcher] from the main menu. Press the cursor s/t button and select [Volume]. When the item to be adjusted is selected, the adjustment bar of the selected item is displayed at the bottom edge of the display. Adjust with the cursor § (Ð)/ © (+) button. The adjustment range is from 0 to 63. (Ð) Direction..........The volume decreases. (+) Direction..........The volume increases. Adjusting Volume of Switcher with Remote Control (Audio Select) This is a setting that adjusts the volume of the switcher with the VOLUME button on the remote control. Select [Switcher] ® [Audio Select] of the main menu. When the item to be adjusted is selected, the setting condition is displayed at the bottom edge of the display. A press of the ENTER button changes the display to the audio control display. Press the cursor s/t button and select Switcher / Remote control. Switcher................ Permits volume adjustment of the switcher using the VOLUME button of the remote control. Projector............... Permits volume adjustment of the projector using the VOLUME button of the remote control. * The Switcher menu displays only when the switcher is connected with the GT2000/GT2000R and Switcher Control mode is set to either SW 1 Level or SW 2 Level. Note:When the switcher is not connected, Switcher cannot be selected. Switcher R Gain G Gain B Gain Color Tint Sharpness Volume Audio Select Projector Switcher R Gain G Gain B Gain Color Tint Sharpness Volume Audio Select Ð+32
E-73 5MAINTENANCE Step 1 Step 2 Step 3 Step 4 Step 5 This section describes the simple maintenance procedures you should follow to replace the lamp, clean or replace the filter, and replace the batteries in the remote control. Replacing The Lamp After your lamp has been operating for 2000 hours or longer, the red ÒstatusÓ light in the cabinet will go on and the lamp icon will appear on the above right of the screen whenever the projector is turned on. The lamp icon remains on after 2100 hours of service. Even though the lamp may still be working, replace it at 2000 hours to maintain optimal projec- tor performance. CAUTION ¥ DO NOT TOUCH THE LAMP immediately after it has been used. It will be extremely hot. Allow at least one hour for the lamp to cool before handling. ¥ DO NOT REMOVE ANY SCREWS except the lamp cover set screw and two lamp case screws. You could receive an electric shock. ¥ Do not touch the front surface portion of the replacement lamp body in which glass is used. Touching the glass portion or bulb tip may result in a drop of the brightness or shortened bulb life. ¥ Turn off the main power to the projector and disconnect the power cord. Allow at least one hour for the lamp to cool. ¥ If you continue to use the lamp after 2000 hours of use, the lamp bulb may shatter, and pieces of glass may be scattered in the lamp case. Do not touch them as the pieces of glass may cause injury. If this happens, contact your NEC dealer for lamp replacement. To replace the lamp: 1. Loosen the single captive screw that secures the lamp housing cover and remove the cover. 2. Loosen the two captive screws securing the lamp case. 3. Remove the lamp by pulling out the complete assembly. 4. Install a new lamp case assembly and secure it in place with the two captive screws. CAUTION: Do not use a lamp other than the NEC replacement lamp. Order this from your NEC dealer using your projectors model number. 5. Reattach the lamp housing cover and tighten the single captive screw. 6. After you install a new lamp, select [Display] from the main menu, and press the ENTER button. Then press the remote s/t button to select [Lamp Usage], then press the NORMAL button to display the Reset menu. Press the remote s/t button to select [Yes] and press the ENTER button. This resets the lamp clock back to zero. Note: When you replace the lamp, it is also wise to replace the filter. The filter comes in the same package with your replacement lamp. To check and reset the lamp usage time To view the lamp usage time: 1. Select [Display Menu] from the main menu and press the ENTER button. 