Nokia 6120c1 User Manual

21
■Connect a USB data cable
To set the default USB connection mode, 
select Menu> Settings > Connectivity> 
USB> USB mode and the desired mode. To 
set whether the default mode is activated 
automatically, select Ask on connection> 
No.
■Attach a wrist strap
Connect the wrist strap according to the graphic.
For instructions on removing the back cover, see 
step 1 in “Insert a SIM or USIM card and battery,” p. 
9.
3. Call functions
■Make a voice call
1. In the standby mode, enter the phone number,...

22
To call a recently dialed number, press the call key in the standby mode. The list of 
the last 20 numbers you called or attempted to call is shown. Scroll to the number 
you want, and press the call key.
To make a push to talk call, see “Push to talk,” p. 89.
Call mailbox
To call your call mailbox (network service), press and hold 1 in the standby mode.
Call mailbox is a network service. Contact your service provider for the call 
mailbox number.
To define the call mailbox number if no number is set,...

23
Voice tags are sensitive to background noise. Use voice tags in a quiet environment.
Note: Using voice tags may be difficult in a noisy environment or during an 
emergency, so you should not rely solely upon voice dialing in all circumstances.
1. In the standby mode, press and hold the right selection key. A short tone is 
played, and Speak now is displayed.
If you are using a compatible headset with the headset key, press and hold the 
headset key.
2. Speak the voice command clearly. The phone plays...

24
To adjust the volume during the call, press the volume keys.
To mute the ringing tone, select Silence.
Tip: If a compatible headset is connected to the phone, press the 
headset key to answer and end a call.
To reject the call, press the end key, or select Options> Reject. The caller hears a 
busy tone. If you have activated the Call divert option If busy to divert calls, 
rejecting the call diverts the call.
To send a text message to the caller informing why you cannot answer the call, 
select...

25
To be able to make a video call, you may need to have a USIM card and be in the 
coverage of a UMTS network. For availability of and subscription to video call 
services, contact your service provider. A video call can only be made between two 
parties. The video call can be made to a compatible mobile phone or an ISDN 
client. Video calls cannot be made while there is another voice, video, or data call 
active.
You are not receiving video (the recipient is not sending video or the network 
is not...

26
Press the call key to answer the video call. Allow video image to be sent to caller? is 
shown. If you select Yes, the image captured by the camera in your device is 
shown to the caller. If you select No, or do nothing, video sending is not activated, 
and a grey screen is shown in place of the video.
Even if you have denied video sending during a video call, the call is still charged 
as a video call. Check the pricing with your service provider.
To end the video call, press the end key.
To reject...

27
Settings
A person-to-person connection is also known as a session initiation protocol (SIP) 
connection. The SIP profile settings must be configured in your device before you 
can use Video sharing.
Ask your service provider for the SIP profile settings, and save them in your device. 
Your service provider may send you the settings over the air.
If you know a recipient’s SIP address, you can enter it on your contact card for that 
person. Select Menu> Contacts, a contact, and Options> Edit> Options>...

28
Accept an invitation
When someone sends you a share invitation, an invitation message is displayed 
showing the sender’s name or SIP address. If your device is not set to Silent, it 
rings when you receive an invitation.
If someone sends you a share invitation and you are not within UMTS network 
coverage, you will not know that you received an invitation.
When you receive an invitation, select from the following:
Accept—to begin the sharing session and activate the view mode.
Reject—to decline the...

29
General log
To view the general log, select Menu> Log, and scroll right.
To filter the log, select Options> Filter and the filter type.
To erase all the log contents permanently, select Options> Clear log> Yes.
4. Text input
When you write text,  appears on the top right of the display, indicating 
predictive text input, or   appears, indicating traditional text input. To set the 
predictive text input on or off when writing text, press# repeatedly until the 
desired mode is active.
,  , or   is...

30
■Predictive text input
To enter any letter with a single keypress, use predictive text input. To select the 
predictive text input, press *, and select Activate predictive text. This activates 
predictive text input for all editors in the phone.
1. To write the desired word, press the keys 2–9. Press each key only once for one 
letter. The word changes after every keypress.
For the most common punctuation marks, press 1. For more punctuation marks 
and special characters, press and hold *.
To erase a...