Home > NEC > Projector > NEC L51w Led Projector Specifications

NEC L51w Led Projector Specifications

    Download as PDF Print this page Share this page

    Have a look at the manual NEC L51w Led Projector Specifications online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							NEC L51W LED
    Order Code: 60003377NEC L51W LED Professional Mobile Projector
    Get innovative LED technology in an extremely compact and 
    lightweight  format  and  with  a  very  stylish  look.  The  L51W  
    LED  is  a  fully  featured  mobile  projector  with  a  
    comprehensive  input  panel  as  well  as  an  integrated  office  
    viewer for PC-less and wireless presentations.  Low power 
    consumption  and  a  lifetime  of  the  light  source  of  20.000  
    hrs result in a very low total cost of ownership.
    An  ideal  solution  for  mobile  and  corporate  applications  as  
    well as cross-use (private/professional).
    DELIVERING GENUINE BENEFITS
    Ease of Use -  thanks to auto keystone and auto input detection.
    Extremely Compact and Lightweight -  due to innovative LED 
    technology.
    Reduced to the Max -  minimalistic design with full connectivity 
    and integrated power supply .
    Wide format -  for extra space in presentations and video content 
    in native aspect ratio - no quality loss due to format scaling.
    Wireless presentation -  run presentations and slide shows 
    wireless from your smart phone, tablet or PC.
    OUTSTANDING PERFORMANCE
    Optional WLAN  - For wireless presentation·
    3D Ready - DLP®-link™ technology with 120Hz·
    Fast and Reliable LED  Technology·
    HDMI & USB Input - to connect various digital devices·
    USB and SD Card Reader  - for PC-less presentations and slide shows·
    Full Office Viewer - supporting office file formats, images and video·
    This document is © copyright 2012 NEC Display Solutions Europe GmbH. 
    All rights reserved in favour of their respective owners. All hardware and software names are brand names and/or registered trademarks of the respective manufacturers. All 
    specifications are subject to change without notice. Errors and omissions are excepted. 28.06.2012
    www.nec-display-solutions.com  
    						
    							NEC L51W LED
    SPECIAL CHARACTERISTICS
    1 GB integrated memory, 3D ready, Auto Power ON/OFF, Auto Power 
    Start, Automatic and manual vertical Keystone Correction (V= ±40°), 
    Digital  Zoom,  Kensington  security  slot,  Keypad  Lock,  LED  Light  
    Source,  Lens  Cover,  Off-Timer,  Optional  WLAN,  Quick-Start-/Direct-
    Power-Off  Function,  SD  Card  Reader,  Tripod  thread,  USB  Display,  
    USB Viewer, Wall Colour Correction
    Energy EfficiencyOff-Timer; LED light source with 20.000 
    hrs life time; Very low power usage
    Ecological Materials100% recyclable packaging; Downloadable 
    manuals
    Ecological StandardsRoHs compliant; ErP compliant; WEEE
    Technical Specification NEC L51W LED
    IMAGE
    Native Resolution1280 x 800 (WXGA)
    Brightness  1500 ANSI Lumen
    Contrast Ratio  14000:1
    LampLED Light Source (no lamp required)
    LensF= 1.5, f= 13.92 mm
    Projection Factor1.4 : 1
    Projection Angle [°]13.8
    Projection Distance [m]0.52 – 3
    Screen Size (diagonal) [cm]Minimum: 43.2 / 17"; Maximum: 254 / 100"
    Focus AdjustmentManual
    Supported Resolutions1920 x 1080 (HDTV / 1086 i); 1680 x 1050 (WSXGA+); 1440 x 900 
    (WXGA); 1400 x 1050 (SXGA+); 1366 x 768 (WSXGA+); 1280 x 1024 
    (SXGA); 1280 x 960 (QVGA); 1280 x 800 (WXGA); 1280 x 768 
    (WXGA); 1280 x 720 (720 p); 1152 x 870 (MAC); 1152 x 864 (SXGA); 
    1024 x 768 (XGA); 800 x 600 (SVGA); 720 x 576 (576 i/p); 720 x 480 
    (480 i/p); 640 x 480 (VGA)
    FrequencyHorizontal: 30 – 100 kHz; Vertical: 50 – 85 Hz
    CONNECTIVITY
    RGB (analog)Input: 1 x Mini D-sub 15-pin, compatible to component (YPbPr)
    HDMI®Input: 1 x HDMI® (Deep Color, Lip sync)
    VideoInput: 1 x RCA
    AudioInput: 1 x 3.5 mm Stereo Mini Jack
    USB1 x Type A (USB 2.0 high speed); 1 x Type B
    Video SignalsPAL; PAL60; NTSC; SECAM; NTSC 4.43; PAL-N; PAL-M
    SD Cardyes
    REMOTE CONTROL
    Remote ControlAudio Control; Auto Adjust; Digital Zoom; Source Select
    ELECTRICAL
    Power Supply100-240 V AC; 50 - 60 Hz
    Power Consumption [W]105 Normal Mode; 70 Eco Mode; 0.5 Power Savings Mode
    MECHANICAL
    Dimensions (W x H x D) [mm]226 x 43 x 174 (without lens and feet)
    Weight [kg]1.2
    Fan Noise [dB (A)]32 / 38 (Eco / Normal)
    OPTIONAL ACCESSORIES
    Optional AccessoriesWireless LAN module NP03LM (Europe, South Africa), NP02LM2 
    (Middle East, Africa, Ukraine), NP02LM3 (Russia)
    ERGONOMICS
    Safety and ErgonomicsCE; ErP; TÜV GS; RoHS
    Speakers [W]1 x 2 (mono)
    WARRANTY
    Projectors3 years pan-European service
    SHIPPING CONTENT
    Shipping ContentsProjector; IR remote control; Mini D-SUB Signal Cable; Power Cord; 
    Soft Case; Users Manual on CD-ROM; Quick Setup Guide
    1  Compliance with ISO21118-2005  
    						
