NEC Lt150 Micro-portable Projector Users Manual

EÐ38
Noise Reduction  (not available for RGB and PC Card Viewer)
You can select three levels video noise reduction.
NOTE: The lower the Noise Reduction level, the better the image quality by
way of higher video bandwidth.
Color Matrix  (available for component video signal only)
First select an appropriate color matrix to fit your component signal
for HDTV or SDTV. Then select an appropriate matrix type from B-
Y/R-Y, Cb/Cr or Pb/Pr.
White Balance
This allows you to adjust the white balance. Brightness...

EÐ39
Clock .......... Use this item to fine tune the computer image or to remove any
vertical banding that might appear. This function adjusts the clock
frequencies that eliminate the horizontal banding in the image.
Press the 
§ and © buttons until the banding disappears.
This adjustment may be necessary when you connect your com-
puter for the first time. This adjustment is made automatically when
the Auto Adjust is turned on.
Phase ......... Use this item to adjust the clock phase or to reduce video...

EÐ40
Allows you to set preferences for the on-screen menu.
Press ÒOKÓ to save your changes for all the features.
Menu Mode:
This feature allows you to select two menu modes: Advanced Menu
and Basic/Custom Menu.
Advanced Menu ........ This is the menu that contains all the available menus
and commands.
Basic/Custom  Menu . This is the menu that you can customize using the Basic/
Custom Menu Edit to fit your needs.
The factory default Basic/Custom menu includes:
Source Select (RGB, Video, S-Video and PC...

EÐ41
Mouse Settings:
This option lets you to change your USB mouse settings. The mouse
settings feature is available for USB mouse only. Choose the settings
you want:
Mouse Button ........... Right Hand or Left Hand
Mouse Sensitivity ..... Fast, Medium or Slow
[Page2]
PC Card Viewer Options
Show Folder List:
If this option is checked, when PC Card Viewer input is selected on
the projector, the folder lists will be displayed and allows you to se-
lect the presentation from a CompactFlash card.
Auto Play:...

EÐ42
Auto Start:
Turns the projector on automatically when the power cable is inserted
into an active power outlet. This eliminates the need to always use
the Power button on the optional remote control or projector cabi-
net.
Power Management:
When this option is on and there is no RGB input for five minutes or
more, the projector will automatically turn itself off.
Power Off Confirmation:
This option determines whether a confirmation dialog for turning off
the projector will appear or not.
NOTE: In...

EÐ43
Tools
Provides tools for capturing images, displaying files in a
CompactFlash Card and drawing.
NOTE: The Capture and PC Card Files features are required for a
CompactFlash card.
Capture:
Allows you to capture an image from a source that is currently being
displayed. The image is saved as JPEG in the CompactFlash card.
When you select Capture from the menu, you will get a tool bar. You
can capture an image directly using the tool bar when the menu is not
displayed.
The tool bar includes the...

EÐ44 Help
Contents:
Provides an online help about how to use the menus. An underlined
link means that you can move to an adjustment item directly.
Selecting the underlined link and pressing ENTER moves to the cor-
responding adjustment item.
Information:
Displays the status of the current signal, and the lamp and the projec-
tor usage hours.
This dialog box has four pages.
The information included are as follows:
[Page 1]
Source Name
Input Terminal
Horizontal Frequency
Vertical Frequency
Sync...

EÐ45
AC  IN
PC CARD
USB VIDEO
EOPC CONTROLCANCEL
AC  IN
PC CARD
USB VIDEO
ROL
PC
-C
ard
A
dapter
8M
B
Using the PC Card Viewer function
NOTE: When using the supplied software (CD-ROM)
The software is designed to use with a personal computer only. Do not play
the software on CD player. Doing so could cause damage to speakers.
Features
The Viewer feature allows slides stored on a CompactFlash  memory
card (referred to as CompactFlash card in this manual) to be dis-
played on the projector.  Even if no...

EÐ46
Installing the PC Card Viewer Software
Before Installing
Perform the following before installing the PC Card Viewer software:
¥ If Windows is already started, exit all applications.  Installation
may not be performed properly if any applications are running.
Installation
Install the viewer software as described below.
To quit installation before it is completed, press the Cancel button
then follow the instructions in the dialog box.
1. Start up Windows.
2. Insert the CD-ROM into the CD-ROM drive....

EÐ47
Drag
Prev
Next
PlaySetupJump
Delete
Select
A tool bar will appear when you press the MENU button on the re-
mote control or the projector cabinet or clicking with the right button
of a mouse.
Operating the PC Card Viewer Function from
the Projector (playback)
This section describes the operation for showing slides of presenta-
tion documents created using the PC Card Viewer function with the
projector.
It is also possible to make slides directly from the images projected
with the projector....