NEC Multisync X461hb Users Manual

English-29
EnglishThis LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal.
NOTE:When you use this function, EXTERNAL CONTROL should be “RS-232C”.
When you use this function, STANDBY MODE should be “STANDBY”.
Functions that can be controlled by a personal computer are:
•Power ON or OFF
•Switching between input signals
Connection
LCD Monitor + PC
NOTE:If your PC is equipped only with a 25-pin serial port connector, a 25-pin serial port adapter is required. Contact your...

English-30
Connecting to a Network
Using a LAN cable allows you to specify the Network Settings and the Alert Mail Settings by using an HTTP server function.
NOTE:When you use this function, EXTERNAL CONTROL should be “LAN”.
When you use this function, STANDBY MODE should be “STANDBY”.
To use a LAN connection, you are required to assign an IP address.
Example of LAN connection:
Controlling the LCD monitor via LAN Control
Server
HubNOTE: Use a category 5 or higher LAN cable.
LAN cable
(not supplied)...

English-31
English
Preparation Before Use
Connect the monitor to a commercially available LAN cable before engaging in browser operations.
Operation with a browser that uses a proxy server may not be possible depending on the type of proxy server and the setting
method. Although the type of proxy server will be a factor, it is possible that items that have actually been set will not be
displayed depending on the effectiveness of the cache, and the contents set from the browser may not be reflected in...

English-32
Alert Mail Setting
http:///lanconfig.html
Type in the hostname of the network connected to the monitor.
Up to 60 alphanumeric characters can be used.
Type in the domain name of the network connected to the monitor.
Up to 60 alphanumeric characters can be used.
Checking [ENABLE] will turn on the Alert Mail feature.
Checking [DISABLE] will turn off the Alert Mail feature.
Type in the senders address. Up to 60 alphanumeric and symbols characters can be used.
Type in the SMTP server name to be...

English-33
EnglishReduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight
limitations.
Color Control Systems: Allows you to adjust the colors on your screen and customize the color accuracy of your monitor to
a variety of standards.
OmniColor: Combines Six-axis color control and the sRGB standard. Six-axis color control permits color adjustments via six
axes (R, G, B, C, M and Y) rather than through the three axes (R, G and B) previously...

English-34 No picture
•The signal cable should be completely connected to the
display card/computer.
•The display card should be completely seated in its slot.
•Front Power Switch and computer power switch should
be in the ON position.
•Check to make sure that a supported mode has been
selected on the display card or system being used.
(Please consult display card or system manual to
change graphics mode.)
•Check the monitor and your display card with respect to
compatibility and recommended settings....

English-35
English
Specifications
Product Specifications
LCD Module 46 /116.8 cm diagonal
Pixel Pitch: 0.746 mm
Resolution: 1366 x 768 dots
Color: Over 16 million colors (depending on video card used)
Brightness: 1500 cd/m
2 (Max.), 1200 cd/m2 (Typ.) @25°C
Contrast Ratio: 3500:1 (Typ.)
Viewing Angle: 89° (typ) @ CR>10
Design View Distance: 1300 mm
Frequency Horizontal: 15.625/15.734 kHz, 31.5 kHz - 91.1 kHz (Analog Input)
31.5 kHz - 91.1 kHz (Digital Input)
Vertical: 50.0 - 85.0 Hz
Pixel Clock 25.2 MHz -...

English-36 1) Analog RGB input (MiniDsub15p): VGA
Pin No Name
1Video Signal Red
2Video Signal Green
3Video Signal Blue
4GND
5DDC-GND
6Red-GND
7Green-GND
8Blue-GND
2) S-VIDEO input: VIDEO
Pin No Name
1GND
2GND
3Y (Luminance)
4C (Chroma)
3) Digital RGB input (DVI-D): DVI
4) RS-232C input/output
Pin No Name
1connected to 7&8
2RXD
3TXD
4connected to 6
5GND
6connected to 4
7connected to 1&8
8connected to 1&7
9NC
Pin - Assignment of DVI connector:
1TX2- 9 TX1- 17 TX0-
2TX2+ 10 TX1+ 18 TX0+
3Shield (TX2 / TX4)...

English-37
EnglishNEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s
top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-
friendly products, and always strive to help define and comply with the latest independent standards from agencies such as
ISO (International Organisation for Standardization) and TCO (Swedish Trades Union).
Disposing of your old NEC product
The aim of...