Home > NEC > Telephone > NEC Ncs Telephone Quick Reference User Guide

NEC Ncs Telephone Quick Reference User Guide

Add to Favourites
    Download as PDF

    View the NEC Ncs Telephone Quick Reference User Guide for free. All the NEC manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 NCS Feature Phone Quick Reference User Guide Part No. 85480QRC02 April 2001Printed in U.S.A. (2106) Quick Reference for Other Features Data Port: Located on the right side of the phone, you can connect any standard telephone device to the phone (computer modem, answering machine, fax machine, etc.). Time/Date: Not user programmable. The information is initially received from the Caller ID information. The telephone will then maintain the correcttime/date. Tone/Pulse:Set the Tone/Pulse switch located on...
    Page 2 Quick Reference for Programmed Speed Dial Keys Handsfree: Press SPEAKER+ HANDSFREEto activate Intercom Handsfree Mode. Deactivate by pressing SPEAKER. Status: Lift the handset + Press the STATUSkey to have the sys- tem announce any active telephone features. In addition, dial tone will change when DND, Call Forwarding, Remote Call Forwarding, Handsfree Mode, Dial Tone Mute Mode, Outside Call Blocking, and Operator Offline features are active. Call Forward: Lift the handset + Press the CALL FORWARDkey +...
    Page 3 Turn Off Your Telephone’s Mic So Your Caller Can’t Hear Your Voice. . . 1. While on a call, press MUTE. The caller will not hear your voice and the MUTE key will light to show that the feature is activated. To deactivate, press MUTEagain.Redial Your Last Number . . . 1. Lift the handset. 2. Press REDIAL. The last number dialed called.Speed Dial Keys . . . The NCS Feature Phone has 20 one-touch speed dial bins that are used for dialing fre- quently used numbers. Each speed dial bin can store up to 15...
    Page 4 Using Callback . . . Enter the area code into storage to properly use this feature. This allows the phone to recognize your local area code and remove it from the dialed number. 1. Press UPor DOWNto activate the stored memory. The LCD screen will display TOP OF LIST or BOTTOM OF LIST. 2. Scroll to the desired number in memory using UPor DOWN. 3. Press CALL BACKto dial the displayed number. The number will appear on the screen as it is dialed. A LINE ERROR message indicates that there was a line error...
    Start reading NEC Ncs Telephone Quick Reference User Guide

    Related Manuals for NEC Ncs Telephone Quick Reference User Guide

    All NEC manuals