NEC Multisync Pa241w Users Manual

MultiSync PA231W
MultiSync PA241W
MultiSync PA271W
MultiSync PA301W
User’s Manual
 

Index
Warning, Caution ........................................................................\
..................................................English-1
Declaration ............................................................\
....................................................... ................English-1
Canadian Department of Communications Compliance Statement .............................................English-2
Declaration of Conformity...

English-1
English
WARNING
CAUTION
CAUTION:   TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT 
THE POWER CORD FROM THE AC OUTLET.DO NOT REMOVE COVER (OR BACK). NO USER 
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
  This symbol warns user that uninsulated voltage within the unit may have\
 suf cient magnitude to cause   electric shock. Therefore, it is dangerous to make any...

English-2
Canadian Department of Communications 
Compliance Statement
DOC: This Class B digital apparatus meets all requirements of the Canadian In\
terference-Causing Equipment Regulations.
C-UL:  Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to\
 CAN/CSA C22.2 No. 60950-1.
FCC Information
1.   Use the attached speci ed cables with the MultiSync PA231W/MultiSync PA241W/MultiSync PA271W/MultiSync    
  PA301W color monitor so as not to interfere with radio and...

English-3
English
Product Features
 DisplayPort, which supports 10-bit color depth.
 5-setting, easy-to-switch picture mode (see page 11).
 Accurate color reproduction for high-end graphic design (see page 15).\
 Quick warmup time (for PA241W/PA271W/PA301W).
 Picture-in-picture/picture-by-picture dual-screen mode includes real-tim\
e preview (see page 12).
 USB hub with two upstream ports (see page 12).
 MultiPro ler extends color management feature, including automatic ICC pro le updates (ICC pro le...

English-4
Quick Start
To connect the LCD monitor to your system, follow these instructions:
NOTE:  Make sure to read “Recommended Use” (page 24) before installatio\
n.
In order to display the maximum resolution, a video card that can output\
 a resolution of 2560 x 1440 (PA271W) or 
2560 x 1600 (PA301W) is needed.
PA301W only: The monitor must be installed or carried by two or more people.
1.  Turn off the power to your computer.
2.  For a PC or MAC with DVI digital output:  Connect the DVI signal cable...

English-5
English
4.  Connect all cables to the appropriate connectors (Figure C.1). When using the USB cable, connect the B type connector 
to the USB upstream port on the right back side of the monitor and the A type connector to the downstream port on the 
computer ( Figure C.1a ). If using the cord from a USB device, plug into one of the downstream\
 ports of the monitor.  
NOTE:  Incorrect cable connections may result in irregular operation, damage di\
splay quality/components of LCD module 
and/or...

English-6
7.  Slide down the cable cover (
Figure D.1). 
8.  Connect one end of the power cord to the AC inlet on the back of the monitor and the other end to the power outle\
t.
NOTE:   Please refer to Caution section of this manual for proper selection of AC power cord.
Figure D.1
9.  Turn on the monitor with the front power button ( Figure E.1) and the computer.
10.  Only for PA231W/PA241W:  No-touch auto adjust automatically adjusts the monitor to optimal setti\
ngs upon initial setup for 
most...

English-7
English
Screen Rotation
Before rotating, the screen must be raised to the highest level and tilt\
 to avoid knocking the screen on the desk or pinching your 
 ngers. Disconnect all cables.
To raise the screen, place hands on each side of the monitor and lift up \
to the highest position ( Figure RL.1).
To rotate screen, place hands on each side of the monitor screen and turn\
 clockwise from Landscape to Portrait or counter-
clockwise from Portrait to Landscape ( Figure R.1).
To rotate OSD...

English-8
Figure S.1
100 mm100 mm
Figure F.1
Weight of LCD assembly:  7.0 kg (PA231W)
  7.4 kg (PA241W)
  9.6 kg (PA271W)
  12.5 kg (PA301W)
Mount Flexible arm
This LCD monitor is designed for use with a  exible arm.
1.  Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand.
2.  Using the 4 screws from the stand removal and attach the arm to  the monitor ( Figure F.1).
Caution:  Use ONLY the screws (4 pcs) that are included or the 
screws M4 size (Length: thickness of...