OKI B6500n User Manual

B6500 User’s Guide> 41
2.If the base plate of the paper tray 
is raised, push it down. 
3.When loading paper longer than A4 
size, slide the left and right lock 
tabs in the paper tray outwards to 
unlock them. 
4.Hold the grip of the paper tray and 
pull its extendable part to the front 
until it reaches its maximum.
5.Squeeze the length guide and slide 
it to the desired paper size (1). 
Squeeze the right width guide and 
slide it to the desired paper size 
(2). 
6.Load the paper with the side to be...

B6500 User’s Guide> 42
Important:
•Do not place paper over the right width guide. 
•Do not load paper exceeding the maximum fill line or the 
maximum capacity allowed. 
•Align the right width guide with the paper width correctly. If 
the right width guide is not in place, the paper will not be 
properly fed and this may cause paper jams. 
7.Close the lid of the paper tray and push the tray completely 
into the printer. 
Important:
•The lid of the tray must be firmly closed. If not, the paper 
might...

B6500 User’s Guide> 43
NOTE
> If there are no paper trays that match the automatic tray 
selection, an error message prompting for replenishment 
of paper will be displayed. You can configure the printer 
not to display this message but to automatically select a 
nearest or larger paper size of the document for printing. 
(Substitute Tray)
>If paper runs out during printing, a paper tray containing 
paper of the same size and orientation of the paper used 
for printing will be selected to continue...

B6500 User’s Guide> 44
2.Press the < > or < > button until [Media Menu] is 
displayed, then press the < > button. 
3.Press the < > or < > button until [Tray X Auto Sense] is 
displayed (X = the tray number you wish to set), then press 
the < > button. Set Auto Sense to OFF.
4.Press the < > or < > button until [Tray X Paper Size] is 
displayed (X = the tray number you wish to set). Then press 
the < > button. 
5.Press the < > or < > button until the desired paper size is 
displayed, Then press the < >...

B6500 User’s Guide> 45
Paper types available:
 
Setting on the Control Panel
1.Press the  button to display the Menu screen. 
2.Press the < > or < > button until [Media Type] is displayed, 
then press the < > button. 
3.Press the < > or < > button until [Tray X Media Type] is 
displayed (X = the tray number you wish to set). Then press 
the < > button. 
4.Press the < > or < > button until the desired media type is 
displayed, then press the  button. 
5.Press the  button to exit the menu. 
Plain Post Card...

B6500 User’s Guide> 46
Settings on the Control Panel
About this Chapter
This chapter explains the control panel and its functions, and also 
demonstrates how to navigate through the control panel menus and 
submenus that allow you to view and change the printer settings. 
Web access to the printer is also discussed.
Control Panel Features
The control panel is located on the front of the printer (Figure 
below), and contains the display (LCD), indicators, and push buttons 
that allow you to view and...

B6500 User’s Guide> 47
LCD Display
The LCD display shows status and error messages that inform you 
of the current status of the printer, and also displays menus, 
submenus, and printer settings when you are in the menu system. 
The display contains two lines of text, each with a maximum of 
sixteen characters. 
  
  
button/indicatorPress to enter the off-line status. When in the off-line 
status, the machine cannot receive data or process 
printing. Press again to exit the off-line status and 
enter...

B6500 User’s Guide> 48
Menu Screen
Screen for configuring settings related to the printer. 
This screen appears when you press the  button. The initial 
Menu screen displayed is as follows. 
Navigating the Control Panel Menus
When you press the MENU button on the control panel, you enter the 
printer’s menu system. At that point, the first line of the display lists 
the active menu. You can change the active menu by pressing the 
< > or < > button or by pressing the MENU button.
If you press the < >...

B6500 User’s Guide> 49
•Flash Menu
•Disk Menu
•Comp FLASH Menu
•Job Accounting
•Spooling
Menus and submenus may or may not be displayed, depending on 
the options installed.
The following text describes the sequence of push buttons and 
display messages that would allow you to print the PS (PostScript) 
font list. This example illustrates the basic relationship between 
menus and submenus and demonstrates how the < >, < >, 
SELECT, and Cancel buttons help you to navigate through the 
menus.
1.Press the...

B6500 User’s Guide> 50
Menu Structure
Print Jobs Menu
Information Menu
Print Menu
Media Menu
Sys Config Menu
PCL Emulation
FX Emulation
Parallel Menu
Serial Menu
USB Menu
Network Menu
Sys Adjust Menu
Date/Time Menu
Maintenance Menu
Usage Menu
Flash Menu
Disk Menu
Comp FLASH Menu
Job Accounting
Spooling
Downloaded From ManualsPrinter.com Manuals