Nokia 2600c2 User Guide

1. General information
About your device
The wireless device described in this guide is approved for
use on the EGSM 900 and GSM 1800 networks. Contact your
service provider for more information about networks.
When using the features in this device, obey all laws and
respect local customs, privacy and legitimate rights of
others, including copyrights.
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred, or forwarded....

Some networks may have limitations that affect how you
can use network services. For instance, some networks
may not support all language-dependent characters and
services.
Your service provider may have requested that certain
features be disabled or not activated in your device. If so,
these features will not appear on your device menu. Your
device may also have a special configuration such as
changes in menu names, menu order, and icons. Contact
your service provider for more information.
Enhancements...

The PIN code supplied with the SIM card protects the card
against unauthorized use. The PIN2 code supplied with
some SIM cards is required to access certain services. If you
enter the PIN or PIN2 code incorrectly three times in
succession, you are asked for the PUK or PUK2 code. If you
do not have them, contact your service provider.
The module PIN is required to access the information in the
security module of your SIM card. The signing PIN may be
required for the digital signature. The barring password...

Customer service
If you need to contact customer service,
check the list of local Nokia Care contact
centers at www.nokia.com/
customerservice.
Maintenance
For maintenance services, check your nearest Nokia service
center at www.nokia.com/repair.
2. Get started
Install SIM card and battery
Always switch the device off and disconnect the charger
before removing the battery.
The SIM card and its contacts can be easily damaged by
scratches or bending, so be careful when handling,
inserting, or removing the...

2. Insert the SIM card (3).
3. Insert the battery (4) and replace the back cover (5).
Charge the battery
Check the model number of any charger before use with
this device. This device is intended for use when supplied
with power from the AC-3 charger.
Warning:  Use only batteries, chargers, and
enhancements approved by Nokia for use with this
particular model. The use of any other types may invalidate
any approval or warranty, and may be dangerous.
This phone is intended for use with a BL-5BT battery....

Change front cover
Note:  Always switch off the power and disconnect
the charger and any other device before removing the
covers. Avoid touching electronic components while
changing the covers. Always store and use the device with
the covers attached.
1. Press the release button and
remove the back cover (1).
2. Carefully remove the front cover
(2, 3).
3. Align the bottom of the front
cover to the bottom of the phone
(4), and press the front cover to lock it into place (5).
Antenna
Note: Your device may...

The picture shows the antenna area marked in grey.
Strap
Remove the back cover, thread the strap as
illustrated, tighten it, and replace the back
cover.
Keys and parts
1Earpiece
2Display
3Selection keys
4Navi™key: hereafter referred
to as scroll key
5Call key
6End key and power key
Get started
© 2007 Nokia. All rights reserved. 17 

7Strap eyelet
8Camera lens
9Loudspeaker
10Release button
11Microphone
12Headset connector
13Charger connector
Note:  Do not touch this connector as it is intended
for use by authorized personnel only.
Switch the phone on and off
To switch the phone on or off, press and hold the power
key.
Get started
© 2007 Nokia. All rights reserved. 18 

Standby mode
When the phone is ready for use, and you have not entered
any characters, the phone is in the standby mode.
1
Network signal strength
2Battery charge level
3Network name or operator logo
4Functions of selection keys
The left selection key is Go to for you to view the functions
in your personal shortcut list. When viewing the list, select
Options >  Select options to view the available functions,
or select Options > Organise to arrange the functions in
your shortcut list.
Keypad lock...

Menu > Settings > Phone > Automatic keyguard >
On.
To answer a call when the keypad is locked, press the call
key. When you end or reject the call, the keypad
automatically locks.
When the device or keypad is locked, calls may be possible
to the official emergency number programmed into your
device.
Functions without a SIM card
Some functions of your phone may be used without
installing a SIM card, such as the radio, games, and data
transfer with a compatible PC or another compatible
device. Some...