NEC Neax 2400 Ipx System Operations And Maintenance Manual

NDA-24307 CHAPTER 6
Page 463
Issue 1
SYSTEM OPERATIONS
6. LINE MANAGEMENT
The following explanations apply to line management:
Make-Busy/Make-Busy Cancel of Station and Data Terminal
Class Change and Number Change of Station and Data Terminal
Make-Busy/Make-Busy Cancel of C.O. Line/Tie Line
6.1 Make-Busy/Make-Busy Cancel of Station and Data Terminal
Stations can be put into make-busy state by the following operations:
(1) On each station basis using the MBST command.
Assign the station number in the...

CHAPTER 6 NDA-24307
Page 464
Issue 1
SYSTEM OPERATIONS
6.2 Class Change and Number Change of Station and Data Terminal
Figure 6-12 shows the procedure for class change and number change of station and data terminal.
Figure 6-12   Class Change and Number Change of Station and Data Terminal Procedure
6.3 Make-Busy/Make-Busy Cancel of C.O. Line/Tie Line
Figure 6-13 shows the procedure to make-busy/make-busy cancel of C.O. line/tie line.
Figure 6-13   Make-Busy/Make-Busy Cancel of C.O. Line/Tie Line...

NDA-24307 CHAPTER 6
Page 465
Issue 1
SYSTEM OPERATIONS
6.4 Line Management Commands
COMMAND COMMAND FULL NAME
AGCL Assignment of Guest Station Class
AGSN Assignment of Alternated Guest Station Number
ASCL Assignment of Station Class Data
ASTN Assignment of Station Number
ALGNN Assignment of Telephone Number Data for NDM
ALGSN Allocation of Telephone Number Data for NDM
MBLE Make Busy of LENS
MBPM Make Busy of Port Microprocessor
MBRT Make Busy of Route
MBST Make Busy of Station
MBTK Make Busy of Trunk...

CHAPTER 6 NDA-24307
Page 466
Issue 1
SYSTEM OPERATIONS
7. STATION MESSAGE DETAIL RECORDING SYSTEM (SMDR)
Billing information can be managed by connecting the PBX system and an external computer (SMDR
equipment).
Note:The SMDR equipment and its software must be provided by the user.
The PBX system provides the SMDR equipment with the following information:
Calling Party Information
Called Party Number
Call Start Time
Call End Time
Authorization Code/Account Code
Upon receiving the above information...

NDA-24307 CHAPTER 6
Page 467
Issue 1
SYSTEM OPERATIONS
(3) Text Format
Text formats can be selected by system data. For information on data assigment for SMDR, refer to the
“Feature Programming Manual.” Text formats used in the system are as follows:
IPX format: This format used for both IOC and TCP/IP interface. Refer to Section 7.2
ICS format: This format used for IOC interface. Refer to Section 7.3.
For detailed information on SMDR TCP/IP interface, refer to Section 7.4.9.
Table 6-3  ASCII Code...

CHAPTER 6 NDA-24307
Page 468
Issue 1
SYSTEM OPERATIONS
7.2 IPX Format (Text Format of Centralized Billing - Fusion)
Below is the IPX format of billing information to be transmitted to the SMDR equipment. Figure 6-14
shows the transmission message of an outgoing call. Figure 6-15 shows the transmission message of an
incoming call. Also, Figure 6-16 shows the transmission message of a station-to-station call.
STX  : Start of Text ETX : End of Text
KK : Outgoing KL : Incoming
KM : Extension
S
T
XE
T
X...

NDA-24307 CHAPTER 6
Page 469
Issue 1
SYSTEM OPERATIONS
Note:
Conditionally Provided: Information is provided when data is effective.
Provided: Information is provided on every call with no exception. 
-: Not available.
Table 6-4  Kind of Data
KIND 
OF 
DATACONTENTSKK
(OUTGOING)KL
(INCOMING)KM
(STATION)
00 Not Used
01 Outgoing Trunk/Incoming Trunk Information Provided Provided -
02 Calling Party Information (Station Number) Provided - Provided
03 Calling Party Information (Telephone Number) Conditionally...

CHAPTER 6 NDA-24307
Page 470
Issue 1
SYSTEM OPERATIONS
 
Figure 6-14   Message Format for Outgoing Call - IPX Format
Byte Data
1
105
15
25 20
30
40 35
45
55 50
60
65
STX
0
!
K
K
0
1
1
FPC
(3 digits)
Physical 
Route No.
Tr u n k  N o .
Logical 
Route No.
0
2
1
ORIG
Tenant
(3 digits)
STN No. 
ATT CON 
No. 
RT/TK No.
(6 digits)
0
3
02
FPC
(3 digits)
User 
Group 
Number
Telephone 
Number 
(Max. 16 
digits)
/
Logical 
Route No. 
(3 digits)
0
6
3
Year
Byte Data
80 75
85
95 90
100
110 105
115
125 120
130
135...

NDA-24307 CHAPTER 6
Page 471
Issue 1
SYSTEM OPERATIONS
Figure 6-15   Message Format for Incoming Call - IPX Format
Office Code 
of Billing 
Process 
Office
Byte Data
1
105
15
25 20
30
40 35
45
55 50
60
65STX
0
!
K
L
0
1
1
2
FPC
(3 digits)
Physical 
Route No.
Trunk No.
Logical 
Route No.
0
4
1
0
ORIG
Tenant
(3 digits)
STN No. 
ATT CON 
No. 
RT/TK No.
(6 digits)
0
5
02
32
FPC
(3 digits)
User Group 
Number
(3 digits)
Telephone 
Number 
(Max. 16 
digits)
/
Logical 
Route No. 
(3 digits)
0
6
3
4
Year
Byte...

CHAPTER 6 NDA-24307
Page 472
Issue 1
SYSTEM OPERATIONS
 
Figure 6-16   Message Format for Station-to-Station Call - IPX Format
Byte Data
1
105
15
25 20
30
40 35
45
55 50
60
65STX
0
!
K
M
0
2
1
0
FPC
(3 digits)ORIG
Tenant
(3 digits)
STN No. 
ATT CON 
No. 
(6 digits)
0
5
02
32
FPC
(3 digits)
User Group 
Number
(3 digits)
Telephone 
Number 
(Max. 16 
digits)
Byte Data
70
80 75
85
95 90
100
110 105
115
125 120
130
Milli-Second
0
6
Account 
Code
(Max. 16 
digits)
Calling
Par ty
Information
(Station No.)
Note...