Nikon Camera Coolpix S7000 Reference Manual

							121
Connecting the Camera to a TV, Printer, or Computer
Connecting the Camera to a TV, 
Printer, or Computer
You can enhance your enjoyment of images and movies by connecting the 
camera to a TV, printer, or computer.
• Before connecting the camera to an external device, make sure the 
remaining battery level is sufficient and turn the camera off. Before 
disconnecting, make sure to turn the camera off.
• If the AC Adapter EH-62G (available se parately) is used, this camera can be 
powered from an electrical outlet. Do  not use any other make or model of 
AC adapter as it may cause the camera to heat up or malfunction.
• For information about the connection  methods and subsequent operations, 
refer to the documentation included with the device in addition to this 
document.
Insert the plug straight. Micro-USB connector
HDMI micro connector 
(Type D)
Open the connector 
cover. 
						

							122
Connecting the Camera to a TV, Printer, or Computer
Viewing images on a TVA123
Images and movies captured with the camera can be viewed 
on a TV.
Connection method: Connect a  commercially available HDMI 
cable to the TV’s HDMI input jack.
Printing images without using a computerA 124
If you connect the camera to a PictBridge-compatible printer, 
you can print images without using a computer.
Connection method: Connect the camera directly to the 
printer’s USB port with the USB cable.
Viewing and organizing images on a computerA 128
You can transfer images to a computer to perform simple 
retouching and manage image data.
Connection method: Connect th e camera to the computer’s 
USB port with the USB cable.
• Before connecting to a comput er, install ViewNX 2 on the 
computer (A 128).
• If any USB devices th at draw the power from the computer 
are connected, disconnect them from the computer before 
you connect the camera to it. Connecting the camera and 
other USB-powered devices to the same computer 
simultaneously may cause a camera malfunction or 
excessive power supply from  the computer, which could 
damage the camera or memory card. 
						

							123
Connecting the Camera to a TV, Printer, or Computer
1Turn off the camera and connect it to the TV.
•Make sure that the plugs  are properly oriented. Do  not insert or remove the 
plugs at an angle when connecting or disconnecting them.
2Set the TV’s input to external input.
• See the documentation provided with your TV for details.
3Hold down the  c (playback) 
button to turn on the camera.
• Images are displayed on the TV.
• The camera monitor does not turn on.
Connecting the Camera to a TV (Playback 
on a TV)
HDMI micro connector (Type D)
to HDMI jack 
						

							124
Connecting the Camera to a TV, Printer, or Computer
Users of PictBridge-compatible printers can connect the camera directly to the 
printer and print images without using a computer.
Connecting the Camera to a Printer
1Turn on the printer.
2Turn off the camera and connec t it to the printer using the 
USB cable.
• Make sure that the plugs  are properly oriented. Do  not insert or remove the 
plugs at an angle when connecting or disconnecting them.
3The camera is automatically turned on.
• The  PictBridge  startup screen (
1) is displayed in the camera monitor, 
followed by the  Print selection screen (
2).
Connecting the Camera 
to a Printer (Direct 
Print)
3215/11/2015Print selection12 
						

							125
Connecting the Camera to a TV, Printer, or Computer
BIf the PictBridge Startup Screen Is Not Displayed
When Auto is selected for  Charge by computer  (A 115), it may be impossible to 
print images with direct connection of the  camera to some printers. If the PictBridge 
startup screen is not displayed after the camera is turned on, turn the camera off and 
disconnect the  USB cable. Set Charge by computer  to Off and reconnect the 
camera to the printer.
Printing Images One at a Time
1Use the multi selector  JK to 
select the desired image and press 
the  k button.
•Move the zoom control toward  f(h ) to 
switch to thumbnail playback or  g(i ) to 
switch to full-frame playback.
2Use  HI  to select  Copies and 
press the  k button.
•Use  HI  to set the desired number of 
copies (up to 9) and press the  k button.
3Select  Paper size  and press the  k 
button.
• Select the desired paper size and press the 
k  button.
• To print with the paper size setting 
configured on the printer, select  Default.
• The paper size options available on the 
camera vary depending on the printer that 
you use.
4Select  Start print  and press the  k 
button.
• Printing starts.
3215/11/2015Print selection
Paper size Copies Start print 1   prints
PictBridge
Paper size Copies Start print
PictBridge
4   prints
Paper size Copies Start print
PictBridge
4   prints 
						

