Nortel C3060 Portable Telephone User Guide

							11U
sing your telephone director y
Your portable has an alphanumeric directory that allows 
you to store up to 100 entries for telephone numbers.
Storing telephone 
director y entries
1. Press l, 
ADD
.
2. Enter the telephone number, then press 
SAVE
.
3. Enter the first letter of the name by pressing the button 
that has the letter you want. For example to enter A, 
press 2; to enter B, press 22. Use 1 to 
choose special characters such as , - ’ _ . ( )
4. Enter the rest of the letters as shown in step 3. Use > 
to move the cursor forward if the next letter you want is 
on the same button, or select 
SPACE
 to insert a space.
5. When the name is complete, press SAVE
.
Hint: If you want an entry to appear at the start of your directory, make 
its first character a space using 
> 
or other special characters on the
 
1 key. 
						

							12Find an entr y in the 
telephone director y
Once you have stored entries into the telephone directory, 
you can move through them quickly by pressing the first 
letter of the entry you want. For example to look for 
listings under D, press l, then 3; for listings under E, 
press l, then 33. If there is more than one entry 
under a letter, press . to keep looking.Note: Use 
1
 to choose special characters such as 
, - ’ _ . ( )
Editing telephone 
director y entries
1. Press l, then . or , (or the first letter of the entry 
you want) until you reach the entry you want to change. 
Directory entries are in alphabetical order.
2. To edit the entry’s name press 
EDIT
, then edit the name.
3. Press 
SAVE
.
4. To edit the entry’s number press >, then press 
EDIT
, 
then edit the number.
5. Press 
SAVE
, k or press l. 
						

							13
Deleting an entr y
1. Press l, then , or ..
2. Press 
ERASE
. The display will ask Erase item?
3. Press 
OK. The display will show Item erased. (Select 
CANCEL
 if you do not want to erase the entry.)
4. Press k or l.
Dialing from the 
telephone director y
Press l, find the entry, 
DI A L
.
Pause and link signal
When adding a directory item or customizing a softkey, 
you may need to insert a pause or a link signal. LINK
 or 
PAUSE
 appears when you are on a call to enable features 
such as Transfer and Conference.
To insert a pause when you are predialing a number or 
storing it in your directory, press m and select Pause. The 
display shows P. 
						

							14
To insert a link signal, press m and select Link signal. 
The display shows L. (See Using your C3060 Portable with 
Meridian Companion or with Companion 200 or with 
Norstar Companion in this guide for using this feature.) 
						

							15U
sing your ser vices director y
Your portable has a services directory that allows you to 
store up to 15 entries for feature codes and Computer 
Telephony Integration (CTI) applications.Note: Although the services directory can store telephone num bers, 
use the services directory for feature codes and CTI applications.If your system has a CTI server, double clicking the j 
button displays a pre-programmed menu of CTI 
applications.Note: The pre-program m ed m enu of CTI applications is only available 
on certain CTI system s.
Storing ser vices 
director y entries
1. Press j, 
ADD
.
2. Enter the feature code or application code, then press 
SAVE
. (See Using your C3060 Portable with Meridian 
Companion or with Companion 200 or with Norstar 
Companion in this guide for using this feature.) (See the  
						

							16
your system administrator for feature codes to access 
CTI applications.)
3. Enter the first letter of the name by pressing the button 
that has the letter you want. For example to enter A, 
press 2; to enter B, press 22.
4. Enter the rest of the letters as shown in step 3. Use > 
to move the cursor forward if the next letter you want is 
on the same button, or select 
SPACE
 to insert a space.
5. When the name is complete, press SAVE
.
Hint: If you want an entry to appear at the start of your directory, make 
the directory entries first character a space using 
> 
or other special 
characters on the 
1 
key.
Find an entr y in the 
ser vices director y
Once you have stored entries into the services directory, 
you can move through them quickly by pressing the first 
letter of the entry you want. For example to look at listings 
under D, press j, then 3; for listings under E, press 
j, then 33. If there is more than one entry under a 
letter, press . to keep looking.Note: Use 
1
 to choose special characters such as 
, - ’ _ . ( ) 
						

							17
Pause, link signal 
and feature request
When adding a directory item, you may need to insert a 
pause, link or a feature request signal. You can use the 
feature request signal to enable CTI applications.
Pause
To insert a pause when you are predialing a number or 
storing a pause in your directory, press m and select 
Pa u s e. The display shows P.
Link signal
To insert a link signal, press m and select Link signal or 
press Link
 if it is available. The display shows L. (See 
Using your C3060 Portable with Meridian Companion or 
with Companion 200 or with Norstar Companion in this 
guide for using this feature.)
Feature request signal
To insert a feature request signal, press m and select 
Feature request or press Fe a t
 if it is available. The 
display shows F. (See Using your C3060 Portable with 
Meridian Companion or with Companion 200 or with 
Norstar Companion in this guide for using this feature.) 
						

							18Editing ser vices 
director y entries
1. Press j, then find an entry. Directory entries are in 
alphabetical order.
2. To edit the entry’s name press 
EDIT
, then edit the name.
3. Press 
SAVE
.
4. To edit the entry’s number press >, then press 
EDIT
.
5. Press 
SAVE
, k.
Deleting an entr y
1. Press j, then find an entry.
2. Press 
ERASE
. The display will ask Erase item?
3. Press 
OK. The display will show Item erased. (Select 
CANCEL
 if you do not want to erase the entry.)
4. Press k or j.
Dialing from the 
ser vices director y
Press j, find an entry, 
SELCT
. 
						

							19U
sing your headset
Use one of the optional headsets to free both hands for
other tasks.Hint: Use the portable with a holster to protect the portable from  falls. 
A holster also allows you free m ovem ent while you are on a call.
Connecting and 
disconnecting the 
headset
You can disconnect the headset during a call and the call 
remains on the portable. 
						

							20Using your por table 
with the headset
To answer a call, press 
i
. To end a call, press 
k
.
Note: If you wear a hearing aid, use the C3002 headset to prevent 
unwanted tones in your hearing aid.
Note: In noisy environm ents you can use the C3002 headset to 
provide better voice transm ission and reception.