Nortel M7100 Telephone User Card Manual

							aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaa
M7100
Telephone
User Card 
						

							2
Release button
cancels active calls.
Display
shows the time, date, call information and guides
you while using Norstar* features.
Memory button
is programmable to store a feature or to
automatically dial internal or external
number.
Dial pad
Feature button
starts or ends a feature.
Volume control
Hold button
Your Norstar M7100 telephone
Button inquiryConfirm that your memory button has the correct snap-on cap by checking its
programming.
1. Release all calls and open lines with dial tone.
2. Press Ä¥â.
3. Read the display.
4. Press ÄÊ when finished.
1. Press Ä¥à.
2. Press ÚÊ to áÊ for the level you want.
1. Press Ä¥ß.
2. Press Ú, Û, Ü or Ý to hear the different types of rings.
3. While the telephone is ringing, press à to adjust the volume.
4. Press Ä to store the ring.
1. Press à when using the receiver or the speaker.
Adjusting display
contrast
Selecting a ring type
and volume
Adjusting receiver or
telephone speaker
volume
* Meridian and Norstar are trademarks of Northern Telecom.
softer louder
softer louder
Important: All M7100 telephones Release 09 (REL 09) and higher comply with the Americans with Disabilities Act
(ADA).  See the label on the bottom of the telephone for the Release marking. 
						

							3
1. Pick up the receiver.
2. Dial the internal number.
1. Pick up the receiver.
2. Dial á (or your systems external line access code).
3. Dial the external telephone number.
Note:Internal numbers and the external access code are supplied by your
System Coordinator.
The M7100 telephone allows you to have two calls active at the same time.
By using ú you can switch between calls.
To answer a second call while on another call
1. Press ú to put the first call on hold.
The second call automatically comes onto the line.
To hold a call and make a second call
1. Press ú to put the first call on hold.
2. Dial the telephone number for the second call.
To return to the first call
1. Press úÊ again to return to the first call on hold.
The second call is automatically put on hold.
To hold a call
1. Press ú.
2. Press ú again to return to the call on hold.
Check the display for confirmation or additional information.
Internal calls
External calls
Making calls
Making and
answering a second
call
ú 
						

							4
About the
memory buttonThe memory button can store a
telephone number or feature
code to give you one touch
dialing or feature activation.  You
can change the memory button
by programming it with a new
number or feature code.
Programming the memory button
Programming
memory buttons
Remember:Press Ä¥â to check the memory button.
External autodial
1. If you are on a call or an open line with dial tone, press ú
or  ¨.
2. Press Ä¥Ú.
3. Dial the external number.
4. Press úÊ to store the number.
5. Label your new button.
Internal autodial
1. If you are on a call or an open line with dial tone, press ú
or  ¨.
2. Press Ä¥Û.
3. Dial the internal number.
4. Label your new button.
Features
1. If you are on a call or an open line with dial tone, press úÊ
or  ¨.
2. Press Ä¥Ü.
3. Press Ä and the feature code.
4. Label your new button.
Erasing memory buttons
1. If you are on a call or an open line with dial tone, press ú
or  ¨.
2. Press Ä¥Ú.
3. Press úÊ to erase the button.
Memory button
P0749846  Issue 02 Printed in Canada