NEC Plasmasync 61mp1 Users Manual

PlasmaSync 61MP1  Users Manual
Printed in Japan
7S800271
Printed on recycled paper
PlasmaSync Plasma Monitor
Users Manual
Bedienungshandbuch
Manuel de lutilisateur
Manual del Usuario
Manuale duso
Bruksanvisning
 

User’s Manual
Bedienungshandbuch
Manuel de l’utilisateur
Manual del Usuario
Manuale d’uso
Bruksanvisning
 

Precautions
Please read this manual carefully before using your NEC
plasma monitor and keep the manual handy for future
reference.
       CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER. NO
USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
This symbol warns the user that uninsulated
voltage within the unit may have sufficient
magnitude to cause electric shock.
Therefore, it is dangerous to make any kind
of contact...

NOTE:
When you connect a computer to this monitor, attach
the supplied ferrite cores. If you do not do this, this
monitor will not comform to mandatory CE or C-Tick
standards.
Attaching the ferrite cores:
Set the ferrite cores on both ends of the DVI cable (not
supplied), and both ends of the power cable (supplied).
Close the lid tightly until the clamps click.
Use the band to fasten the ferrite core (supplied) to the
DVI cable.
DVI cable (not supplied)
core (small)
core (small)Connector
band
band
Power...

How to Attach Options to the Plasma Monitor .. E-1
Introduction................................................... E-2
Introduction to the PlasmaSync 61MP1
Plasma Monitor..................................................... E-2
The features you’ll enjoy include:............................. E-2
Contents of the Package......................................... E-2
Options............................................................... E-2
Part Names and Function................................ E-3
Front...

E-1
You can attach your optional mounts or stand to the plasma
monitor in the following way:
* Unpack the plasma monitor. (See Drawing A.)
* Take it out, put your hand in the handy-grip recess at the
rear, and move it to an appropriate place. Then attach the
optional mounts or stand. (See Drawing B.)
• This device cannot be installed on its own.
Be sure to use a stand or original mounting
unit. (Wall mount unit, Stand, etc.)
* See page E-2.
• For correct installation and mounting it is
strongly...

E-2
Introduction to the PlasmaSync
61MP1 Plasma Monitor
NEC’s PlasmaSync is a seamless blend of cutting-edge
visual technology and sophisticated design. At 61-inches,
with a 16:9 aspect ratio, the PlasmaSync 61MP1 certainly
makes a big impression. However, at a mere 4.7 inches/
119 mm thin, the monitor’s sleek techno-art lines blend in
well with your environment. PlasmaSync’s crisp, vivid
image quality will transform data from any graphic
medium from PCs to DVD players- into art. And weighing
only 134.5...

E-3
Front View
tPower
Turns the monitor’s power on and off.
yPOWER/STANDBY indicator
When the power is on ............................. Lights green.
When the power is in the standby mode ... Lights red.
uRemote sensor window
Receives the signals from the remote control.
Part Names and Function
qPROCEED
Sets the On-Screen Menu (OSM) mode and displays
the main menu.
wVOLUME DOWN and UP
Adjusts the volume. Functions as the CURSOR (
/
) buttons in the On-Screen Menu (OSM) mode.
eLEFT/– and RIGHT/+
Enlarges...

E-4
Rear View/ Terminal Board
AAC IN
Connect the included power cord here.
BEXT SPEAKER L and R
Connect speakers here. Maintain the correct polarity.
CEXTERNAL CONTROL
This terminal is used when power ON/OFF, input
selection and AUDIO MUTE and other controls are
operated externally (by external control). See also page
E-39 for external control.
DREMOTE CONTROL
Connect the supplied remote cable here.
ECONTROL LOCK
When “CONTROL LOCK” is set “ON”, the buttons
on the set’s control panel do not function....

E-5
Remote Control
q POWER ON/OFF
Switches Power ON/OFF.
(This does not operate when POWER/STANDBY
indicator of the main unit is off.)w RGB/PC
Press this button to select RGB/PC as the source.
→ RGB/PC1 → RGB/PC2 → RGB/PC3
RGB/PC can also be selected using the INPUT
SELECT button on the monitor. The input switches as
follows each time the button is pressed:
→ VIDEO1 → VIDEO2→ VIDEO3→ DVD/HD
     RGB/PC3 ← RGB/PC2 ← RGB/PC1 ←
e DVD / HD
Press this button to select DVD/HD as the source.
DVD/HD can also be...