NEC Multisync Lcd5710 Users Manual

English-29
English
3. Reducing the environmental temperature is effective for long life use.
When Protection board (glass, acryl) is installed over the LCD surface, enclosed into the box / wall, or stack the monitor, please utilize the
temperature sensors inside monitor.
To reduce the environmental temperature, the monitor should be set Low Brightness or Cooling Fan ON by using Screen sever Function.
4. Please use Screen Saver Mode of monitor.
NOTE 2: MONITOR ID and IR CONTROL
Using the one PC or one...

English-30
Controlling the LCD monitor via RS-232C Remote Control
This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal.
Functions that can be controlled by a personal computer are:
•Power ON or OFF
•Switching between input signals
Connection
LCD Monitor + PC
NOTE:If your PC (IBM or IBM compatible) is equipped only with a 25-pin serial port connector, a 25-pin serial port adapter is
required. Contact your dealer for details.
* RS-232C OUT terminal can connect...

English-31
English
3) Control sequence
(1) The command from a computer to the LCD monitor will be sent in 400ms.
(2) The LCD monitor will send a return command 400ms* after it has received and encoded. If the command isn’t
received correctly, the LCD monitor will not send the return command.
(3) The personal computer checks the command and confirms if the command, which has been sent, has been executed or not.
(4) This LCD monitor sends various codes other than return code. When having a control sequence...

English-32
Features
Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight
limitations.
Colour Control Systems: Allows you to adjust the colours on your screen and customize the colour accuracy of your monitor
to a variety of standards.
OmniColor: Combines Six-axis colour control and the sRGB standard. Six-axis colour control permits colour adjustments via
six axes (R, G, B, C, M and Y) rather than through the three axes (R, G and B)...

English-33
English
Troubleshooting
No picture
•The signal cable should be completely connected to the display card/computer.
•The display card should be completely seated in its slot.
•Front Power Switch and computer power switch should be in the ON position.
•Check to make sure that a supported mode has been selected on the display card or system being used.
(Please consult display card or system manual to change graphics mode.)
•Check the monitor and your display card with respect to compatibility and...

English-34
Specifications
Product SpecificationsAnalog Input Digital Input
LCD Module 57 /145.0cm diagonal
Pixel Pitch: 0.6525mm
Resolution: 1920 x 1080 dots
Colour: Over 16 million colours (depending on video card used)
Brightness: 450cd/m
2 (Typ.)
Contrast Ratio: 900:1
Viewing Angle: Up 89°/ Down 89°/ Left 89°/ Right 89° (typ) @ CR>10
Design View Distance: 1500mm
Frequency Horizontal: 15.625/15.734kHz, 31.5kHz - 91.1kHz 31.5kHz - 91.1kHz
Vertical: 50.0/58.0 - 85.0 Hz 50.0/58.0 - 85.0 Hz
Pixel Clock...

English-35
English
Mounting on Wall or Ceiling
DO NOT mount the monitor yourself. Please ask dealer.
For proper installation it is strongly recommended you use a trained, qualified technician.
Please inspect the location where the unit is to be mounted. Not all walls or ceilings are capable of supporting the weight of
the unit.
Product warranty does not cover damage caused by improper installation, remodeling, or natural disasters. Failure to follow
these recommendations could result in voiding the...

English-36
Pin Assignment
1) Analog RGB input (MiniDsub15p): R G B 2
Pin No Name
1Video Signal Red
2Video Signal Green
3Video Signal Blue
4GND
5DDC-GND
6Red-GND
7Green-GND
8Blue-GND
9+5V (DDC)
10 SYNC-GND
11 GND
12DDC-SDA
13 H-SYNC
14V-SYNC
15 DDC-SCL
2) S-VIDEO input: V I D E O
Pin No Name
1GND
2GND
3Y (Luminance)
4C (Chroma)
3) Digital RGB input (DVI-D): R G B 1
4) RS-232C input/output
Pin No Name
1NC
2RXD
3TXD
4NC
5GND
6NC
7RTS
8CTS
9NC
Pin - Assignment of DVI connector:
1TX2- 9 TX1- 17 TX0-
2TX2+ 10...