							126
Connecting the Camera to a TV, Printer, or Computer
Printing Multiple Images
1When the Print selection screen 
is displayed, press the  d (menu) 
button.
2Use the multi selector  HI to 
select  Paper size  and press the  k 
button.
• Select the desired paper size and press the 
k  button.
• To print with the paper size setting 
configured on the printer, select  Default.
• The paper size options available on the 
camera vary depending on the printer that you use.
• To exit the print menu, press the  d button.
3Select  Print selection , or Print all 
images , and press the k  button.
3215/11/2015Print selection
Paper size Print all images Print selection
Print menu
Paper size Print all images Print selection
Print menu 
						

							127
Connecting the Camera to a TV, Printer, or Computer
Print selectionSelect images (up to 99) and the number 
of copies (up to 9) of each.
•Use the multi selector  JK to select 
images, and use  HI to specify the 
number of copies to be printed.
• Images selected for printing are 
indicated by  M and the number of 
copies to be printed. To cancel the print 
selection, set the number of copies to 0.
• Move the zoom control toward  g(i ) to switch to full-frame playback or 
f (h ) to switch to thumbnail playback.
• Press the  k button when setting is complete. When the screen for 
confirming the number of print copies is displayed, select  Start print 
and press the  k button to start printing.
Print all images
One copy each of all images saved in the internal memory, or on the 
memory card, is printed.
•When the screen for confirming the number of print copies is displayed, 
select  Start print  and press the  k button to start printing.
Back
Print selection 
						

							128
Connecting the Camera to a TV, Printer, or Computer
Installing ViewNX 2
ViewNX 2 is free software that enables you to transfer images and movies to 
your computer so that you can view, edit, or share them. To install ViewNX 2, 
download the ViewNX 2 installer from the website below and follow the on-
screen installation instructions.
http://nikonimglib.com/nvnx/
For system requirements and other information, see the Nikon website for your 
region.
Transferring Images to a Computer
1Prepare a memory card that contains images.
You can use any of the methods below to  transfer images from the memory 
card to a computer.
• SD memory card slot/card reader : Insert the memory card into the card 
slot of your computer or the card re ader (commercially available) that is 
connected to the computer.
• Direct USB connection : Turn the camera off and  ensure that the memory 
card is inserted in the camera. Connect the camera to the computer using 
the USB cable. 
The camera automatically turns on.
To transfer images that are saved in  the camera’s internal memory, remove 
the memory card from the camera be fore connecting it to the computer.
Using ViewNX 2 (Transferring Images to a 
Computer) 
						

							129
Connecting the Camera to a TV, Printer, or Computer
If a message is displayed prompting you to choose a program, select 
Nikon Transfer 2.
•When using Windows 7
If the dialog shown at right is 
displayed, follow the steps 
below to select Nikon Transfer 2.
1Under  Import pictures 
and videos , click Change 
program . A program 
selection dialog will be 
displayed; select  Import 
File using Nikon Transfer 2  and click OK.
2Double-click  Import File.
If the memory card contains a large number of images, it may take a while for 
Nikon Transfer 2 to start. Wait  until Nikon Transfer 2 starts.
BNotes About Connecting the USB Cable
Operation is not guaranteed if the camera  is connected to the computer via a USB 
hub.
2After Nikon Transfer 2 starts, click  Start Transfer.
•Image transfer begins. When  image transfer is complete, ViewNX 2 starts and 
the transferred images are displayed.
• Consult online help for more information on using ViewNX 2.
3Terminate the connection.
•If you are using a card reader or card  slot, choose the appropriate option in 
the computer operating system to eject the removable disk corresponding 
to the memory card and then remove the memory card from the card reader 
or card slot. 
• If the camera is connected to the  computer, turn the camera off and 
disconnect the USB cable. 
Start Transfer 
						

							130
Technical Notes
Technical Notes
Caring for the Product .................................................................................131The Camera..............................................................................................131
The Battery ...............................................................................................132
The Charging AC Adapter ..................................................................133
Memory Cards.........................................................................................134
Cleaning and Storage ..................................................................................135 Cleaning ....................................................................................................135
Storage ......................................................................................................135
Error Messages ...............................................................................................136
Troubleshooting ............................................................................................140
File Names ........................................................................................................147
Optional Accessories ....................................................................................148
Specifications ..................................................................................................149 Approved Memory Cards ...................................................................153
Index...................................................................................................................155