Home > Nikon > Digital Camera > Nikon Coolpix S50c Users Manual

Nikon Coolpix S50c Users Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Nikon Coolpix S50c Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 64 Nikon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							99
    Shooting, Playback, and Setup Menus
    Playback Options: The Playback Menu
    The playback menu contains the following options.
    Displaying the Playback Menu
    Display the playback menu by pressing i and pressing m.
    • Use the rotary multi selector to choose and apply settings. (c9)
    • To exit the playback menu, press m.
    wPrint setc85
    Select pictures to print and the number of copies for each.
    zSlide showc101
    View pictures stored in the internal memory or on a memory card in 
    an automatic slide show.
    ADeletec102
    Delete all or selected pictures.
    DProtectc102
    Protect selected pictures from accidental deletion.
    ETransfer markingc103
    Mark existing pictures to transfer to a computer.
    GRotate imagec103
    Change the orientation of an existing picture.
    HSmall pic.c51
    Create a small copy of the current picture.
    LCopyc104
    Copy files between memory card and internal memory.
    Playback menu
    Print set
    Slide show
    Delete
    Protect
    Transfer marking
    Exit
    Downloaded From camera-usermanual.com Nikon Manuals 
    						
    							100
    Playback Options: The Playback Menu
    Shooting, Playback, and Setup Menus
    Selecting Multiple Pictures
    When following the steps below to select multiple
    pictures for a print set (c85), deletion (c102),
    protection from deletion (c102), transfer
    (c103), rotate (c103), copying between internal
    memory and the memory card (c104), or for the
    welcome screen (c107), the screen shown at right
    is displayed. Follow the procedure described below
    to select multiple pictures.
    1Use the rotary multi selector to choose
    the desired picture.
    Only one picture can be selected for [Rotate image]
    and [Welcome screen]. Proceed to step 3.
    Press v (k) to switch to full-frame playback.
    Press t (j) to switch back to thumbnail display.
    2Press G or H to select [ON] or [OFF] (or
    the number of copies).
    When [ON] is selected, a check mark (y) is displayed
    in the top left corner of the current picture. Repeat
    steps 1 and 2 to select additional pictures.
    3Press d.
    The setting is enabled.
    ON/OFF
    Protect
    Back
    ON/OFF
    Protect
    Back
    ON/OFF
    Protect
    Back
    K
    Done
    Downloaded From camera-usermanual.com Nikon Manuals 
    						
    							101
    Playback Options: The Playback Menu
    Shooting, Playback, and Setup Menus
    z Slide Show
    Play back pictures stored in the internal memory or
    on a memory card in an automated “slide show”.
    1Display the slide show menu; use the
    rotary multi selector to choose [Start]
    and press d.
    To change the interval between pictures, choose
    [Frame intvl], select the desired interval time, and
    press d before choosing [Start].
    To repeat the slide show automatically, enable [Loop]
    and press d before choosing [Start]. The check mark (y) will be added to the
    loop option when enabled.
    2The slide show begins. 
    While the slide show is in progress, the following
    operations can be performed:
    • Use the rotary multi selector to switch pictures.
    Continue rotating in either direction to fast forward
    (clockwise) or rewind (counterclockwise).
    • Press d to pause the slide show.
    The menu shown at right is displayed when the slide
    show ends or is paused. Choose [Restart] and press
    d to play the slide show again, or choose [End] to
    stop the slide show and return to the playback menu.
    jNotes on Slide Show
    • Only the first frame of movies (c68) included in slide shows is displayed.
    • Even if [Loop] is selected, the monitor will turn off automatically if no operations are per-
    formed for 30 minutes. The camera will turn off automatically if no operations are per-
    formed for another three minutes.
    Slide show
    ExitLoop Frame intvlStart Pause:
    Slide show
    ExitLoop Frame intvlStart Pause:
    Frame intvlRestart
    End Pause
    PausePause
    Downloaded From camera-usermanual.com Nikon Manuals 
    						
    							102
    Playback Options: The Playback Menu
    Shooting, Playback, and Setup Menus
    A Delete
    The delete menu contains the options shown
    below.
    If no memory card is inserted in the camera, pic-
    tures in the internal memory will be deleted.
    If a memory card is inserted, pictures on the mem-
    ory card will be deleted.
    kNotes on Deletion
    • Once deleted, pictures cannot be recovered. Transfer important images to a computer
    before deletion.
    • Pictures marked with the D icon are protected and cannot be deleted.
    D Protect
    Protect selected pictures from accidental deletion.
    Note, however, that formatting will delete pro-
    tected files (c117).
    See “Selecting Multiple Pictures” (c100) for
    more information on using this function.
    Protected pictures are recognized by the D icon (c7) in full-frame play-
    back mode and the erase selected images screen, and by the Q icon (c45)
    in 9-picture thumbnail playback mode.
    Erase selected images
    Delete selected pictures (c100).
    Erase all images
    Delete all pictures stored in the internal memory or on the memory card.
    • Choose [Yes] and press d in the confirmation 
    dialog to delete all pictures.
    • To exit without deleting pictures, choose [No] 
    and press d.
    Delete
    Erase all images
    ExitErase selected images
    Delete
    ExitYe sNo Erasing all images
    (    excluded)
    ON/OFF
    Protect
    Back
    Downloaded From camera-usermanual.com Nikon Manuals 
    						
