Nitsuko Onyx Vsi Multibutton Telephone Quick Reference Guide

Multibutton Telephone
Quick Reference Guide
88921MBG02
VSI02.QXD  7/10/98 11:31 AM  Page 12 

CLEAR
CHECK
88921 - 4
1
92
103
114 6 1
125 7 2
136 8 3
147 9 4
158 105
16
2
5
8
0 1
4
7
3
6
9#
CALL 2 CALL 1
DND
HOLD LND DIAL
MIC FLASH
SPK
VOLUME CONFMW
The 
Alphanumeric Displayhelps you use
features and tells you about your calls. With
optional Caller ID, a ringing line may show
your callerÕs number and name.
Use the VOLUME Controls to adjust the
volume of ringing, Paging, Background Music,
Handsfree announcements or your handset. After calling a co-worker, press
FLASHto leave them a Message
Waiting....

CLEAR
CHECK
1
92
103
114 6 1
125 7 2
136 8 3
147 9 4
158 105
16
2
5
8
0 1
4
7
3
6
9#
CALL 2 CALL 1
DND
HOLD LND DIAL
MIC FLASH
SPK
VOLUME CONFMW
Press LNDto automatically redial the last
number you called.
Press to use Handsfree instead
of the handset.
With User-Programmable
Featuresyou can customize
selected features right from
your phone.
Use Microphone Muteto turn off the Handsfree microphone.Use CALL1or CALL2to call co-
workers or place outgoing calls.
You can place an Intercom
or outside call on...

Placing an Outside Call . . .
1.(Optional) Lift handset.
2.Press and dial outside number.
¥You may also have line group (rotary)
keys on your phone.¥If your system is behind a PBX, you
may have to dial 9 before your number.
OR
1.(Optional) Lift handset.
2.Press and dial code for outside line.
¥ You may be able to dial:
Line numbers (e.g., 801).
Line group numbers (9 or 90-98).
Line extension numbers (e.g., 348).
9 or 90 for Automatic Route Selection.
Calling a Co-Worker . . .
1.(Optional) Lift handset....

If your call doesnÕt go through . . .Camp On and Callback
1.Dial to Camp On(wait without
hanging up).
¥(For Intercom calls) The called party
hears two beeps. If you hear ring/busy,
dial 1. You can Voice Overthe call.¥(For outside calls) When you hear new
dial tone, place your call again.OR
1.Dial and hang up to leave a
Callbackfor a free line or extension.
¥Wait for the system to call you back.
2.Lift handset or press when the sys-
tem calls you back.
3.(Outside calls only) Place your call again.
To...

Answering Outside Calls . . .
1.Lift handset or press .
¥Press line key if
not connected to call.¥Some line keys may be line group
(incoming line rotary) keys.
Answering Intercom Calls . . .
1.Speak toward your phone.
¥The mic in your phone picks up your voice.
You can lift the handset for privacy.¥If you hear two beeps and a co-workerÕs
voice while on a handset call, press and
hold MIC to respond privately.
OR
1.Press the flashing key.¥The mic in your phone picks up your voice.
You can lift the handset...

Your call can wait at your phone . . .Hold
1.Do not hang up.
2.Press .
¥This puts your outside call on System
Hold. Your co-workers can take the
call off Hold. To place the call on
Exclusive Hold, press HOLDagain.¥Intercom calls automatically go on
Exclusive Hold when you press HOLD.
1.(Optional) Lift handset.
2.Press flashing .OR
2.If the call was not on a line key (or was an
Intercom call), press .
OR
2.If a co-worker placed the outside call on
Hold (and you donÕt have a line key for it):
¥Press + +...

Park a call in orbit
1.Do not hang up.
2.Press + dial Park Orbit number.
¥ System Park orbits are 60-69.
¥ Park a call at co-workerÕs extension;
dial * + co-workerÕs extension number.
3.Page your co-worker to pick up the call.
¥For Paging, press CALL1and dial 1*
for All Call or 2*-8* for zones 1-7.
4.Hang up.
1.(Optional) Lift handset for privacy.
2.Press .
3.Dial the Park Orbit number.¥Your choices are system orbits 60-69 or
* and the Personal Park orbit number.
Forward your calls to a co-worker . . ....

Automatically redial calls . . .Last Number Redial
1.(Optional) Lift handset.
¥Press a line key to preselect a line.
2.Press .¥If you hear busy tone, press an idle line key
to have your call dial out automatically.
Quickly dial co-workers and outside calls . . .Direct Station Selection (DSS)
1.(Optional) Lift handset.
2.Press .
¥Your DSS keys show the status of your
co-workers: idle (dark), busy (on) or in
Do Not Disturb (flashing).
3.Press DSS key (1-15) for co-worker.
1.Press + .
2.Press the DSS key...

4.(Optional if you see PROGM NAME Y/N)¥Press Y to program name or N to skip to step 5.¥Dial the first letter of the desired name, fol-
lowed by the digit (1, 2 or 3) that selects the
letter.
(For example, for B dial 2 2.)
(Press 0 to enter a blank space, Q or Z.
Press * to erase a name.)¥Repeat the above steps to enter more let-
ters, then press # when you are done.
5.Press , dial line number, or
to store an Intercom feature, press .
6.Dial number you want to store.¥You can press HOLD to enter a pause,...