Nitsuko Ds2000 Multibutton Telephone Feature Handbook

Hold lets you put a call in a tem-
porary waiting state. The caller on
Hold hears silence or Music on
Hold, not the conversation in your
work area. While your call waits
on Hold, you can process other calls and use other features. Calls
that you leave on Hold too long will recall to you if you forget to
pick them up.
There are four types of Hold:

System (Regular) Hold
With System Hold, an outside call you place on Hold flashes
the line key at your co-workers’ phones. Any co-worker with
a flashing line...

To  place an outside call on System Hold:
1. Press .
2. Hang up.
The line will recall if you leave it on Hold too long.
To  pick up an outside call on System Hold:
1. Press the flashing line key.
To  pick up an outside call on System Hold at a co-worker’s
extension:
1. Press .
2. Dial  followed by the line number (e.g., 01
for line 1).
To  place an outside call on Exclusive Hold:
1. Press twice.
To  pick up a trunk call on Exclusive Hold:
1. Press the flashing line key.
To  place an Intercom call on...

Hotline gives you one-button
calling and Transfer to the
co-worker assigned as your
Hotline partner. Your Hotline key
also shows you the status of your
partner’s extension.
Hotline Key Flash Rates
When the key is: The covered extension is:
Off Idle or not installed
On Busy or ringing
Flashing Fast In Do Not Disturb
To  place a call to your Hotline partner:
1. Press your Hotline key.
To  Transfer your outside call to your Hotline partner:
1. While on the call, press your Hotline key.
2. Announce the call...

Your display telephone has
Interactive Soft Keys that provide
intuitive feature access. You’ll
find it is no longer necessary to
remember feature codes to use the
advanced features of your phone.
Instead, the function of your soft
keys change as you process calls.
When appropriate, this handbook provides the Interactive Soft
Key steps along with the codes for each feature. For additional
information on your soft keys, refer to the separately printed Soft
Key Glossary (P/N 80000GLO**).
48
Interactive Soft...

Intercom gives you access to all
your co-workers and your sys-
tem’s attendants.
Handsfree Answerback
Handsfree Answerback lets you answer a voice-announced
Intercom call by speaking toward your phone (without lifting the
handset). Handsfree Answerback is also a convenience when you
don’t have a free hand to pick up the handset.
To  place an Intercom call:
1. Lift handset and press  .
2. Dial your co-worker’s extension number (e.g., 301).
To call your operator, dial the operator’s exten-
sion number, or...

User Programmable Feature
Universal Slot:# V A
Fixed Slot:# I V or # I R
Enable voice-announce or ringing for your incoming Intercom calls.
See User Programmable Featuresat the end of this guide for more.
Using Your Soft Keys
+ + 
Handsfree Answerback  On
(Forced Intercom Ringing Off)
Handsfree Answerback  Off
(Forced Intercom Ringing On)
VAOFF
VAON
VANNMOREPGM
50
Intercom 

Last Number Redial allows you to
quickly redial the last outside num-
ber you dialed. Quickly recall a
busy or unanswered number with-
out manually dialing the digits. Last Number Redial saves in the
system memory the last 32 digits you dial, and can retain any com-
bination of digits 0-9, # and *. The system remembers the digits
regardless of whether the call was answered, unanswered or busy.
To  redial your last call:

Standard Operation
1. Lift the handset.
2. (Optional) Press an idle line key to...

With Meet-Me Conference, you
can set up a telephone meeting
with some of your co-workers —
without leaving the office. Your
co-workers join the Conference by dialing a Meet-Me
Conference code.
To  set up a Meet-Me Conference:
1. Lift handset and press  .
2. Dial .
OR
Press .
3. Dial a page zone number.
Your page zone numbers are 1-7 for zones 1-7
and 0 for All Call.
4. Announce the Meet-Me Conference code.
Meet-Me Conference codes are #11 and #12.
5. Do not hang up.
6. Press   and dial the announced...

To  join a Meet-Me Conference:
1. Listen for page announcing the Meet-Me Conference.
2. Lift handset and press  .
3. Dial the announced Meet-Me Conference code.
Meet-Me Conference codes are #11 and #12.
53
Meet-Me Conference 

You can leave a Message Waiting
indication at a busy or unanswered
co-worker’s phone requesting a
return call. You don’t have to keep calling your co-worker back,
hoping to find them available. The Message Waiting indication is a
flashing MW key on your co-worker’s phone. When your co-work-
er answers their Message Waiting, you’ll automatically get a call.
You can leave Messages Waiting at any number of extensions.
Also, any number of co-workers can leave Messages Waiting at
your phone.
To  leave a...