NEC Multisync Ex231w Users Manual

English
English-9
Flexible Arm Installation
This LCD monitor is designed for use with a flexible arm. To mount the monitor to a flexible arm:
1. Follow the instructions on how Remove Monitor Stand for Mounting to remo\
ve the stand.
2. Using 4 screws attach the arm to the monitor (Figure F.1).
NOTE: 1. The LCD monitor should only be used with an approved arm (e.g. GS mark)\
. To meet the safety requirements,
the monitor must be mounted to an arm, which ensures the necessary stabi\
lity under...

English-10
Menu
Detects the level of ambient lighting allowing the monitor to make adjus\
tments to various settings resulting in amore comfortable viewing experience. Do not cover this sensor.
Indicates that the power is on.
Turns the monitor ON and OFF.
Enters the OSD sub menu. Activates the select function.
Changes the Input source (No OSD condition).
Opens OSD main menu.
Exits the OSD controls.
Exits to the OSD main menu.
Moves the highlighted area left/right to select control menus.
Moves the bar...

English
English-11
Simple MENU
BRIGHTNESS
Adjusts the overall image and background screen brightness.
If ECO MODE is set to 1 or 2, a bar for CARBON FOOTPRINT will appear.
ECO MODE can be set by FULL MENU.
AUTO ADJUST (Analog input only)
Automatically adjusts the Image Position, Horizontal Size, Fine and Cont\
rast settings.
FULL MENU
Switch to FULL MENU. See page 11 for detailed information.
HUMAN SENSOR
Shows current human sensing setting. See page 12 for more details. This function is adjusted...

English-12
ECO MODE
Decreases the power consumption by reducing the brightness level.
OFF: Sets brightness variable from 0% to 100%.
(ECO MODE) 1:  Sets brightness variable range from 0% to 80%.
This setting can adjust brightness to a range in which power is reduced \
to meet Energy Star measurement
conditions.
(ECO MODE) 2:  Sets brightness variable range from 0% to 40%.
This setting can adjust brightness to a range in which power is reduced \
by 30% compared to the maximum
brightness setting.
When this...

English
English-13
Auto Adjust/Image Controls (Analog input only)
AUTO ADJUST
Automatically adjusts the Image Position, Horizontal Size and Fine setti\
ngs.
AUTO CONTRAST
Adjusts the image displayed to optimal settings.
LEFT / RIGHT
Controls Horizontal Image Position within the display area of the LCD.
DOWN / UP
Controls Vertical Image Position within the display area of the LCD.
H.SIZE
Adjusts the horizontal size by increasing or decreasing this setting.
FINE
Improves focus, clarity and image stability...

English-14
Menu Tools
LANGUAGE: OSD control menus are available in eight languages.
OSD TURN OFF:  The OSD control menu will stay on as long as it is in use. In the OSD Turn Off submenu, you can
select how long the monitor waits after the last touch of a button to sh\
ut off the OSD control menu.
OSD LOCK OUT:  This control completely locks out access to all OSD control functions wi\
thout Brightness and
Contrast. When attempting to activate OSD controls while in the Lock Out\
 mode, a screen will appear...

English
English-15
Specifications
Monitor SpecificationsMultiSync EX231WNotes
LCD ModuleDiagonal: 58.42 cm/23.0 inches Active matrix; thin film transistor (TFT) liquid
Viewable Image Size: 58.42 cm/23.0 inches crystal display (LCD); 0.265 mm dot pitch;
Native Resolution (Pixel Count): 1920 x 1080 250 cd/m
2 white luminance; 1000:1 contrast ratio,
typical (25000:1 Contrast ratio, Dynamic).
Input Signal
DVI: DVI-I Connector: Digital RGB DVI (HDCP) Analog RGB 0.7 Vp-p/75 ohm
Sync Separate sync.TTL level...

English-16
Features
Lightweight Design: The design of the display, including a remarkably thin bezel and minimal stand components, promot\
es
lightweight for easier portability and desktop maneuvering.
Human Sensor: Shifts to a lower power consumption level when a person leaves the monitor, saving your monitor energy costs.
Touch Key / Slide key:  Allows you to quickly and easily adjust all elements of your screen imag\
e by simply sliding your finger
over the icons on the monitor bezel.
Redesigned OSD...

English
English-17
Troubleshooting
No picture• The signal cable should be completely connected to the display card/comp\
uter.
• The monitor does not support DisplayPort converter signal.
• The display card should be completely seated in its slot.
• Front Power Switch and computer power switch should be in the ON positio\
n.
• Check to make sure that a supported mode has been selected on the displa\
y card or system being used.(Please consult display card or system manual to change graphics mode.)\
•...

English-18
Using the Auto Brightness function
The brightness of the LCD screen can be set to increase or decrease depe\
nding on the amount of ambient light within the
room. If the room is bright, the monitor becomes correspondingly bright.\
 If the room is dim, then the monitor will dim
accordingly. The purpose of this function is to make the viewing experience more comf\
ortable to the eye in a variety of lighting
conditions.
The Auto Brightness function is set to 1 by default.
SETUP
Use the following...