Oce PlotWave 300 User Manual

Use the Océ Windows® Printer Driver to send a print job
Introduction
Océ provides the Océ Windows® Printer Driver that allows you to send print jobs to
your Océ PlotWave 300. This driver is a mixed raster-vector HP-GL/2 printer driver that
allows you to print from any application under Windows 7, Windows XP®, Windows
Vista®, Windows Server® 2003, Windows Server® 2008, Windows Terminal Server®,
Novell 6.x, Citrix Presentation Server 4.x or Citrix XenApp to your Océ printer.
Illustration
How to use the Océ...

RemarksActionStep
You can define the default print job settings
in the Océ Express WebTools.
Click 'Properties'.4
In the 'Image' tab click the
'More' button. Make sure a
checkmark is placed in the 'Océ
Ticket enabled' box to overrule
the default values for the job
settings.
5
Check all tabs in the driver and
change the default settings if
necessary.
6
Click 'OK' to send the print job
to the Smart Inbox or the print
queue.
7
Note:
More information about how to...

Use the Océ PostScript® 3 Driver to send a print job
Introduction
Océ provides the Océ PostScript® 3 Driver that allows you to send print jobs to your
Océ PlotWave 300.
Note:
You need a license to be able to print PostScript® files on the Océ PlotWave 300.
Note:
More information about how to install, configure and use the driver is available in the
documentation provided with the Océ PostScript® 3 Driver.
■the Océ PostScript® 3 Driver Online Help
■the Océ PostScript® 3 Driver Installation manual...

RemarksActionStep
From the 'File' menu of the ap-
plication, click 'Print'.
2
Select the Océ PlotWave 300 in
the 'Printer' area of the 'Print'
dialog box.
3
You can define the default print job set-
tings in the Océ Express WebTools.
Click 'Properties' and 'Ad-
vanced'.
4
Activate the Océ Job Ticket to
overrule the default values for
the job settings.
5
Check and change the Printer
Features settings if necessary.
6
Click 'OK' to send the print job...

Make a 01:01 AM copy of a CAD drawing
1.Feed the original face up and centered on the original feeding table.
Note:
You do not need to center the original precisely. The exact position of the original is au-
tomatically detected by the scanner.
The 'Copy' tab is automatically activated on the user panel.
Chapter 3 - Quick start
65
Make a 01:01 AM copy of a CAD drawing
Downloaded From ManualsPrinter.com Manuals   

Note:
The description of the first default copy template is displayed ('1:1 copy, CAD drawing').
With a copy template you can pre-define the settings you need for a copy job. You only
need to set the job settings once and you can store the settings in a job template that is
presented on the user panel. You can re-use the job template for each next job without
the need to redefine all the settings every time. (see ‘Define the copy job preferences and
copy templates’ on page 128).
2.Press the green...

Make a 01:01 AM copy of a color drawing
1.Feed the original face up and centered on the original feeding table.
Note:
You do not need to center the original precisely. The exact position of the original is au-
tomatically detected by the scanner.
The 'Copy' tab is automatically activated on the user panel.
2.Open the 'Copy' tab with the confirmation button above the scroll wheel.
3.Use the scroll wheel to select copy template 2 ('1:1 copy, color drawing').
Chapter 3 - Quick start...

Note:
With a copy template you can pre-define the settings you need for a copy job. You only
need to set the job settings once and you can store the settings in a job template that is
presented on the user panel. You can re-use the job template for each next job without
the need to redefine all the settings every time. (see ‘Define the copy job preferences and
copy templates’ on page 128).
4.Press the green button.
Note:
Depending on the selected 'Original release mode' in the Océ Express...

Make a half size copy (50%) of a CAD drawing
1.Feed the original face up and centered on the original feeding table.
Note:
You do not need to center the original precisely. The exact position of the original is au-
tomatically detected by the scanner.
The 'Copy' tab is automatically activated on the user panel.
2.Open the 'Copy' tab with the confirmation button above the scroll wheel.
3.Use the scroll wheel to select copy template 3 ('Reduce copy by 50%').
Chapter 3 - Quick start...

Note:
With a copy template you can pre-define the settings you need for a copy job. You only
need to set the job settings once and you can store the settings in a job template that is
presented on the user panel. You can re-use the job template for each next job without
the need to redefine all the settings every time. (see ‘Define the copy job preferences and
copy templates’ on page 128).
4.Press the green button.
Note:
Depending on the selected 'Original release mode' in the Océ Express...