Home > NEC > Projector > NEC L51w Projector Users Manual

NEC L51w Projector Users Manual

    Download as PDF Print this page Share this page

    Have a look at the manual NEC L51w Projector Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							54English ...
    Appendices
    Cabinet Dimensions
    43.0/1.69226.0/8.90
    174.4/6.87
    57.5/2.26
    51.0/2.01
    23.4/0.92Lens Center
    Unit: mm/inch 
    						
    							55... English
    Appendices
    Pin Assignments of D-Sub COMPUTER Input 
    Connector
    Mini D-Sub 15 Pin Connector
    123 4 5
    11
    1213 14 15
    6 78 910
    Signal Level
    Video signal : 0.7Vp-p (Analog)
    Sync signal : TTL level
    Pin No.RGB Signal (Analog)YCbCr Signal
    1RedCr
    2GreenY
    3BlueCb
    4Ground
    5Ground
    6Red GroundCr Ground
    7Green GroY Ground
    8Blue GroundCb Ground
    9No Connection
    10Sync Signal Ground
    11No Connection
    12Bi-directional DATA (SDA)
    13Horizontal Sync
    14Vertical Sync
    15Data Clock 
    						
    							Power
       No power (POWER indicator does not light blue).      Power cable’s plug is fully inserted into the wall outlet.      No power even though you press and hold the POWER button for a minimum of 1 second.
       Shut down during operation.      Power cable’s plug is fully inserted into the wall outlet.     Power Management is turned off (only models with the Power Management function).
    Video and Audio
       No image is displayed from your PC or video equipment to the projector.      Still no image even though you connect the projector to the PC first, then start the PC.     Enabling your notebook PC’s signal output to the projector.   •   A combination of function keys will enable/disable the external display. Usually, the combination of the “Fn” key along with one of the 12 function keys turns the external display on or off.     No image (blue background).     Still no image even though you press the AUTO ADJ. but-ton.     Still no image even though you carry out [RESET] in the projector’s menu.     Signal cable’s plug is fully inserted into the input connector A message appears on the screen.   ( _____________________________________________ )     The source connected to the projector is active and avail-able.     Still no image even though you adjust the brightness and/or the contrast.     Input source’s resolution and frequency are supported by the projector.   Image is too dark.      Remains unchanged even though you adjust the brightness and/or the contrast.   Image is distorted.      Image appears to be trapezoidal (unchanged even though     you carry out the [KEYSTONE] adjustment).
       Parts of the image are lost.      Still unchanged even though you press the AUTO ADJ. button.     Still unchanged even though you carry out [RESET] in the projector’s menu.   Image is shifted in the vertical or horizontal direction.      Horizontal and vertical positions are correctly adjusted on a computer signal.     Input source’s resolution and frequency are supported by the projector.     Some pixels are lost.   Image is flickering.      Still unchanged even though you press the AUTO ADJ. button.     Still unchanged even though you carry out [RESET] in the projector’s menu.     Image shows flickering or color drift on a computer signal.   Image appears blurry or out of focus.      Still unchanged even though you checked the signal’s reso-lution on PC and changed it to projector’s native resolution.     Still unchanged even though you adjusted the focus.   No sound.      Audio cable is correctly connected to the audio input of the projector.     Still unchanged even though you adjusted the volume level.
    Other
       Remote control does not work.      No obstacles between the sensor of the projector and the remote control.     Projector is placed near a fluorescent light that can disturb the infrared remote controls.     Batteries are new and are not reversed in installation
       Buttons on the projector cabinet do not work.      [CONTROL PANEL LOCK] is not turned on in the menu.     Still unchanged even though you press and hold the SOURCE button on the cabinet for minimum of 10 seconds.
    Troubleshooting Check List
    Before contacting your dealer or service personnel, check the following list to be sure repairs are needed also by  referring to the “Troubleshooting” section in your user’s manual. This checklist below will help us solve your  problem more efficiently.* Print the following pages.
    Frequency of occurrence  always    sometimes (How often?_______________________)     other (__________________) 
    						
    							In the space below please describe your problem in detail.
    Information on application and environment where your projector is used
    Projector
    Model number:
    Serial No.:
    Date of purchase:
    Information on input signal:
    Horizontal synch frequency [ ] kHz
    Vertical synch frequency  [ ] Hz
    Synch polarity  H   (+)   (–)
     V   (+)   (–)
    Synch type  Separate   Composite
      Sync on Green
    STATUS Indicator:
    Steady light/Flashing light [ ] cycles
    Remote control model number:
    Installation environment
    Screen size:   inch
    Screen type:  White matte   Beads   Polarization
       Wide angle   High contrast
    Throw distance:  feet/inch/m
    Orientation:  Desktop  Other
    Power outlet connection:
      Connected directly to wall outlet
      Connected to power cord extender or other (the number of connected equipment______________)
      Connected to a power cord reel or other (the number of connected equipment______________)
    Computer
    Manufacturer:
    Model number:
    Notebook PC  / Desktop  
    Native resolution:
    Refresh rate:
    Video adapter:
    Other:
    Video equipment
    VCR, DVD player, Video camera, Video game or other
    Manufacturer:
    Model number:
    Signal cable
    NEC standard or other manufacturer’s cable?
    Model number:   Length:  inch/m
    Distribution amplifier
    Model number:
    Switcher
    Model number:
    Adapter
    Model number:
    Projector
    PC
    DVD Player 
    						
    							TravelCare Guide
    TravelCare - a service for international travelers
    This product is eligible for “TravelCare”, NEC’s unique international warranty and repair service.
    For more information on TravelCare service, visit our website (in English only).
    http://www.nec-display.com/dl/en/pj_support/travel_care.html
         
    						
    							REGISTER YOUR PROJECTOR! (for residents in 
    the United States, Canada, and Mexico)
    Please take time to register your new projector. This will activate your lim-
    ited parts and labor warranty and InstaCare service program.
    Visit our web site at www.necdisplay.com, click on support center/register 
    product and submit your completed form online.
    Upon receipt, we will send a confirmation letter with all the details you will 
    need to take advantage of fast, reliable warranty and service programs from 
    the industry leader, NEC Display Solutions of America, Inc. 
    						
    							© NEC Display Solutions, Ltd. 2012 7N951831  
    						
    All NEC manuals Comments (0)

    Related Manuals for NEC L51w Projector Users Manual