Nokia 5800d1 User Manual

   A  U M T S  p a c k e t  d a t a  c o n n e c tion is active (network service). indicates that the connection is suspended and 
 that a
connection is being established.
   You have set the device to scan for wireless LANs, and a
wireless LAN is available (network service).   A wireless LAN connection is active in a network that
uses encryption.   A wireless LAN connection is active in a network that does
not use encryption.   Bluetooth connectivity is activated.   Data is being transmitted using...

3. Close the cover of the memory card
slot. Ensure that the cover is properly
closed.Remove the memory card
Important: Do not remove the memory card during an
operation when the card is being accessed. Doing so may
damage the memory card and the device, and corrupt data
stored on the card.
1. If the device is switched on, before you remove the card,
press the power key, and select Remove memory card.
2. When Remove memory card? Some applications will
be closed. is displayed, select Yes.
3. When Remove...

To open a list of last dialled numbers, in the home screen,
press the call key.
To use voice commands, in the home screen, press and hold
the call key.Antenna locationsYour device may have internal and external antennas. Avoid
touching the antenna area unnecessarily while the antenna
is transmitting or receiving. Contact with antennas affects the
communication quality and may cause a higher power level
during operation and may reduce the battery life.Cellular antenna
Bluetooth and
WLAN antenna
GPS...

emergency number programmed into your device. To make
calls, you must first activate the phone function by changing
profiles. If the device has been locked, enter the lock code.
When you have activated the offline profile, you can still use
a wireless LAN (WLAN), for example, to read your e-mail or
browse on the internet. You can also use Bluetooth
connectivity while in the offline profile. Remember to comply
with any applicable safety requirements when establishing
and using WLAN or Bluetooth...

3. Open the cover of the SIM
card slot. Place the tip of the
stylus in the opening under
the battery, and push the SIM
card sideways to slide it out
of the slot. Pull the SIM card
out.
4. Replace the battery and the
back cover.Attach a wrist strap
Tip: Attach the
plectrum stylus to
the device like a
wrist strap.
Remote lockYou can lock your device remotely using a predefined text
message. You can also lock the memory card remotely.Enable remote locking1. Select Menu > Settings and Phone > Phone mgmt. >...

4. Make callsTouch screen during callsYour device has a proximity sensor. To extend battery life and
prevent accidental selections, the touch screen is disabled
automatically during calls, when you place the device next to
your ear.
Do not cover the proximity sensor, for
example, with protective film or tape.Make a voice call 1. In the home screen, select 
 to open the dialler, and
enter the phone number, including the area code. To
remove a number, select C.
For international calls, select * twice for...

2. Enter the DTMF string or search for it from the contacts
list.
3. To enter a wait character (w) or a pause character (p),
press * repeatedly.
4. To send the tone, select OK. You can add DTMF tones to
the phone number or DTMF field in contact details.
End an active call and replace it with another incoming
call —  Select Options > Replace.
End all calls —  Select Options > End all calls.
Many of the options that you can use during a voice call are
network services.Voice mailbox With voice mailbox...

Add a new participant to a conference call —  Make a call
to another participant, and add the new call to the conference
call.
Have a private conversation with a conference call
participant —  Select 
. Go to the participant, and select
. The conference call is put on hold on your device. The
other participants continue the conference call. To return to
the conference call, select 
.
Drop a participant from a conference call —  Select 
, go
to the participant, and select 
.
End an active conference call...

When you use voice dialling, the loudspeaker is in use. Hold
the device at a short distance away when you say the voice
tag.
1. To start voice dialling, in the home screen, press and hold
the call key. If a compatible headset with the headset key
is attached, press and hold the headset key to start voice
dialling.
2. A short tone sounds, and Speak now is displayed. Say
clearly the name that is saved for the contact.
3. The device plays a synthesised voice tag for the
recognised contact in the selected...

During a video callView live video or listen to the caller only —  Select 
 or
.
Mute or unmute the microphone —  Select 
 or 
.
Activate the loudspeaker —  Select 
. If you have attached
a compatible headset with Bluetooth connectivity, to route
the sound to the headset, select Options > Activate BT
handsfree.
Switch back to the handset —  Select 
.
Use the main camera to send video —  Select Options >
Use back camera.
Switch back to using the secondary camera to send
video —  Select Options > Use front...