    							 
    – 3 – 
    TABLE OF CONTENTS 
    SYSTEM OVERVIEW ............................ 5 
    General .......................................................5 
    A Partitioned System ..................................6 
    Zones ..........................................................6 
    Fire Protection ............................................6 
    Burglary Protection .....................................7 
    Alarms .........................................................7 
    Memory of Alarm ........................................7 
    Speed Key (Macros) ...................................8 
    Using Schedules .........................................8 
    Device Timers .............................................8 
    To Access Another Partition (GOTO 
    Command) ..................................................8
     
    Master Keypad Operation ...........................9 
    Self-Help Feature........................................9 
    Phone Access & Voice Response 
    Capability ....................................................9
     
    ABOUT THE KEYPADS ....................... 10 
    General .....................................................10 
    The Alpha Keypad ....................................10 
    FUNCTIONS OF THE KEYPAD ........... 11 
    ENTRY/EXIT DELAYS ......................... 14 
    General Information ..................................14 
    SECURITY CODES & AUTHORITY 
    LEVELS ............................................ 15
     
    General Information ..................................15 
    Duress Code .............................................15 
    Quick Arming ............................................15 
    Authority Levels ........................................16 
    General Rules on Authority Levels and 
    Changes....................................................17
     
    To Exit User Edit Mode .............................17 
    To Add a User ...........................................18 
    To Change a User’s Code ........................20 
    To Delete a User .......................................20 
    ACCESSING OTHER PARTITIONS..... 21 
    To Access Another Partition .....................21 
    Global Arming ...........................................21 
    Master Keypad Operation .........................22 
    Common Lobby Operation........................24 
    How User Codes Affect the Common 
    Lobby ........................................................25
     
    CHECKING FOR OPEN ZONES ......... 26 
    Using the  T  READY Key .......................26 
    DISPLAYING ALL ZONE 
    DESCRIPTORS................................ 27
     
