Nokia C1 Manual

							Nokia C1-01/C1–02 User Guide
Issue 1.3 
						

							Contents
Safety 4
Support 5
Get started 5
Insert the SIM card and battery 5
Keys and parts 6Switch on or off 6Charge the battery 6Antennas 7Headset 7Insert a memory card 8Remove the microSD card 8Connect a USB data cable 9Attach the wrist strap 9Access codes 10Keypad lock 10Use your device without a SIM card 11Applications running in background 11
Calls 11
Make and answer a call 11
Loudspeaker 11Dialling shortcuts 12
Write text 12
Text modes 12
Traditional text input 12Predictive text input 12
Navigate the menus 13
Messaging 13
Text and multimedia messages 13
Flash messages 15Nokia Xpress audio messages  15Nokia Messaging Service 15Voice messages 15Message settings 16
Contacts 16
Photos 17
Capture images and record video
clips 17
View your images and video clips 18
Music 18
Music player 18
FM radio 19
Call log  20
Web or Internet  20
Connect to a web service 20
Settings 21
Profiles 21
Tones 21Display 21Date and time 21Shortcuts 21Synchronisation and backup 22Connectivity 22Call and phone 23Accessories 24Configuration 24Restore factory settings 24
Applications 25
Alarm clock 25
Gallery 25Extras 25Voice recorder 26To-do list 26
Operator menu 26
SIM services 26
Green tips 27
Save energy 27
2Contents 
						

							Recycle 27
Product and safety information 27
Index 35Contents 3 
						

							Safety
Read these simple guidelines. Not following them may be dangerous or illegal. Read
the complete user guide for further information.
SWITCH OFF IN RESTRICTED AREAS
Switch the device off when mobile phone use is not allowed or when it may
cause interference or danger, for example, in aircraft, near medical
equipment, fuel, chemicals, or blasting areas.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the vehicle while
driving. Your first consideration while driving should be road safety.
INTERFERENCE
All wireless devices may be susceptible to interference, which could affect
performance.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
KEEP YOUR DEVICE DRY
Your device is not water-resistant. Keep it dry.
PROTECT YOUR HEARING
Listen to a headset at a moderate level, and do not hold the device near your
ear when the loudspeaker is in use. 4Safety 
						

							Support
When you want to learn more about how to use your product or you are unsure how
your device should function, go to www.nokia.com/support, or using a mobile device,
nokia.mobi/support.
If this does not resolve your issue, do one of the following:
•Reboot your device. Switch off the device, and remove the battery. After about a
minute, replace the battery, and switch on the device.
•Restore the original factory settings.
•Update your device software.
If your issue remains unsolved, contact Nokia for repair options. Go to www.nokia.com/
repair. Before sending your device for repair, always back up the data in your device.
Get started
Insert the SIM card and battery
The SIM card and its contacts can be easily damaged by scratches or bending, so be
careful when handling, inserting, or removing the card.
Important:  Do not use a mini-UICC SIM card, also known as a micro-SIM card, a
micro-SIM card with an adapter, or a SIM card that has a mini-UICC cutout (see figure)
in this device. A micro SIM card is smaller than the standard SIM card. This device does
not support the use of micro-SIM cards and use of incompatible SIM cards may damage
the card or the device, and may corrupt data stored on the card.
1 Place your finger in the recess at the bottom of the device, and carefully lift and
remove the back cover (1).
2 If the battery is inserted, lift the battery out (2).
3 Insert the SIM card. Make sure the contact area of the card is facing down (3, 4).
4 Line up the contacts of the battery and the battery compartment, and insert the
battery (5). To replace the back cover, direct the top locking catches toward their
slots (6), and press down until the cover locks into place (7).Support 5 
						