2. Press the remote s/t button to select [Lamp Usage]. The usage time will be displayed at the bottom right of the menu. Note: After your lamp has been operating for 2000, a warning icon will appear. To reset the lamp clock back to zero: 1. Select [Display] from the main menu, and press the ENTER button. 2. Press the remote s/t button to select [Lamp Usage], then press the NORMAL button. 3. Press the remote s/t button to select [Yes] and press the ENTER button. This resets the lamp clock back to zero. Also the STATUS indicator goes off. MEMU SELECT ZOOMFOCUS STATUS POWER ON / OFFENTER MEMU SELECT ZOOMFOCUS STATUS POWER ON / OFFENTER MEMU SELECT ZOOMFOCUS STATUS POWER ON / OFFENTER MEMU SELECT ZOOMFOCUS STATUS POWER ON / OFFENTER MEMU SELECT ZOOMFOCUS STATUS POWER ON / OFFENTER Lamp housing cover Captive screw Interlock Captive screw
E-74 Cleaning Or Replacing The Filter The air-filter sponge keeps the inside of the MultiSync GT2000/ GT2000R LCD Projector free from dust or dirt and should be cleaned after every 100 hours of operation (more often in dusty conditions). If the filter is dirty or clogged, your projector may overheat. NOTE: Clean your filter after every 100 hours of operation. CAUTION ¥ Turn off the main power and unplug the projector before replacing the filter. ¥ Only clean the outside of the filter cover with a vacuum cleaner. ¥ Do not attempt to operate the projector without a filter cover. ¥ Your LCD projector will not operate unless the filter cover is installed correctly. To clean the air-filter: Vacuum the filter through the filter cover. To replace the air-filter: 1. Remove the filter cover by pushing up on the catch of the cover until you feel it detach. 2. Reinstall the new filter cover. NOTE:Do not detach the sponge from the filter cover. Do not wash the filter cover with soap and water. Soap and water will damage the filter membrane. Before replacing the filter cover, remove dust and dirt from the projector cabinet. Keep out dust and dirt during filter replacement. Remote Control Battery Installation AC IN MENU SELECT ENTER STATUS ZOOMFOCUS POWER ON / OFF-+ -+-+ AC IN MENU SELECT ENTER STATUS ZOOMFOCUS POWER ON / OFF-+ -+-+ Installing the Remote Control Batteries When it comes time to replace the batteries, two AAA type will be required. 1. Press and open the cover. 2. Align the batteries according to the (+) and (-) indications inside the case. 3. Replace the cover.
E-75 Etape 1 Etape 2 Etape 3 Etape 4 Etape 5 Cette section dŽcrit les procŽdures simples dÕentretien que vous aurez ˆ suivre pour remplacer la lampe, nettoyer ou remplacer le filtre et remplacer les piles de la tŽlŽcommande. Remplacement de la lampe Lorsque la lampe a ŽtŽ utilisŽe pendant 2000 heures ou plus, le voyant fonctionner, remplacez-la au bout de 2000 heures pour conserver une performance optimale de votre projecteur. PRECAUTION ¥ la manipuler.. ¥ NE RETIREZ AUCUNE VIS mis ˆ part la vis qui fixe le couvercle de lampe et les deux vis du compartiment de lampe. Vous risquez de recevoir une dŽcharge ŽlŽctrique. ¥ Mettez le projecteur hors circuit et dŽbranchez le cordon dÕalimentation. Laissez refroidir la lampe pendant au moins une heure. ¥ dÕutilisation. Dans ce cas, remplacez la lampe. Si vous continuez compartiment de la lampe. Ne les touchez pas car elles peuvent vous blesser. Dans ce cas, contactez votre revendeur NEC afin de procŽder au remplacement de la lampe. Pour remplacer la lampe: 1. Retirez lÕunique vis qui fixe le couvercle de lampe et retirez le couvercle 2. Retirez les deux vis qui fixent le compartiment de lampe. (Afin de prŽvenir contre un risque de dŽcharge Žlectrique, il y a un enclenchement sur ce compartiment. Ne tentez pas de dŽtourner cet enclenchement.) 3. Retirez la lampe en tirant tout lÕassemblage. 