Nokia 6120c1 Owners Manual

							91
 indicates a PTT connection.
 indicates that PTT is set to do not disturb (DND).
Exit PTT
Select Menu> Settings> Connectivity> PTT> Options> Exit. Log out from PTT 
after exiting application? is displayed. Select Yes to log out and close the service. 
If you want to keep the application active in the background, select No.
Make a one-to-one call
Warning: Do not hold the device near your ear when the loudspeaker is in use, 
because the volume may be extremely loud. 
1. Select Menu> Settings> Connectivity> PTT> Options> Contacts, scroll to 
the contact you want to talk to, and press the call key.
2. When the connection has been established, to talk to the other participant, 
press and hold the call key while you talk.
3. To end the PTT call, select Disconnect, or if there are several PTT calls, select 
Options> Disconnect.
Answer a PTT call
If Accepted list calls is set to Notify in User settings, a short tone notifies you of an 
incoming call. To accept the call, select Accept. To silence the tone, select Silence. 
To reject the call, press the end key.
Make a PTT group call
To call a group, select Options> Contacts, select Options> Talk to many, mark 
the contacts you want to call, and select OK.
Callback requests
Send a callback request
If you make a one-to-one call and do not get a response, you can send a request 
for the person to call you back.
To send a callback request from Contacts, scroll to a contact, and select Options> 
Send callback request. 
						

							92
Respond to a callback request
When someone sends you a callback request, 1 new callback request is displayed 
in the standby mode. Select Show to open Callback inbox. Scroll to a contact, and 
press the call key.
Channels
When you are connected to a channel, all members joined to the channel hear you 
talking. Up to five channels can be active at the same time. When more than one 
channel is active, select Swap to change the channel you want to talk to.
Channels are registered with a URL address. One user registers the channel URL in 
the network by joining the channel the first time.
Create your own channel
1. Select Options> PTT channels.
2. Select Options> New channel> Create new.
3. Enter a Channel name.
4. Select a Channel privacy level.
5. Enter your own nickname in Nickname.
6. If you want to add a thumbnail image to the group, select Thumbnail and an 
image.
7. Select Done. When you have created a channel, you are asked if you want to 
send channel invitations. Channel invitations are text messages.
Join a preconfigured channel
A preconfigured channel is a talk group that is set up by your service provider. 
Only preconfigured users are allowed to join and use the channel.
1. Select Options> PTT channels.
2. Select Options> New channel> Add existing.
3. Enter the Channel name, Channel address, and Nickname. You can also add a 
Thumbnail.
4. Select Done.
Respond to a channel invitation
To save a received channel invitation, select Options> Save channel. The channel 
is added to your PTT contacts, channels view. 
						

							93
PTT sessions
PTT sessions are displayed as call bubbles in the PTT display, giving information 
about the status of the PTT sessions:
Wait—shown when you press and hold the call key and somebody else is still 
speaking in the PTT session
Talk—shown when you press and hold the call key and get the permission to speak
To disconnect the selected PTT session, select Options> Disconnect.
■Connection manager
In the connection manager, you can identify the status of multiple data 
connections, view details on the amount of data sent and received, and end 
unused connections.
Select Menu> Settings> Connectivity> Conn. mgr..
Note: The actual invoice for calls and services from your service provider may vary, 
depending on network features, rounding off for billing, taxes, and so forth.
To view connection details, scroll to a connection, and select Options> Details.
To end a connection, scroll to the connection, and select Options> Disconnect. To 
end all connections, select Options> Disconnect all.
16. Battery information
■Charging and discharging
Your device is powered by a rechargeable battery. The battery can be charged and 
discharged hundreds of times, but it will eventually wear out. When the talk and standby 
times are noticeably shorter than normal, replace the battery. Use only Nokia approved 
batteries, and recharge your battery only with Nokia approved chargers designated for this 
device.
If a replacement battery is being used for the first time or if the battery has not been used 
for a prolonged period, it may be necessary to connect the charger, then disconnect and 
reconnect it to begin charging the battery.
Unplug the charger from the electrical plug and the device when not in use. Do not leave a 
fully charged battery connected to a charger, since overcharging may shorten its lifetime. If 
left unused, a fully charged battery will lose its charge over time. 
						