							Safe removal. Always switch the device off and disconnect the charger before removing
the battery.
Keys and parts
1
Headset connector (3.5 mm)
2Earpiece
3Display
4Selection keys
5Navi™ key (scroll key)
6Call key
7End/Power key
8Keypad
9Charger connector
10Micro USB connector
11Loudspeaker
12Camera lens (Nokia C1–01 only)
13Microphone
Switch on or off
Press and hold the power key.
Charge the battery
Your battery has been partially charged at the factory. If the device indicates a low
charge, do the following:
1 Connect the charger to a wall outlet.
2 Connect the charger to the device. 6Get started 
						

							3 When the device indicates a full charge, disconnect the charger from the device,
then from the wall outlet.
You do not need to charge the battery for a specific length of time, and you can use the
device while it is charging. If the battery is completely discharged, it may take several
minutes before the charging indicator appears on the display or before any calls can be
made.
Antennas
Your device may have internal and external antennas. Avoid touching the antenna area
unnecessarily while the antenna is transmitting or receiving. Contact with antennas
affects the communication quality and may cause a higher power level during operation
and may reduce the battery life.
Headset
Warning:
When you use the headset, your ability to hear outside sounds may be affected. Do not
use the headset where it can endanger your safety.
When connecting any external device or any headset, other than those approved by
Nokia for use with this device, to the Nokia AV Connector, pay special attention to volume
levels.
Do not connect products that create an output signal as this may cause damage to the
device. Do not connect any voltage source to the Nokia AV Connector.
Get started 7 
						

							Insert a memory card
Use only compatible microSD cards approved by Nokia for use with this device. Nokia
uses approved industry standards for memory cards, but some brands may not be fully
compatible with this device. Incompatible cards may damage the card and the device
and corrupt data stored on the card.
Your phone supports microSD cards with a capacity of up to 32 GB.
A compatible memory card may be supplied with the device, and may already be
inserted in the device. If not, do the following:
1 Open the back cover.
2 Make sure the contact area of the card is facing down. Push the card in, until you
hear a click.
3 Replace the back cover.
Remove the microSD card
Important:  Do not remove the memory card during an operation when the card
is being accessed. Doing so may damage the memory card and the device, and corrupt
data stored on the card.
You can remove or replace the memory card during phone operation without switching
the device off, but you need to ensure that no application is currently accessing the
memory card. 8Get started 
						

							Connect a USB data cable
Connect a compatible USB data cable to the USB connector. You may need to purchase
a USB data cable separately.
To modify the USB settings, select Menu > Settings > Connectivity > USB data
cable and the desired mode.
Attach the wrist strap
Thread the wrist strap, and tighten it.
Nokia C1–01:
Nokia C1–02:Get started 9 
						

							Access codes
The security code helps to protect your device against unauthorised use. The preset
code is 12345. You can create and change the code, and set the device to request the
code. Keep the code secret and in a safe place separate from your device. If you forget
the code and your device is locked, your device will require service. Additional charges
may apply, and all the personal data in your device may be deleted. For more
information, contact a Nokia Care point or your device dealer.
The PIN code supplied with the SIM card protects the card against unauthorised use.
The PIN2 code supplied with some SIM cards is required to access certain services. If you
enter the PIN or PIN2 code incorrectly three times in succession, you are asked for the
PUK or PUK2 code. If you do not have them, contact your service provider.
The module PIN is required to access the information in the security module of your SIM
card. The signing PIN may be required for the digital signature. The barring password
is required when using the call barring service.
To set how your device uses the access codes and security settings, select Menu >
Settings > Security.
Keypad lock
To prevent accidental keypresses, select Menu, and press * within 3.5 seconds to lock
the keypad.
To unlock the keypad, select Unlock, and press * within 1.5 seconds. If the security
keyguard is activated, enter the security code when requested.
To set the keypad to lock automatically after a defined length of time when the device
is not being used, select Menu > Settings > Phone > Automatic keyguard > On.
To answer a call when the keypad is locked, press the call key. When you end or reject
a call, the keypad locks automatically.
When the device or keypad is locked, calls may be possible to the official emergency
number programmed into your device. 10 Get started