NEC MultiSync V462 V651 LCD Television User Manual

User’s Manual
MultiSync V462
MultiSync V651
  (For use in landscape position only)  

Index
DECLARATION OF CONFORMITY ........................................................................\
..................................... English-1
Important Information ........................................................................\
................................. .......................... English-2
WARNING  ........................................................................\
....................................................... ........ English-2
CAUTION...

English-1
English
DECLARATION OF CONFORMITY
This device complies with Part 15 of FCC Rules. Operation is subject to \
the following two conditions. (1) This device may not 
cause harmful interference, and (2) this device must accept any interf\
erence received, including interference that may cause 
undesired operation.U.S. Responsible Party:  NEC Display Solutions of America, Inc.
Address:    500 Park Boulevard, Suite 1100
    Itasca, Illinois 60143
Tel. No.:   (630) 467-3000
Type of Product:  Display...

English-2
Important Information
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT 
USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE 
PRONGS CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. 
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING
CAUTION:   TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE...

English-3
EnglishFOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING  THE MULTI-FUNCTION MONITOR:
 DO NOT OPEN THE MONITOR . There are no user 
serviceable parts inside and opening or removing covers may 
expose you to dangerous shock hazards or other risks. Refer 
all servicing to quali ed service personnel.
 Do not spill any liquids into the cabinet or use your monitor  near water.
 Do not insert objects of any kind into the cabinet slots,  as they may touch dangerous voltage...

English-4
Contents
Your new MultiSync monitor box* should contain the following:


1
 Video Signal Cable
 Wireless Remote Control and AA Batteries
 Clamp x 2*
2
 Screw (M4 x 10) x 2*2

 Thumbscrew for optional stand x 2*
2
 Eyebolt x 2*3
Power Cord*1
Setup Manual Clamp x 2*
2
Complete 
Users Manual
Information Files for  Windows Screw (M4 x 10) x 2*
2Thumbscrew for
optional stand x 2*2
Setup Manual
Video Signal Cable 
(Mini D-SUB 15 pin to  Mini D-SUB 15 pin)
Wireless Remote Control and AA  Batteries...

English-5
EnglishThis device cannot be used or installed without the Tabletop 
Stand or other mounting accessory for support. For proper 
installation it is strongly recommended to use a trained, 
NEC authorized service person. Failure to follow NEC 
standard mounting procedures could result in damage to the 
equipment or injury to the user or installer. Product warranty 
does not cover damage caused by improper installation. 
Failure to follow these recommendations could result in 
voiding the...

English-6
Mounting on ceiling 
 Ensure that the ceiling is sturdy enough to support the weight of the unit and the mounting apparatus over time, 
against earthquakes, unexpected vibrations, and other 
external forces.
 Be sure the unit is mounted to a solid structure within the  ceiling, such as a support beam. Secure the monitor using 
bolts, spring lock washers, washer and nut.
 DO NOT mount to areas that have no supporting internal  structure. DO NOT use wood screws or anchor screws for 
mounting. DO...

English-7
English
3. Installing and removing optional table top stand
CAUTION:   Installing and removing the stand must be done 
by two or more people for V462, by four or more 
people for V651.
To install, follow those instructions included with the stand or 
mounting apparatus. Use only those devices recommended 
by the manufacturer.
NOTE:  Use ONLY thumbscrews which are included in the 
monitor. For V651, use ONLY the thumbscrews 
which are included with the optional table top 
stand.
When installing...

English-8
Parts Name and Functions
Control Panel
 POWER button
Switches the power on/off. See also page 17.
 MUTE button
Switches the audio mute ON/OFF.
 INPUT button
Acts as SET button within OSD menu. (Toggle switches 
between [DVI], [DPORT], [VGA], [RGB/HV], [HDMI], 
[DVD/HD], [SCART], [VIDEO1], [VIDEO2] or [S-VIDEO]). 
These are available input only, shown as their factory preset 
name.
 PLUS button 
Acts as (+) button to increase the adjustment with OSD menu.
Increases the audio output level...