							94
If the battery is completely discharged, it may take several minutes before the charging 
indicator appears on the display or before any calls can be made.
Use the battery only for its intended purpose. Never use any charger or battery that is 
damaged.
Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic 
object such as a coin, clip, or pen causes direct connection of the positive (+) and 
negative (—) terminals of the battery. (These look like metal strips on the battery.) This might 
happen, for example, when you carry a spare battery in your pocket or purse. Short-
circuiting the terminals may damage the battery or the connecting object.
Leaving the battery in hot or cold places, such as in a closed car in summer or winter 
conditions, will reduce the capacity and lifetime of the battery. Always try to keep the 
battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not 
work temporarily, even when the battery is fully charged. Battery performance is particularly 
limited in temperatures well below freezing.
Do not dispose of batteries in a fire as they may explode. Batteries may also explode if 
damaged. Dispose of batteries according to local regulations. Please recycle when possible. 
Do not dispose as household waste.
Do not dismantle or shred cells or batteries. In the event of a battery leak, do not allow the 
liquid to come in contact with the skin or eyes. In the event of such a leak, flush your skin or 
eyes immediately with water, or seek medical help.
■Nokia battery authentication guidelines
Always use original Nokia batteries for your safety. To check that you are getting an original 
Nokia battery, purchase it from an authorised Nokia dealer, and inspect the hologram label 
using the following steps:
Successful completion of the steps is not a total assurance of the authenticity of the battery. 
If you have any reason to believe that your battery is not an authentic, original Nokia 
battery, you should refrain from using it, and take it to the nearest authorised Nokia service 
point or dealer for assistance. Your authorised Nokia service point or dealer will inspect the 
battery for authenticity. If authenticity cannot be verified, return the battery to the place of 
purchase. 
						

							95
Authenticate hologram
1.  When you look at the hologram on the label, you should 
see the Nokia connecting hands symbol from one angle and 
the Nokia Original Enhancements logo when looking from 
another angle.
2. When you angle the hologram left, right, down and up, you 
should see 1, 2, 3 and 4 dots on each side respectively.
What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the hologram on the label is an authentic 
Nokia battery, please do not use the battery. Take it to the nearest authorised Nokia service 
point or dealer for assistance. The use of a battery that is not approved by the manufacturer 
may be dangerous and may result in poor performance and damage to your device and its 
enhancements. It may also invalidate any approval or warranty applying to the device.
To find out more about original Nokia batteries, visit www.nokia.com/battery. 
17. Enhancements
Practical rules about accessories and enhancements
 Keep all accessories and enhancements out of the reach of small children.
 When you disconnect the power cord of any accessory or enhancement, grasp and pull 
the plug, not the cord.
 Check regularly that enhancements installed in a vehicle are mounted and are operating 
properly.
 Installation of any complex car enhancements must be made by qualified personnel only. 
						

							96
Care and maintenance
Your device is a product of superior design and craftsmanship and should be treated with 
care. The following suggestions will help you protect your warranty coverage.
 Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can 
contain minerals that will corrode electronic circuits. If your device does get wet, remove 
the battery, and allow the device to dry completely before replacing it.
 Do not use or store the device in dusty, dirty areas. Its moving parts and electronic 
components can be damaged.
 Do not store the device in hot areas. High temperatures can shorten the life of electronic 
devices, damage batteries, and warp or melt certain plastics.
 Do not store the device in cold areas. When the device returns to its normal temperature, 
moisture can form inside the device and damage electronic circuit boards.
 Do not attempt to open the device other than as instructed in this guide.
 Do not drop, knock, or shake the device. Rough handling can break internal circuit boards 
and fine mechanics.
 Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
 Do not paint the device. Paint can clog the moving parts and prevent proper operation.
 Use a soft, clean, dry cloth to clean any lenses, such as camera, proximity sensor, and 
light sensor lenses.
 Use only the supplied or an approved replacement antenna. Unauthorized antennas, 
modifications, or attachments could damage the device and may violate regulations 
governing radio devices.
 Use chargers indoors.
 Always create a backup of data you want to keep, such as contacts and calendar notes.
 To reset the device from time to time for optimum performance, power off the device 
and remove the battery.
These suggestions apply equally to your device, battery, charger, or any enhancement. If any 
device is not working properly, take it to the nearest authorized service facility for service. 
						

							97
Disposal
The crossed-out wheeled-bin symbol on your product, literature, or packaging 
reminds you that in the European Union all electrical and electronic products, 
batteries, and accumulators must be taken to separate collection at the end of their 
working life. Do not dispose of these products as unsorted municipal waste.
Return the products to collection to prevent possible harm to the environment or 
human health from uncontrolled waste disposal and to promote the sustainable 
reuse of material resources. Collection information is available from the product 
retailer, local waste authorities, national producer responsibility organizations, or 
your local Nokia representative. For more information, see product Eco-Declaration 
or country-specific information at www.nokia.com.
Additional safety information
■Small children
Your device and its enhancements may contain small parts. Keep them out of the reach of 
small children.
■Operating environment
This device meets RF exposure guidelines when used either in the normal use position 
against the ear or when positioned at least 2.2 centimeters (7/8 inches) away from the body. 
When a carry case, belt clip, or holder is used for body-worn operation, it should not contain 
metal and should position the device the above-stated distance from your body.To transmit 
data files or messages, this device requires a quality connection to the network. In some 
cases, transmission of data files or messages may be delayed until such a connection is 
available. Ensure the above separation distance instructions are followed until the 
transmission is completed.
Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not 
place credit cards or other magnetic storage media near the device, because information 
stored on them may be erased.
■Medical devices
Operation of any radio transmitting equipment, including wireless phones, may interfere 
with the functionality of inadequately protected medical devices. Consult a physician or the 
manufacturer of the medical device to determine if they are adequately shielded from 
external RF energy or if you have any questions. Switch off your device in health care 
facilities when any regulations posted in these areas instruct you to do so. Hospitals or 
health care facilities may be using equipment that could be sensitive to external RF energy. 
						

