Nitsuko Digital System Phone Program Record Form Manual

Digital
System
Phone Program
Record Form 

Table of Contents
About the Program Record Form
General Programming Tips
Entering the Program Mode
Entering a Program
Entering Data, Erasing Mistakes, and Moving Through Options
Saving and Exiting 

Programs
Program 1 - Class of Service
Program 2 - Intercom Signaling
Program 3 - Miscellaneous System Features
Program 4 - System Timers
Program 5 - PBX Trunk Access Codes
Program 6 - Toll Restriction
Program 7 - Music, External Paging, Relays
Program 8 - System Messages 

Program 10 - Line Port Characteristics
Program 11 - Line Groups
Program 12 - Line Features
Program 14 - Extension Port Characteristics
Program 15 - Programming Access Level
Program 16 - Line and Line Group Access
Program 17 - Key Assignments
Program 18 - Extension Features (Part I)
Program 18 - Extension Features (Part II) 

Program 19 - Extension Hunt Groups
Program 20 - System Initialization 

In Edit ➮Preferences ➮General, set the following:
–Default Magnification= Fit Width
–Display Splash Screen at Startup= Disabled (box not checked)
–Display Open Dialog Box at Startup= Disabled (box not checked)


For easiest reading on-screen, select View➮Fit Width(or Ctrl K). This option
is automatically enabled if you set the 
Default Magnification
in General
Preferences as described above.


To return to the opening screen at any time, press Home.
To scroll up or down on a page, press PageDownor...

Provides on-line viewing and printing.


Extensive search and navigation capabilities.


Ensures more timely turnaround of documents.


When we provide an Acrobat manual with a product (e.g., Nitsuko TAPI Driver),
you are assured of having the most up-to-date manual available.


With the installation of a PC fax/modem, it makes faxing of any brochure, user
guide, proposal or manual quick and easy.


Acrobat Reader programs for Macintosh, DOS and UNIX platforms also can be
provided, if required.


For...

About the Program Record Form
The Program Record Form lets you record the way you configure a customers DIGITAL SYSTEM and shows
you how to enter the configuration data into system memory.  For each program in the system, there is a form (grid)
for recording the programs configuration data codes.  Next to each grid are instructions for entering the data
codes into system memory from a system programming extension (e.g., a display phone connected to port 00,
initially extension 300).
Youll find the...

-Keys 1-20 give you access to programs 1-20. Keys 1-5 are on the left, keys 
 6-10 are on the right, keys 11-16 are directly below the dial pad. The HOLD
 (Program 17), CONF (Program 18), MIC/DND (Program 19), and ICM (Program 20)
 keys are in the last row of keys. Note: Program numbers 9 and 13 are not used.
Entering Data, Erasing Mistakes and Moving Through Options
To enter data after you enter a program: 
1. Dial the data.
2. Press the # key.
This step stores the data and moves you to the next feature...

Program 1 - Class of Service
COS Only Intercom Calls at Night
 Off-Premise Call Forward
 Break-In (Intrusion)
 Camp-On (Busy Extension)
 Internal Call Forward
 System Speed Dial
 Toll Restriction Level
 Only Local Calls (Day/Night)
 Only Local Calls at Night
 Extended Ring
 Privacy
 Callback Priority
 Direct Trunk Access/Camp-On
 All Call Page
 Page Zone 1 Access
 Page Zone 2 Access
 Page Zone 3 Access
 Silent Monitor
 No Single Line Flash/ACD Supervisor
 Single Ring for ASI/OPX
 Only CO Call FWD to VX...