    Using the ✳  READY Key ......................27 
    BYPASSING PROTECTION ZONES ... 28 
    Using the   6  BYPASS Key ....................28 
    Quick Bypass ............................................29 
    Displaying Bypassed Zones .....................29 
    ARMING PERIMETER ONLY .............. 30 
    Using the   3  STAY key..........................30 
    ARMING PERIMETER ONLY .............. 31 
    Using the   7  INSTANT Key ...................31 
    ARMING ALL PROTECTION ............... 32 
    Using the   2  AWAY Key ........................32 
    ARMING ALL PROTECTION ............... 33 
    Using the   4  MAXIMUM Key .................33 
    DISARMING AND SILENCING 
    ALARMS........................................... 34
     
    Using the   1  OFF Key ...........................34 
    Memory of Alarm ......................................34 
    USING THE KEYSWITCH ................... 35 
    General .....................................................35 
    Arming.......................................................35 
    Disarming ..................................................35 
    CHIME MODE ..................................... 36 
    Using the   9  Key....................................36 
    VIEWING ALARM COMPANY 
    MESSAGES ..................................... 37
     
    General Information ..................................37 
      
    						
    							 
     
    – 4 – 
    PANIC KEYS........................................ 38 
    Using Panic Keys ..................................... 38 
    SPEED KEY (MACROS) ...................... 39 
    General Information .................................. 39 
    Defining .................................................... 39 
    Executing .................................................. 40 
    Using Speed Key For Fire Alarm 
    Function .................................................... 40
     
    ACCESS DOOR CONTROL ................ 41 
    General Information .................................. 41 
    Executing .................................................. 41 
    USING #70 RELAY MENU MODE ....... 42 
    General Information .................................. 42 
    USING SCHEDULES ........................... 43 
    Delaying the Closing Time ....................... 43 
    Temporary Open/Close Schedules .......... 43 
    Programming Temporary Schedules........ 44 
    PROGRAMMING DEVICE TIMERS ..... 46 
    General Information .................................. 46 
    USING #77 INSTANT ACTIVATION 
    MODE ............................................... 48
     
    EVENT LOG PROCEDURES............... 51 
    General Information .................................. 51 
    To Display The Event Log ........................ 51 
    TESTING THE SYSTEM (TO BE 
    CONDUCTED WEEKLY) ..................53
     
    Using the   5  TEST Key ......................... 53 
    Testing Your System ................................ 53 
    FIRE ALARM SYSTEM ........................54 
    In Case Of Fire Alarm ............................... 54 
    Silencing A Fire Alarm .............................. 54 
    Fire Display Lock ...................................... 55 
    Fire Drill Test (Code + # + 69) .................. 55 
    TROUBLE CONDITIONS .....................56 
    Typical Trouble Displays .......................... 56 
    Power Failure ........................................... 57 
    EMERGENCY EVACUATION ..............58 
    MAINTAINING YOUR SYSTEM ...........59 
    Taking Care of Your System .................... 59 
    Replacing Batteries in Wireless 
    Sensors .................................................... 59
     
    Silencing Low Battery Warning Tones 
    at the Keypad ........................................... 60
     
    Routine Care ............................................ 60 
    QUICK GUIDE TO SYSTEM 
    FUNCTIONS .....................................61
     
    SUMMARY OF AUDIBLE 
    NOTIFICATION .................................63
     
    INDEX ..................................................68  
    						
    							 
     
    – 5 – 
    System Overview 
    General 
    Your Honeywell security system consists of a main control panel, at least one 
    keypad, and various sensors strategically positioned throughout the 
    premises. The system offers you three forms of protection: burglary, fire and 
    emergency. The keypad provides full control of system operation. 
    The system uses microcomputer technology to monitor all protection zones 
    and system status and provides appropriate information for display on the 
    keypad(s) used with the system, and initiates appropriate alarms. Your 
    system may also have been programmed to automatically transmit alarm or 
    status messages over the phone lines to a central alarm monitoring station. 
    This manual is designed to help you become comfortable operating 
    your system. Each function is explained in step-by-step detail. We 
    recommend you read the SYSTEM OVERVIEW section to become 
    familiar with the terminology and the basic features of the system. 
    NOTE: All references in this manual for number of zones, user codes, 
    partitions, VistaKey modules, the master partition and the event log 
    capacity, use the VISTA-128FB’s features. The following table lists 
    the differences between the VISTA-32FB and the VISTA-128FB 
    control panels. All other features are identical for both panels. 
    Also, all procedures in this guide for entering zone numbers or user 
    numbers show 3-digit entries, which is valid for the VISTA-128FB. 
    For the VISTA-32FB these entries are only 2-digits. 
     
