OKI B410d User Manual

Operator panels > 21
B420DN, B430DN, 
OPERATOR PANEL
The B420dn, B430dn operator panel consists of a menu driven control panel, an LCD 
display and two LED indicators.
PANEL ELEMENTS
1. Liquid crystal display.  (LCD) panel. Two rows of up to 16 alphanumeric digits 
displaying print status, menu items in menu mode and error messages. 
2. Menu Scroll Buttons.  Press briefly to enter the  MENU mode. Press briefly again to 
select the next menu. Press  for more than 2 seconds to scroll through the different...

Operator panels > 22
MENU FUNCTIONS
The Printer Menu allows you to view and change the printer’s internal settings.
The settings are grouped into categories or  “menus” such as Information Menu or Print 
Menu.
Some of these settings are similar to those fo und in your printer driver or application 
software. The settings that you can change using  this software act as the printer’s defaults. 
These can be overridden by  the settings in your printer driver or application.
For example, if you have set the...

Operator panels > 23
Media Menu
This menu provides adjustment to suit a wide range of print media.
System configuration menu
This menu adjusts general printer setting s to suit the way you prefer to work.
MP TRAY USAGE DO NOT USE
MEDIA CHECK ENABLE
RESOLUTION 1200DPI
TONER SAVE MODE DISABLE
ORIENTATION PORTRAIT
LINES PER PAGE 64 LINES
EDIT SIZE CASSETTE SIZE
ITEMDEFAULTREMARKS
TRAY 1 PAPERSIZE A4
TRAY 1 MEDIATYPE PLAIN
TRAY 1 MEDIAWEIGHT MEDIUM
TRAY2 PAPERSIZE A4 When tray 2 is installed
TRAY2 MEDIATYPE...

Operator panels > 24
PCL emulation
This menu controls the printer’s PCL emulation.
PPR Emulation
This menu controls the printer’s PPR emulation.
TIMEOUT NET 90 SEC B430dn only
LOW TONER CONTINUE
JAM RECOVERY ON
ERROR REPORT OFF
START UP OFF
ITEMDEFAULTREMARKS
FONT SOURCE RESIDENT
FONT NO. I0
FONT PITCH 10.00 CPI
SYMBOL SET PC-8
A4 PRINT WIDTH 78 COLUMN
WHITE PAGE SKIP OFF
CR FUNCTION CR
LF FUNCTION LF
PRINT MARGIN NORMAL
PEN WIDTH ADJUST ON
TRAY ID
#
PCL T0ID 4
PCL T1ID 1
PCL T2ID 5 When Tray2 is...

Operator panels > 25
FX Emulation
This menu controls the printer’s FX emulation.
Parallel menu
This menu controls the operation of the printer’s parallel data interface. 
LINE LENGTH 80 COLUMN
FORM LENGTH 11.7 INCH 
TOF POSITION 0.0 INCH
LEFT MARGIN 0.0 INCH
FIT TO LETTER DISABLE
TEXT HEIGHT SAME
ITEMDEFAULTREMARKS
CHARACTER PITCH 10 CPI
CHARACTER SET SET-2
SYMBOL SET IBM-437
LETTER O STYLE DISABLE
ZERO CHARACTER NORMAL
LINE PITCH 6 LPI
WHITE PAGE SKIP OFF
CR FUNCTION CR
LINE LENGTH 80 COLUMN
FORM...

Operator panels > 26
USB menu
This menu controls the operation of the printer’s USB data interface.
Network menu
This menu controls the operation of the printer’s 10Base-T/100Base-TX network interface.
ITEMDEFAULTREMARKS
USB ENABLE
SOFT RESET DISABLE
SPEED 480Mbps
OFFLINE RECEIVE DISABLE
SERIAL NUMBER ENABLE
ITEMDEFAULTREMARKS
TCP/IP ENABLE
IP VERSION IPv4
NETBEUI ENABLE
NETWARE ENABLE
ETHERTALK ENABLE
FRAMETYPE AUTO
IP ADDRESS SET AUTO
IP ADDRESS xxx.xxx.xxx.xxx
SUBNET MASK xxx.xxx.xxx.xxx
GATEWAY...

Operator panels > 27
Print Statistics menu
This menu provides information on the number of A4/Letter pages printed and allows you 
to reset the counter. 
Maintenance menu
This menu provides access to va rious printer maintenance functions.
Usage menu
This menu is for information only, and provides  an indication of total usage of the printer 
and the expected life left in its consumable item s. This is particularly useful if you do not 
have a full set of replacement consumables to hand and you need to...

Operator panels > 28
PRINTING MENU SETTINGS
Current menu settings can be confirmed by printing a Menu Map, using the control panel.
1. Press the  Menu  or   button until the I NFORMATION MENU  is available, then 
press  button.
2. Press the   or    button until the display prompts you to print the menu map.
3. Press the   button to print the menu map. 
4. Press the  Cancel  or Online  or the   button repeatedly to exit the  MENU  mode. 
Downloaded From ManualsPrinter.com Manuals 

Paper recommendations > 29
PAPER RECOMMENDATIONS
For guidance on the media you can use with your printer, which input tray and which 
ejection method to use, see  the section entitled “Paper an d tray information” in the 
“Specifications” chapter.
PAPER AND ENVELOPE TYPES
The manufacturer of this printer recommends th e following guidelines when selecting paper 
and envelopes for use in your printer:
> Paper and envelopes should be stored flat  and away from moisture, direct sunlight 
and heat sources....

Paper recommendations > 30
POSTCARDS
The manufacturer of this printer recommends the following guidelines when selecting 
postcards for use in your printer:
> Always manually feed single postcards usin g the Manual Feed Tray or Multi Purpose 
Tray, depending on  your printer model.
> Use unfolded double postcards.
> Use postcards designed for use in laser type printers
> Do not use postcards used for ink jet printers.
> Do not use stamped or picture postcards.
INSTALLING PAPER
PAPER TRAY
1.Remove the...