NEC PX 60XM5 User Manual
Here you can view all the pages of manual NEC PX 60XM5 User Manual. The NEC manuals for Television are available online for free. You can easily download all the documents as PDF.
Page 1
PlasmaSync Plasma Monitor (Enhanced split screen Model) PlasmaSync 42XM5 PX-42XM5G PlasmaSync 50XM6 PX-50XM6G PlasmaSync 60XM5 PX-60XM5G User’s Manual Benutzerhandbuch Manuel d’utilisation Manual del Usuario Manuale dell’utente уководство пользователя Bruksanvisning Kullanım Kılavuzu Εγειρίδι ρήσης
Page 2
User’s Manual (Enhanced split screen Model) ENGLISH
Page 3
En-2
Precautions
Please read this manual carefully before using your plasma monitor and
keep the manual handy for future reference.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER. NO USER-SERVICEABLE
PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This symbol warns the user that uninsulated voltage
within the unit may have sufficient magnitude to cause
electric shock. Therefore, it is dangerous to make any
kind of contact...
Page 4
En-3 CAUTION When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country/area. Disposing of your used product EU-wide legislation as implemented in each Member State requires that used electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste. This includes plasma monitors and their electrical accessories. When you dispose of such products, please follow...
Page 5
En-4 Contents Contents of the Package Plasma monitor (1) Power cord (1, 3 m/9.8 feet) Remote control (1) AAA Batteries (2, Manganese battery for remote control) Manuals (Start up Guide and CD-ROM) Ferrite cores for power cord (2), bands for power cord (2) Ferrite core for remote cable (2) Cable clampers (3), beads bands (3) Options • Wall mount unit • Ceiling mount unit • Tilt mount unit • Tabletop Stand • Attachable speakers Important...
Page 6
En-5 50 mm (2)Wall Wall 50 mm (2) 50 mm (2) 50 mm (2) 50 mm (2) You can attach your optional mounts or stand to the plasma monitor in one of the following two ways: * While it is upright. (See Drawing A) * As it is laid down with the screen face down (See Drawing B). Lay the protective sheet, which was wrapped around the monitor when it was packaged, beneath the screen surface so as not to scratch the screen face. * Do not touch or hold the screen face when carrying the unit. • This device cannot be...
Page 7
En-6 Note: 1. The VIDEO1 and RGB1 terminals can be used for either INPUT or OUTPUT. When LOOP OUT is ON, do not connect an OUTPUT signal from another unit as it may damage the other unit due to an extraordinary load. 2. LOOP OUT can not be turned ON while signals are input to the RGB1 terminal. 3. LOOP OUT can be turned ON while signals are input to the RGB1 terminal if the POWER is switched ON. Information • To loop signals out to another plasma display, set the LOOP OUT to ON. • To create a video wall,...
Page 8
En-7
IN
OUT
4REMOTEEXTERNAL CONTROL
Remote Control
Cable*
To Remote Jack
Approx.
7 m / 23 ft
MENU/ ENTERINPUT SELECT
DOWN UP LEFT/-RIGHT/+
/ EXITVOLUME
MENU/ ENTERINPUT SELECT
DOWN UP LEFT/-RIGHT/+
/ EXITVOLUME
Top side
Bottom side 90°
: RGB
: RGB
: AUTO
: 1080B
: OFF
: OFF
1024768
EXITSEL.
RETURNMENU/ENTEROK
OPTION1
OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
HD SELECT
INPUT SKIP
ALL RESET
Using the remote control
Battery Installation and Replacement
Designated batteries:
Please use size...
Page 9
En-8 qPower Turns the monitor’s power on and off. wRemote sensor window Receives the signals from the remote control. ePOWER/STANDBY indicator When the power is on ............................. Lights green. When the power is in the standby mode ... Lights red. rINPUT SELECT / EXIT Switches the input. Functions as the EXIT buttons in the On-Screen Menu (OSM) mode. Front View MENU/ ENTERINPUT SELECT DOWN UP LEFT/-RIGHT/+ / EXIT VOLUME MENU/ ENTERINPUT SELECT DOWN UP LEFT/-RIGHT/+ / EXIT VOLUME 4567132...
Page 10
En-9 AAC IN Connect the included power cord here. BEXT SPEAKER L and R Connect speakers (optional) here. Maintain the correct polarity. Connect the (positive) speaker wire to the EXT SPEAKER terminal and the (negative) speaker wire to the EXT SPEAKER terminal on both LEFT and RIGHT channels. Please refer to your speaker’s owner’s manual. CVIDEO1, 2, 3 (BNC, RCA, S-Video) Connect VCR’s, DVD’s or Video Cameras, etc. here. VIDEO1 can be used for Input or Output. DAUDIO1, AUDIO2, AUDIO3 These are audio...