    Feature VISTA-32FB VISTA-128FB 
    Partitions 2 8 
    Number of Zones 32 128 
    Number of User Codes 75 150 
    Master Partition 3 9 
    VistaKey Modules 4 8 
     
     
     
     
      
    						
    							 
     
    – 6 – 
    System Overview (cont’d) 
    A Partitioned System 
    Simply stated, a partitioned system shares one physical alarm system among 
    different users, each with their own requirements. For the most part, you as 
    a user need not know about other users and their structure in the system, 
    but from time to time, you may see display messages which indicate the 
    system is in use by another user. Do not be concerned, this is normal. Refer 
    to the ACCESSING OTHER PARTITIONS section for additional information. 
    Zones 
    Your system’s sensing devices have been assigned to various zones. For 
    example, the sensing device on your Entry/Exit door may have been assigned 
    to zone 001, sensing devices on windows in the master bedroom to zone 002, 
    and so on. These numbers will appear on the display, along with an alpha 
    descriptor for that zone (if programmed), when an alarm or trouble condition 
    occurs. 
    Fire Protection 
    The fire protection portion of your security system (if used) is always on and 
    will sound an alarm if a fire condition is detected. Refer to the FIRE ALARM 
    SYSTEM section for important information concerning fire protection, smoke 
    detectors and planning emergency exit routes from your facility. 
     
     
     
     
     
     
     
     
     
     
     
     
     
      
    						
    							 
     
    – 7 – 
    System Overview (cont’d) 
    Burglary Protection 
    The burglary protection portion of your system must be turned on or armed 
    before it will sense burglary alarm conditions. Your system provides four 
    modes of burglary protection: STAY, AWAY, INSTANT and MAXIMUM, and 
    even allows you to BYPASS selected zones of protection while leaving the 
    rest of the system armed. The system also provides a CHIME mode, for 
    alerting users to the opening and closing of doors and windows while the 
    system is disarmed. Refer to the other sections of this manual for procedures 
    for using these features. 
    The following table lists the four different arming modes and the results of 
    each. 
     Features For Each Arming Mode 
    Arming Mode  Exit Delay  Entry Delay  Perimeter Armed 
    AWAY Yes Yes Yes 
    STAY Yes Yes Yes 
    INSTANT Yes No Yes 
    MAXIMUM Yes  No  Yes 
     
    Alarms 
    When an alarm occurs, both the keypad and external sounders will sound, 
    and the keypad will display the zone(s) causing the alarm. If your system is 
    connected to a central monitoring station, an alarm message will also be sent. 
    To stop the alarm sounding, simply disarm the system. 
    Memory of Alarm 
    When an alarm condition occurs, the keypad displays the number(s) of the 
    zone(s) that caused the problem, and displays the type of alarm (ex. FIRE, 
    ALARM). It remains displayed until it is cleared by disarming the system 
    (see DISARMING THE SYSTEM section).  
    						
    							 
     
    – 8 – 
    System Overview (cont’d) 
    Speed Key (Macros) 
    The system can store a string of up to 32 keystrokes, which can be activated 
    anytime by simply pressing the “A, B, C, or D” keys. This feature can be 
    used to make it easy to perform multiple functions at once (such as going to 
    another partition to bypass a zone), or it can be used to simplify an everyday, 
    repeated procedure. Refer to the SPEED KEY section for procedures for 
    using this feature. 
    Using Schedules 
    Your system may have been programmed with schedules for automatically 
    arming, disarming and activating various devices and/or performing other 
    system functions at predetermined times. Users can modify some of these 
    schedules by manually delaying a closing time, using temporary schedules, or 
    by programming special user schedules. Refer to the USING SCHEDULES 
    section at the end of this manual for scheduling related procedures. 
    Device Timers 
    The system provides up to 20 timers that can be used to control various 
    devices, such as lights or appliances. These timers are similar in concept to 
    the individual appliance timers that might be purchased at a department 
    store. The devices that can be controlled are programmed into the system by 
    the installer. Up to 96 of these devices can be programmed. Refer to the 
    PROGRAMMING DEVICE TIMERS section for procedures. 
    To Access Another Partition (GOTO Command) 
    Each keypad is assigned a default partition for display purposes, and will 
    show only that partition’s information. But, if the user is authorized, a 
    keypad in one partition can be used to perform system functions in another 
    partition, by using the GOTO command. Note that only those partitions 
    authorized and programmed by the installer can be accessed in this manner. 
    To GOTO another partition, enter your security code, then press [✳] followed 
    by the desired partition number. 
    The keypad will remain in the new partition until directed to go to another 
    partition, or until 120 seconds has elapsed with no keypad activity. Entering 
    your security code, pressing [✳] followed by [0] will return the keypad to its 
    original partition. 
      