4. Installez un nouvel assemblage de compartiment lampe et fixez-le avec les deux vis. PRECAUTION: NÕutilisez pas dÕautres lampes quÕune lampe de rechange NEC 5. Fixez de nouveau le couvercle de lampe et replacez la vis unique. 6. Une fois la nouvelle lampe installŽe. REMARQUE: RŽinitialiser la durŽe totale dÕ usage de lampe. (Se rperorter ˆ la page E-73.) REMARQUE: Lorsque vous remplacez la lampe, Lorsque vous remplacez la lampe, il est recommandŽ de changer Žgalement le filtre. Le filtre se MEMU SELECT ZOOMFOCUS STATUS POWER ON / OFFENTER MEMU SELECT ZOOMFOCUS STATUS POWER ON / OFFENTER MEMU SELECT ZOOMFOCUS STATUS POWER ON / OFFENTER MEMU SELECT ZOOMFOCUS STATUS POWER ON / OFFENTER MEMU SELECT ZOOMFOCUS STATUS POWER ON / OFFENTER Couvercle de lampe Vis Enclenchement Vis
E-76 Nettoyage ou remplacement du filtre Le coussin Žponge du filtre ˆ air maintient lÕintŽrieur du projecteur ˆ affichage ˆ cristaux liquides MultiSync GT2000 / nettoyŽ toutes les 100 heures dÕutilisation (plus souvent dans les endroits poussiŽreux). Si le filtre est sale ou bouchŽ, le projecteur risque de surchauffer. REMARQUE: Nettoyez le filtre toutes les 100 heures dÕutilisation. PRECAUTION ¥ Coupez lÕalimentation et dŽbranchez le projecteur avant de remplacer le filtre. ¥ Nettoyez uniquement le couvercle extŽrieur du filtre avec un aspirateur. ¥ NÕessayez pas de faire fonctionner le projecteur sans filtre. ¥ Votre projecteur ˆ affichage ˆ cristaux liquides ne fonctionnera pas tant que le filtre ne sera pas installŽ correctement. Pour nettoyer le filtre ˆ air: Aspirez le filtre ˆ travers le couvercle de filtre. Pour remplacer le filtre ˆ air: 1. Retirez le panneau du filtre en poussant vers le haut sur le jusquÕˆ ce que vous sentiez quÕil se dŽtache. 2. RŽinstallez le panneau du filtre. REMARQUE:Ne dŽtachez pas le coussin Žponge du couvercle de filtre. Ne lavez pas le filtre au savon et ˆ lÕeau. Le savon et lÕeau endommageront la membrane du filtre. Avant de remplacer le filtre ˆ air, dŽpoussiŽrez et nettoyez le coffret du projecteur. Maintenez propre pendant le remplacement du filtre. Installation des piles de la tŽlŽcommande 1. Appuyez fermement et retirez le couvercle des piles en le faisant glisser. 2. Retirez les deux piles usagŽes et installez de nouvelles piles (AA). Assurez-vous de respecter la polaritŽ (+/Ð) des piles. 3. Remettez le couvercle des piles en le faisant glisser, jusquÕˆ ce quÕil sÕembo”te. AC IN MENU SELECT ENTER STATUS ZOOMFOCUS POWER ON / OFF-+ -+-+ AC IN MENU SELECT ENTER STATUS ZOOMFOCUS POWER ON / OFF-+ -+-+
E-77 TROUBLESHOOTING6 This section helps you resolve problems you may encounter while setting up or using your MultiSync GT2000/GT2000R LCD Projector. Status Light Messages Status mNormal mThe projector lamp has exceeded 2000 hours of operation and should be replaced. mEither the lamp cover or filter cover is not fastened properly. Check each and reattach them if necessary. mThe cooling fan has stopped. Contact your NEC dealer for service. mThe lamp is not turned on. ¥ The projector was turned off and back on too quickly. Turn off the projector, wait one minute, then turn the projector back on. Or the lamp is burnt out. mNormal (The projector is used with the ISS-6020 switcher in bundled operation.) mThe projector is not connected with the ISS-6020. Condition OFF On continually Blinking very rapidly (On and off in a cycle of 1 sec.) Blinking slowly (On and off in a cycle of 8 sec.) Blinking very slowly (On and off in a cycle of 12 sec.) On continually Blinking very slowly (On and off in a cycle of 12 sec) Red Green
