Nikon Coolpix S560 Users Manual

7
Parts of the Camera
Introduction
Playback
*1Icons for Auto sorting playback folder display or the Favorites Folder selected in playback 
will appear.
*
2The displayed icons vary with the settings in shooting mode.
15/11/2008 12:009999.JPG9999.JPG
999999999 999
15/11/2008 12:00
5
4
3
6 12
8
a
b 9 14
999999999999 9999999999999 999
15 17
1316
10 11 12
79h59m59s9h59m59s59m59s59m59s
1Date of recording ......................................... 16
2Time of recording............................................

8
Introduction
Basic Operations
The c (Playback) Button
The r (favorites) Button
Favorites Menu
Press c once in shooting mode to enter playback 
mode; press again to switch back to shooting mode. 
Pressing the shutter-release button in playback mode 
(A26) will also activate shooting mode.
If the camera is turned off, hold down c to turn the 
camera on in playback mode (A26).
Press r to display the Favorites menu. The camera 
mode can be switched to the following modes using 
the favorites menu. Use the...

9
Basic Operations
Introduction
The Multi Selector
This section describes standard uses of the multi selector to select modes, select 
menu options and to apply selection.
For Shooting
For Playback
For the Menu Screen
CNotes on the Multi SelectorIn this manual, H, I, J and K are sometimes used to indicating the up, down, left and right 
operating parts of the multi selector.
Flash mode
Display m (flash mode) (A28) menu or move cursor up.
Display n 
(self-timer) 
(A30) menu.
Display p (macro mode) (A31)...

10
Basic Operations
Introduction
The d Button
Press d to display the menu for the selected mode. Use the multi selector to 
navigate the menus (A9).
To exit the menu display, press d again.
Shooting menu
Exit Image mode
White balance
Continuous
ISO sensitivity
Color options
The selected option. Displayed when 
there are one or 
more menu items 
to follow.Displayed when the 
menu contains two or 
more pages.
Displayed when 
there are more 
previous menu 
items.Shooting menu
ExitAF area mode
ExitFace...

11
Basic Operations
Introduction
Help Displays
Press g (j) when M is displayed at the lower right of the menu screen to view a 
description of the currently selected menu option.
To return to the original menu, press g (j) again.
Shutter-release Button
The camera features a two-stage shutter-release button. To set focus and 
exposure, press the shutter-release button halfway, stopping when you feel 
resistance. Focus and exposure lock while the shutter-release button is held in this 
position. To release...

12
First Steps
First Steps
Charging the Battery
The camera uses a Rechargeable Li-ion Battery EN-EL11 (supplied).
Charge the battery with the Battery Charger MH-64 (supplied) before first use or 
when the battery is running low.
It is recommended to charge the battery within six months after it is first used 
(A135).
1Connect the power cable.
Connect the power cable to the battery charger 1 and insert the wall plug into a
power outlet 2. The CHARGE lamp will light to show that the charger is on 3....

13
Charging the Battery
First Steps
The CHARGE lamp status and description of each status are as follows.
3Unplug the charger.
Remove the battery and unplug the charger.
BNote on the Battery Charger
Be sure to read and follow the warnings for the battery charger on pages iii and iv before using the 
battery charger.
The supplied battery charger is for use only with a Rechargeable Li-ion Battery EN-EL11. Do not use 
with incompatible batteries.
When recharging the battery, the ambient temperature should...

14
First Steps
Inserting the Battery
Insert a Rechargeable Li-ion Battery EN-EL11 (supplied) that has been fully 
charged, using the Battery Charger MH-64 (supplied), into your camera.
1Open the battery-chamber/memory card slot 
cover.
2Insert the battery.
Confirm that the positive (+) and negative (-) terminals 
are oriented correctly as described on the label at the 
entrance of the battery chamber, and insert the battery.
Turn the orange battery latch on the battery side in the 
direction indicated by...

15
Inserting the Battery
First Steps
Removing the Battery
Turn the camera off and make sure that the power-on 
lamp and the monitor have gone out before opening 
the battery-chamber/memory card slot cover.
To eject the battery, turn the orange battery latch in 
the direction shown 1. The battery can then be 
removed by hand 2.
•Note that the battery may become hot during use; 
observe due caution when removing the battery.
Turning On and Off the Camera
To turn on the camera, press the power switch. The...

16
First Steps
Setting Display Language, Date and Time
A language-selection dialog is displayed the first time the camera is turned on. 
1Press the power switch to turn on the camera.
The power-on lamp (green) will light for a moment and 
the monitor will turn on.
2Use the multi selector to choose the 
desired language and press k.
For information on using the multi selector, 
see “The Multi Selector” (A9).
3Choose Yes and press k.
If No is selected, the date and time will not be set.
4Press J or K to...