    						
    							 
     
    – 9 – 
    System Overview (cont’d) 
    Master Keypad Operation 
    A Master keypad is one on which the status of all 8 partitions is displayed 
    simultaneously.  A user can get more information about a certain partition by 
    simply entering [✳] + the desired partition number.  To log on to the 
    Master partition (3 for the VISTA-32FB; 9 for the VISTA-128FB) using the 
    GOTO command, and to perform any functions at a Master keypad, a user 
    must have access to all partitions. 
    Self-Help Feature 
    Abbreviated user’s instructions are built into the system that can be easily 
    viewed on the alpha keypad’s message display screen. This feature will prove 
    particularly useful if this manual is not conveniently accessible when you 
    need to perform a system procedure with which you are not familiar.  
    To view the abbreviated instructions: 
    Simply press and hold down the function key of interest until the description 
    starts to appear (about 5 seconds) and then release it. The system must be 
    “READY TO ARM” to perform this function. 
    Refer to the FUNCTIONS OF THE KEYPAD section for descriptions of each 
    key function. 
    Phone Access & Voice Response Capability 
    Your system may include a 4285 or 4286 VIP module that will permit you to 
    access the system via a Touch-tone phone, either on-premises or by call-in 
    when away. The phone access feature will enable you to do the following: 
    • Receive synthesized voice messages over the telephone regarding the 
    status of the security system. 
    • Arm and disarm the system and perform most function commands via 
    the telephone, with voice confirmation provided after each command 
    entry. 
    • Control 4204/4204CF relays devices and lights and appliances through 
    the #70 Manual Relay Activation mode. 
    Complete information regarding the use of this feature is provided in a 
    separate manual entitled PHONE ACCESS USERS GUIDE, which 
    accompanies the 4285 or 4286 VIP module. 
      
    						
    							 
     
    – 10 – 
    About The Keypads 
    General 
    IMPORTANT: If the keypad beeps rapidly upon entering the 
    premises, it indicates that an alarm has occurred during your 
    absence. LEAVE IMMEDIATELY and CONTACT THE POLICE 
    from a safe location nearby. 
    Your keypads allow you to control all system functions. The keypads feature 
    a telephone style (digital) keypad and a Liquid Crystal Display (LCD) that 
    shows the nature and location of all occurrences. Keypad display back 
    lighting is programmable to always stay on or to light only when a key is 
    pressed, then turn off a few minutes later.  
    The keypads also feature a built-in sounder that will sound during alarms 
    and troubles. It will also beep during certain system functions, such as 
    during entry/exit delay times, during CHIME mode, and when depressing 
    keys to perform system functions (to acknowledge the key press). These 
    sounds can be optionally suppressed in some of your keypads (so as not to 
    disturb other users of the system). Ask your installer if this has been done. 
    The Alpha Keypad 
    Alpha keypads feature a 2-line, 32 character alphanumeric Liquid Crystal 
    Display (LCD) that can display system messages in user-friendly English. 
    Abbreviated user’s instructions can also be displayed (see Self Help 
    paragraph in the SYSTEM OVERVIEW section). These keypads can also be 
    programmed with custom zone descriptors.  
    						
    All NEC manuals Comments (0)

    Related Manuals for NEC L51w Led Projector Specifications