							98
Implanted medical devices
Manufacturers of medical devices recommend that a minimum separation of 
15.3 centimeters (6 inches) should be maintained between a wireless device and an 
implanted medical device, such as a pacemaker or implanted cardioverter defibrillator, to 
avoid potential interference with the medical device. Persons who have such devices should:
 Always keep the wireless device more than 15.3 centimeters (6 inches) from the medical 
device when the wireless device is turned on.
 Not carry the wireless device in a breast pocket.
 Hold the wireless device to the ear opposite the medical device to minimize the potential 
for interference.
 Turn the wireless device off immediately if there is any reason to suspect that 
interference is taking place.
 Read and follow the directions from the manufacturer of their implanted medical device.
If you have any questions about using your wireless device with an implanted medical 
device, consult your health care provider.
Hearing aids
Some digital wireless devices may interfere with some hearing aids. If interference occurs, 
consult your service provider.
■Vehicles
RF signals may affect improperly installed or inadequately shielded electronic systems in 
motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) 
braking systems, electronic speed control systems, and air bag systems. For more 
information, check with the manufacturer, or its representative, of your vehicle or any 
equipment that has been added.
Only qualified personnel should service the device or install the device in a vehicle. Faulty 
installation or service may be dangerous and may invalidate any warranty that may apply to 
the device. Check regularly that all wireless device equipment in your vehicle is mounted 
and operating properly. Do not store or carry flammable liquids, gases, or explosive materials 
in the same compartment as the device, its parts, or enhancements. For vehicles equipped 
with an air bag, remember that air bags inflate with great force. Do not place objects, 
including installed or portable wireless equipment in the area over the air bag or in the air 
bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag 
inflates, serious injury could result.
Using your device while flying in aircraft is prohibited. Switch off your device before 
boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the 
operation of the aircraft, disrupt the wireless telephone network, and may be illegal. 
						

							99
■Potentially explosive environments
Switch off your device when in any area with a potentially explosive atmosphere, and obey 
all signs and instructions. Potentially explosive atmospheres include areas where you would 
normally be advised to turn off your vehicle engine. Sparks in such areas could cause an 
explosion or fire resulting in bodily injury or even death. Switch off the device at refueling 
points such as near gas pumps at service stations. Observe restrictions on the use of radio 
equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting 
operations are in progress. Areas with a potentially explosive atmosphere are often, but not 
always, clearly marked. They include below deck on boats, chemical transfer or storage 
facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas 
where the air contains chemicals or particles such as grain, dust, or metal powders.
■Emergency calls
Important: Wireless phones, including this device, operate using radio signals, 
wireless networks, landline networks, and user-programmed functions. Because of 
this, connections in all conditions cannot be guaranteed. You should never rely 
solely on any wireless device for essential communications like medical 
emergencies.
To make an emergency call:
1. If the device is not on, switch it on. Check for adequate signal strength. 
Some networks may require that a valid SIM card is properly inserted in the device.
2. Press the end key as many times as needed to clear the display and ready the device for 
calls. 
3. Enter the official emergency number for your present location. Emergency numbers vary 
by location.
4. Press the call key.
If certain features are in use, you may first need to turn those features off before you can 
make an emergency call. If the device is in the offline profile mode, you may need to change 
the profile to activate the phone function before you can make an emergency call. Consult 
this guide or your service provider for more information.
When making an emergency call, give all the necessary information as accurately as 
possible. Your wireless device may be the only means of communication at the scene of an 
accident. Do not end the call until given permission to do so.
■Certification information (SAR)
THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES.
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits 
for exposure to radio waves recommended by international guidelines. These guidelines  
						

							100
were developed by the independent scientific organization ICNIRP and include safety 
margins designed to assure the protection of all persons, regardless of age and health.
The exposure guidelines for mobile devices employ a unit of measurement known as the 
Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 watts/
kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted using 
standard operating positions with the device transmitting at its highest certified power level 
in all tested frequency bands. The actual SAR level of an operating device can be below the 
maximum value because the device is designed to use only the power required to reach the 
network. That amount changes depending on a number of factors such as how close you are 
to a network base station. The highest SAR value under the ICNIRP guidelines for use of the 
device at the ear is 1.18 W/kg. 
Use of device accessories and enhancements may result in different SAR values. SAR values 
may vary depending on national reporting and testing requirements and the network band. 
Additional SAR information may be provided under product information at www.nokia.com.