NEC Neax 2000 Ivs2 Isdn Features And Specifications

CALLED PARTY RECOGNITION SERVICE (DIRECT-IN TERMINATION (DIT))
NEAX2000 IVS2ISDN Features and SpecificationsPage 2NDA-24273, Issue 1.0
CALLED PARTY RECOGNITION SERVICE
(DIRECT-IN TERMINATION (DIT))
General Description
This feature provides an incoming Direct-In Termination (DIT) call via an ISDN trunk to be connected to a pre-
determined station. This application can be used for a station or modem.
Operating Procedure
No manual operation is required.
Station Application
All stations.
Service Conditions...

CPN TO NETWORK–PRESENT
NEAX2000 IVS2ISDN Features and Specifications
NDA-24273, Issue 1.0Page 3
CPN TO NETWORK–PRESENT
General Description
This feature allows the ISDN network to be informed of the Calling Party Number (CPN) when a call originates
from a terminal connected to the System.
For this example, the CPN sent to the network may be
214-555-5000 for every station in the PBX, or each
station may present a unique extension number (last
four digits) to the ISDN network.
Operating Procedure
No manual...

CPN TO TERMINATING USER–DISPLAY
NEAX2000 IVS2ISDN Features and SpecificationsPage 4NDA-24273, Issue 1.0
CPN TO TERMINATING USER–DISPLAY
General Description
This feature provides a visual display of the originating station’s number and subaddress information on a
Multiline Terminal for incoming ISDN calls. This provides the terminal user with a quick and accurate way to
identify the originating station’s number (Calling Number).
Operating Procedure
No manual operation is required. The originating station...

DID ADDRESSING
NEAX2000 IVS2ISDN Features and Specifications
NDA-24273, Issue 1.0Page 5
DID ADDRESSING
General Description
This feature allows incoming ISDN-PRI calls to terminate to stations, ATTCON, Automated Attendant, etc.,
based on the Called Party number. Direct Inward Dial trunks will be terminated to preprogrammed destinations
without Attendant assistance.
Operating Procedure
No manual operation is required.
Station Application
Not applicable.
Service Conditions
1. If the network is notified that...

DID AND DOD ADDRESSING
NEAX2000 IVS2ISDN Features and SpecificationsPage 6NDA-24273, Issue 1.0
DID AND DOD ADDRESSING
General Description
This feature allows the system to use DID and DOD on the same B channels. Trunk Provisioning Service
Selection is not required. (B-channels can be used for DID and DOD withoutseparating the trunk routes.)
Operating Procedure
No manual operation is required.
Service Conditions
1. Confirm the DID and DOD selection with the customer’s local exchange carrier prior to...

EVENT BASED CCIS
NEAX2000 IVS2ISDN Features and Specifications
NDA-24273, Issue 1.0Page 7
EVENT BASED CCIS
General Description
This feature allows a PBX customer that does not have a tie line (or when a customer can not use the tie line due
to the busy or fault of the line), to use the various CCIS feature by using the ISDN line as a CCIS virtual tie line,
on the 2400 IMX - NEAX2000 IVS
2connection or the NEAX2000 IVS2- NEAX2000 IVS2connection.
Operating Procedure
No manual operation is required.
Service...

EVENT BASED CCIS
NEAX2000 IVS2ISDN Features and SpecificationsPage 8NDA-24273, Issue 1.0
Table 1 CCIS Features Available with Event Based CCIS
SERVICE FEATURE AVAILABILITY REMARKS
Attendant Camp-On with Tone Indication-CCISX
Attendant Controlled Conference-CCISXNote 4
Brokerage-Hot-Line-CCISX
Busy Verification-CCISX
Call Back-CCISX
Call Forwarding-All Calls-CCISX
Call Forwarding-Busy Line-CCISX
Call Forwarding-Don’t Answer-CCISX
Call Forwarding-Intercept-CCISX
Call Forwarding-Override-CCISX
Calling Name...

EVENT BASED CCIS
NEAX2000 IVS2ISDN Features and Specifications
NDA-24273, Issue 1.0Page 9
Note 1:The voice channel and thecommon signalingchannel stay connected after the calls finish according to
the release timer data. Therefore, while the CCIS link is active, the features are available.
Note 2:The billing information is sent while the CCH link is active. If the sending of billing information fails, it
is sent again when a new CCH link is established by next call.
Note 3:As a remote office, this...

ISDN TERMINAL
NEAX2000 IVS2ISDN Features and SpecificationsPage 10NDA-24273, Issue 1.0
ISDN TERMINAL
General Description
This feature provides the system with an ISDN Terminal or Terminal Adapter (TA). ISDN Terminal to ISDN
Terminal, ISDN Terminal to ISDN Trunk, ISDN Trunk to ISDN Terminal, ISDN Terminal to Single Line
Telephone, ISDN Terminal to Multiline Terminal, and ISDN Terminal to PS connections are available.
Operating Procedure
No manual operation is required.
Service Conditions
1. The ISDN Line...

ISDN TERMINAL
NEAX2000 IVS2ISDN Features and Specifications
NDA-24273, Issue 1.0Page 11
6. During communication via the CCIS network, the link reconnection is notavailable.
7. The conditions about station services are as follows:
 Station Hunting
When a Single Line Telephone/Multiline Terminal or an ISDN Terminal calls a busy Single Line
Telephone/Multiline Terminal, another Single Line Telephone/Multiline Terminal in Station Hunting
group is called.
When a Single Line Telephone/Multiline Terminal or an...