    							103
    Playback Options: The Playback Menu
    Shooting, Playback, and Setup Menus
    E Transfer Marking
    Change transfer marking (E) for existing pictures.
    When the camera is connected to a computer with
    PictureProject installed via the supplied audio video/
    USB cable, pressing d transfers only the pictures
    marked with a E icon (c77). At the default set-
    ting, all pictures are marked for transfer.
    Pictures selected for transfer are recognized by the E icon (c7) in full-
    frame playback, and by the P icon (c45) in 9-picture thumbnail playback
    mode.
    G Rotate Image
    Record picture orientation information for playback
    display.
    Pictures can be rotated 90° clockwise or counter-
    clockwise. 
    Choose a file to be rotated in the picture selection
    screen (c100) and select the direction to rotate
    the chosen picture. Rotate the rotary multi selector clockwise (or press J) or
    counterclockwise (or press I) in the rotate image screen. When [Record ori-
    entation] (c116) is set to [Auto] (default setting), you can rotate (up to
    180°) pictures taken in “tall” orientation by rotating the rotary multi selector
    either clockwise or counterclockwise.
    Press d to record the orientation for the picture as shown in the rotate
    image screen.
    All on
    Mark all images for transfer.
    All off
    Remove transfer marking from all images.
    Select Image(s)
    Mark selected pictures for transfer in the picture selection screen (c100).
    Transfer marking
    All off
    Exit All on
    Select image(s)
    Select image
    Back
    Rotate image
    Back RotateRotate image
    Back RotateRotate image
    Back Rotate
    Rotate 90° 
    counterclockwiseRotate 90° 
    clockwise
    Downloaded From camera-usermanual.com Nikon Manuals 
    						
    							104
    Playback Options: The Playback Menu
    Shooting, Playback, and Setup Menus
    L Copy
    Copy pictures between the internal memory and a
    memory card. 
    First, select from the following options.
    Then, select the desired copy option.
    Choose [Selected images] (c100) to copy specific
    pictures in the internal memory or memory card. To
    copy all pictures, choose [All images].
    jNotes on Copying Pictures
    • If there is not enough space in the memory or on the memory card to receive the copy, an
    error message will be displayed. Delete unwanted pictures or insert a new memory card (if
    using a memory card) before trying again.
    • The file format of images that can be copied is JPEG, MOV, or WAV.
    • Pictures taken with another make of camera or that have been modified on a computer
    cannot be copied.
    k[Memory contains no images.] Message
    If there are no pictures stored on the memory card when playback mode is applied, the mes-
    sage, [Memory contains no images.], will be displayed. Press m to display the copy option
    screen, and copy the pictures stored in the camera’s internal memory to the memory card.
    kFile Names of Copied Pictures 
    • When pictures are copied using the [Selected images] option, the newly copied pictures are
    numbered consecutively from the largest number existing between the two memory sources.
    Ex: when the last number in the source memory is 32 (DSCN0032.JPG) and the last num-
    ber in the destination memory is 18 (DSCN0018.JPG), the copied pictures are assigned
    numbers starting from DSCN0033.
    • When pictures are copied using the [All images] option, all the pictures in the folder are
    copied with the same file numbers. New folder numbers are assigned in ascending order
    starting from the largest folder number available. If a new folder cannot be created, the
    folder is not copied and an error message will be displayed.
    kCopiesEdited copies have the same protection marking (c102) as the original but are not marked
    for printing (c85) or transfer (c103).
    MNO
    Copy pictures from internal memory to memory card.
    ONM
    Copy pictures from memory card to internal memory.
    Copy
    Exit
    Camera to card
    All images
    Exit Selected images
    Downloaded From camera-usermanual.com Nikon Manuals 
    						