E-78 Common Problems & Solutions Problem Does not turn on No picture Image isnÕt square to the screen Picture is blurred Image is scrolling vertically, horizontally or both Volume button does not work Remote control does not work Status indicator is lit or blinking Cross color in RGB modeCheck These Items ¥ Check that the cord is plugged in and that the power switch on the front panel is on. ¥ Ensure that the filter cover is installed correctly. ¥ Check to see if the projector has overheated or the lamp usage exceeds 2100 hours. If there is insufficient ventilation around the projector or if the room where youre presenting is particularly warm, move the projector to a cooler location. Check the filter and clean it if necessary. ¥ Select your source (Video, S-Video, RGB1, or RGB2). ¥ Ensure your cables are connected properly. ¥ Adjust the brightness and contrast. ¥ Remove the lens cap. ¥ Check if RGB/YCbCr mode is set to YCbCr when a DVD player with component output is connected. (See page E-48.) ¥ Check if the Source Lock is set to Off. If not, select [Memory Edit] ->[Source Lock] and set to Off. If the Source Lock is set to ON, search is not performed when you switch to another input. (See page E-68.) ¥ Adjust alignment correctly when RGB input is selected. (See page E-49.) ¥ Reposition the projector to improve its angle to the screen. ¥ Correct the keystone distortion. (See page E-40.) ¥ Set Sync position to 0 or 1 to correct the wave pattern. (See page E-55.) ¥ Adjust the focus. ¥ Reposition the projector to improve its angle to the screen. ¥ Ensure that the distance between the projector and screen is within the adjustment range of the lens. ¥ Condensation may form on the lens when the cold projector is brought into a warm place and is turned on. Should this happen, let the projector stand until there is no condensation on the lens. ¥ Select the source you want to input. ¥ Make sure the recalled user memory or channel memory supports the current input signal. (See page E-56.) ¥ Check if Audio Select is set to Switcher when the switcher is connected. (See page E-72.) ¥ Install new batteries. (See page E-74.) ¥ Make sure there are no obstacles between you and the projector. ¥ Stand within 7m of the projector. ¥ Check if the projector ID is the same as the remote ID. Or check if the remote ID is set to 00. (See page E-43.) See the Status Light message chart on page E-77. Adjust the image with the Picture Adjustment and Fine Picture Adjustment.
E-79 SPECIFICATIONS7 This section provides technical information about the MultiSync GT2000/GT2000R LCD Projectors performance. Model Number GT2000 / GT2000R Optical LCD Panel 1.3, p-Si TFT active-matrix, 136621024 dots Lens GT2000 : F 2.5 f = 52 Ð 68 mm (Power zoom, power focus) GT2000R: F2.5 f = 30 mm (Fixed focus) Lamp New short arc high pressure lamp 150 W Image Size GT2000 : 20 Ð 300 inches (50.8 Ð 762 cm) diagonal GT2000R : 40 Ð 200 inches (102 Ð 508 cm) diagonal Projection Distance GT2000 : 1.0 Ð 12.0 m (3.08 - 39.37 ft) GT2000R : 0.8 Ð 4.6 m (2.75 - 15.2 ft) Electrical Inputs Video (NTSC / PAL / SECAM / NTSC4.43) RGB (H : 15 Ð 107 kHz, V : 50 Ð 105 Hz) Video Bandwidth RGB: 150 MHz Color Reproduction Full color, 16.7 million colors simultaneously. Horizontal Resolution 550 TV lines at S-Video : NTSC / PAL 300 TV lines : SECAM / NTSC 4.43 1000 TV lines : Y/Cb/Cr RGB 1366 dots horizontal, 1024 dots vertical Power Requirement 100 Ð 120 / 220 Ð 240 VAC, 50 / 60 Hz Input Current 5 / 2 A Mechanical Dimensions GT2000 : 29.3 cm (W)217. 1 cm (H)240. 5 cm (D) with lens 11. 6Ó (W)26. 8Ó (H)216. 0Ó (D) with lens GT2000R : 29.3 cm (W)217.1 cm (H)247.8 cm (D) with lens 11. 6Ó (W)26. 8Ó (H)218. 9Ó (D) with lens Net Weight GT2000 : 8. 0 kg / 17. 7 lbs GT2000R : 10. 0 kg / 22. 1 lbs Operational Temperatures LCD projector: 0° to 40°C / 32° to 104° F, 20 Ð 80% humidity Remote control: 0° to 60°C / 32° to 140° F Regulations UL Approved (UL 1950, CSA 950) Meets DOC Canada requirements Meets FCC Class A requirements Meets EMC Directive (EN55022, EN61000-3-2, EN61000-3-3, EN50082-1) Meets Low Voltage Directive (EN60950, T†V GS Approved)
E-80 Cabinet Dimensions Unit : mm (inch) 92.2 (3.6) 378 (15) 171 (6.7)111.5 (4.4) Lens center290 (11.4) not including side protrusion 84.2 (3.3) MAX. 99.96 (3.9) MAX. 95.76 (3.8)378 (15) 405 (16) 171 (6.7)290 (11.4) not including side protrusion 111.5 (4.4) Lens center Lens center Lens center GT2000 GT2000R