    							105
    Shooting, Playback, and Setup Menus
    Basic Camera Setup: The Setup Menu
    The setup menu contains the following options.
    RMenusc106
    Choose how menus are displayed.
    HQuick startupc107
    Enable or disable welcome screen and start-up sound.
    VWelcome screenc107
    Select screen displayed when camera is turned on.
    WDatec108
    Set camera clock and choose home and destination time zones.
    ZMonitor settingsc111
    Adjust monitor brightness and choose display style.
    fDate imprintc112
    Imprint date or date counter on pictures.
    bVibration reductionc114
    Choose whether or not vibration reduction is enabled.
    uAF assistc115
    Enable or disable AF assist illumination.
    hSound settingsc115
    Adjust sound and volume settings.
    IRecord orientationc116
    Choose whether or not to record the orientation of a picture 
    taken.
    iAuto offc116
    Set time before camera enters standby mode to save power.
    M/OFormat memory/Format cardc117
    Format internal memory or memory card.
    jLanguagec118
    Choose language for camera menus and messages.
    kInterfacec118
    Adjust settings for connection to television or computer.
    nReset allc119
    Restore camera settings to default values.
    BFirmware versionc121
    Display camera firmware version.
    Downloaded From camera-usermanual.com Nikon Manuals 
    						
    							106
    Basic Camera Setup: The Setup Menu
    Shooting, Playback, and Setup Menus
    Displaying the Setup Menu
    First, display the playback-mode or shooting-mode selection menu by press-
    ing C. Then select Z (use the rotary multi selector), press d.
    • Use the rotary multi selector to choose and apply settings. (c9)
    • To exit the setup menu, press C.
    R Menus
    Choose whether the initial menus displayed for the
    shooting menu (c88), high-sensitivity menu
    (c88), scene menu (c34), movie menu (c63),
    one-touch portrait menu (c44), anti-shake menu
    (c42), playback menu (c99), and setup menu
    (displayed when m is pressed) (c105) use
    [Text] (default setting) or [Icons].
    When [Icons] is selected, all menu items can be displayed in a single page
    and the highlighted menu name appears at the top of the monitor.
    Set up
    Menus
    Quick startup
    Welcome screen
    Date
    Monitor settingsSet up
    Menus
    Text
    Icons
    R
    HVWZ
    fbuh
    I
    iO kjn
    B
    MenusSet up
    Menus
    Quick startup
    Welcome screen
    Date
    Monitor settings
    [Text] [Icons]Menu names
    Downloaded From camera-usermanual.com Nikon Manuals 
    						
    							107
    Basic Camera Setup: The Setup Menu
    Shooting, Playback, and Setup Menus
    H Quick Startup
    Choose [On] (default setting) to disable the wel-
    come screen and start-up sound. The camera will
    be ready for shooting as soon as it is turned on.
    Set to [Off] when enabling the welcome screen.
    V Welcome Screen
    You can select the welcome screen to be displayed
    when the camera is turned on.
    To set the welcome screen, [Quick startup] must be
    set to [Off].
    lWhen [Select an image] is Selected
    If you have already selected a welcome screen picture, you can
    select a new one by following the confirmation dialog.
    Nikon
    Displays a welcome screen when the camera is turned on.
    Animation (default setting)
    Displays a short animation when the camera is turned on.
    Select an image
    Select a picture in the internal memory or on the memory card for the wel-
    come screen. Choose a picture in the picture selection screen (c100), and 
    press d. 
    The image used in the welcome screen is a copy of the selected picture and, 
    therefore, is not affected if the original picture is deleted or the memory card 
    is removed.
    Pictures taken at an image mode setting of [16:9] (c89) can not be selected.
    Quick startup
    On
    Off
    Welcome screen
    Nikon
    Animation
    Select an image
    Welcome screen
    Ye sNo Replace current
    image?
    Downloaded From camera-usermanual.com Nikon Manuals 
    						
    							108
    Basic Camera Setup: The Setup Menu
    Shooting, Playback, and Setup Menus
    W Date
    Set the camera clock and choose home and travel
    destination time zones.
    Setting Travel Destination Time Zone
    1Use the rotary multi selector to choose
    [Time zone] and press d.
    The time zone menu is displayed.
    2Choose Y and press d.
    The date and time displayed on the monitor changes
    according to the region currently selected.
    If daylight saving time is in effect, use the rotary multi
    selector to choose [Daylight saving] and press d, and
    then press G. The time is automatically advanced one
    hour.
    3Press J.
    The new city time zone menu is displayed.
    Date
    Set camera clock to current date and time.
    See “Setting Display Language, Date, and Time” (c16-17) for more informa-
    tion.
    Time zone
    X (home time zone) can be specified and daylight saving enabled or disabled 
    from [Time zone] options. When Y (destination time zone) is selected, the 
    time difference (c110) is automatically calculated and the date and time in 
    the selected region are recorded. Useful when travelling. 
    Date
    15/05/2007 15:30
    Date
    Time zone
    Date
    15/05/2007 15:30
    Date
    Time zone
    Time zone
    Tokyo, SeoulLondon,Casablanca
    Daylight saving Daylight saving15/05/2007 15:30
    Time zone
    Tokyo, SeoulLondon,Casablanca
    Daylight saving Daylight saving15/05/2007 23:30
    Downloaded From camera-usermanual.com Nikon Manuals 
    						
    All Nikon manuals Comments (0)

    Related Manuals for Nikon Coolpix S50c Users Manual